School of Chemistry - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 14
-
ItemHighly Efficient Luminescent Solar Concentrators by Selective Alignment of Donor-Emitter Fluorophores(AMER CHEMICAL SOC, 2019-04-23)Vertically aligning fluorophores to the surface of a waveguide is known to be an effective approach to improve the optical quantum efficiency (OQE) of luminescent solar concentrators (LSCs). While the chromophore alignment assists waveguiding of the emitted photons to the LSC edges, it also significantly reduces the light-harvesting properties of the LSC. We report here a fluorophore pair consisting of a sphere-shaped energy donor and a rod-shaped emitter that was incorporated in LSCs to provide selective fluorophore alignment to address the reduced incident-light absorption issue. A liquid-crystal polymer matrix was used to perpendicularly align the rod-shaped acceptors to a favorable orientation for light guiding, while the sphere-shaped donor was randomly oriented to maintain its light-absorbing properties. The OQE of LSC devices with this selectively aligned donor-acceptor fluorophore system is 78% without significant loss of light-harvesting capability.
-
ItemCompetitive Triplet Formation and Recombination in Crystalline Films of Perylenediimide Derivatives: Implications for Singlet Fission(AMER CHEMICAL SOC, 2020-05-28)Developing photostable compounds that undergo quantitative singlet fission (SF) is a key challenge. As SF necessitates electron transfer between neighboring molecules, the SF rate is highly sensitive to intermolecular coupling in the solid state. We investigate SF in thin films for a series of perylenediimide (PDI) molecules. By adding different substituents at the imide positions, the packing of the molecules in the solid state can be changed. The relationship between SF parameters and the stacked geometry in PDI films is investigated, with two-electron direct coupling found to be the main SF mechanism. Time-resolved emission and transient absorption data show that all of the PDI films undergo SF although with different rates and yields varying from 35 to 200%. The results show that PDI1 and 2, which are stacked PDI pairs twisted out of alignment along the highest occupied molecular orbital to lowest unoccupied molecular orbital transition, exhibit faster and more efficient SF up to 200% yield. We demonstrate that both triplet formation and decay rates are highly sensitive to the ordering of the molecules within a film. The results of this study will assist in the design of optimized structures with a fast SF rate and low recombination rate that are required for useful light harvesting applications.
-
ItemFRET-enhanced photoluminescence of perylene diimides by combining molecular aggregation and insulation(Royal Society of Chemistry, 2020-07-14)The photoluminescence quantum yield (ϕPL) of perylene diimide derivatives (PDIs) is often limited by aggregation caused quenching (ACQ) at high concentration or in the neat solid-state. Energy transfer in high dye concentration systems is also a key factor in determining ϕPL as a result of energy funneling to trap sites in the sample. By tuning the substituents, we present two classes of PDIs with aggregation and insulation of the PDI core. By combining these fluorophores in a polymer film, we demonstrate highly emissive samples (85% ϕPL) at high concentration (140 mM or 20% w/w). Experimental and theoretical studies provide insight into why such a combination is necessary to achieve high ϕPL. While insulated fluorophores maintain respectable ϕPL at high concentration, an improved ϕPL can be achieved in the presence of appropriately oriented fluorophore aggregates as emissive traps. The theoretical calculations show that the relative orientation of aggregated monomers can result in energetic separation of localized states from the charge-transfer and bi-excitonic states thereby enabling high ϕPL.
-
ItemPhotophysics and spectroscopy of 1,2-Benzazulene(Elsevier, 2021-12)The electronic spectroscopy and photophysics of 1,2-benzazulene (BzAz) have been examined in solution and in thin solid films, with the objective of comparing its intramolecular and intermolecular excited state decay processes with those of azulene. Unlike azulene, the S2 – S0 absorption and fluorescence spectra exhibit a clear mirror image relationship dominated by a single strong Franck-Condon active progression. Picosecond transient absorption spectra and non-linear S2 fluorescence upconversion experiments reveal lifetimes that follow a well-established energy gap law correlation, indicative of a dominant S2 – S1 decay route. Mechanistic interpretations, including the possibility of S2 singlet fission in aggregates, are discussed.
-
ItemMedium effects on the fluorescence of Imide-substituted naphthalene diimides(Elsevier, 2023-03-01)Naphthalene diimides (NDIs) are a common class of chromophores used in photon harvesting applications due to their functional malleability through substitution of the NDI core. However, some derivatives with substitution at the imide position of the NDI core only become emissive in electron-rich aromatic solvents. This study examines this phenomenon from both an experimental and theoretical perspective, in order to understand how NDIs interact with each other and the surrounding medium upon photoexcitation. We report the photophysical properties of cyclohexyl and several aromatic imide-substituted NDI derivatives, and show that fluorescence properties are strongly influenced by solvation in more electron-rich aromatic solvents (e.g. toluene, xylene, mesitylene). Theoretical modeling supports strong interactions, including ground state charge-transfer complexation, with aromatic solvents. In solid poly(methyl methacrylate) (PMMA) and poly(styrene) (PS) film media, both aggregation and complexation are shown to contribute to absorption and emission properties. The results also demonstrate that aromatic imide substituents not only act to provide steric bulk to the NDI chromophore but participate in interactions with the surrounding medium that affect the overall photophysical properties.
-
ItemLimitations of conjugated polymers as emitters in triplet-triplet annihilation upconversion(ROYAL SOC CHEMISTRY, 2021-11-29)Triplet–triplet annihilation upconversion performances for poly(phenylene-vinylene) emitters were investigated through a series of copolymers with bulky sidechains.
-
ItemRevealing the influence of steric bulk on the triplet-triplet annihilation upconversion performance of conjugated polymers(NATURE PORTFOLIO, 2021-10-01)A series of poly(phenylene-vinylene)-based copolymers are synthesized using the Gilch method incorporating monomers with sterically bulky sidechains. The photochemical upconversion performance of these polymers as emitters are investigated using a palladium tetraphenyltetrabenzoporphyrin triplet sensitizer and MEH-PPV as reference. Increased incorporation of sterically bulky monomers leads to a reduction in the upconversion efficiency despite improved photoluminescence quantum yield. A phosphorescence quenching study indicates issues with the energy transfer process between the triplet sensitizer and the copolymers. The best performance with 0.18% upconversion quantum yield is obtained for the copolymer containing 10% monomer with bulky sidechains.
-
ItemThe role of conformational heterogeneity in the excited state dynamics of linked diketopyrrolopyrrole dimers†(ROYAL SOC CHEMISTRY, 2021-04-21)Diketopyrrolopyrrole (DPP) derivatives have been proposed for both singlet fission and energy upconversion as they meet the energetic requirements and exhibit superior photostability compared to many other chromophores. In this study, both time-resolved electronic and IR spectroscopy have been applied to investigate excited state relaxation processes competing with fission in dimers of DPP derivatives with varying linker structures. A charge-separated (CS) state is shown to be an important intermediate with dynamics that are both solvent and linker dependent. The CS state is found for a subset of the total population of excited molecules and it is proposed that CS state formation requires suitably aligned dimers within a broader distribution of conformations available in solution. No long-lived triplet signatures indicative of singlet fission were detected, with the CS state likely acting as an alternative relaxation pathway for the excitation energy. This study provides insight into the role of molecular conformation in determining excited state relaxation pathways in DPP dimer systems.
-
ItemConcentrating Aggregation-Induced Fluorescence in Planar Waveguides: A Proof-of-Principle(NATURE PORTFOLIO, 2014-04-10)The photophysical properties of fluorescent dyes are key determinants in the performance of luminescent solar concentrators (LSCs). First-generation dyes--coumarin, perylenes, and rhodamines--used in LSCs suffer from both concentration quenching in the solid-state and small Stokes shifts which limit the current LSC efficiencies to below theoretical limits. Here we show that fluorophores that exhibit aggregation-induced emission (AIE) are promising materials for LSC applications. Experiments and Monte Carlo simulations show that the optical quantum efficiencies of LSCs with AIE fluorophores are at least comparable to those of LSCs with first-generation dyes as the active materials even without the use of any optical accessories to enhance the trapping efficiency of the LSCs. Our results demonstrate that AIE fluorophores can potentially solve some key limiting properties of first-generation LSC dyes.
-
ItemA Transparent Planar Concentrator Using Aggregates of gem-Pyrene Ethenes(WILEY-V C H VERLAG GMBH, 2015-10-07)The luminescence properties of pyrene ethenes, both as monomer and aggregate species, are found to depend on the regioisomer structure. Systematic shifts in absorption, emission, and excitation spectra of the gem‐pyrene ethenes, both in solution and in rigid polymer hosts, are consistent with weakly interacting H‐aggregate formation. This aggregation leads to excimer‐like emission with Stokes shifts greater than 1 eV. Planar concentrators fabricated from gem‐pyrene diphenylethenes show comparable performance to previously reported inorganic phosphors. The UV absorption and emission properties of the planar concentrator devices exhibit potential for transparent solar concentrators or visible–blind photodetector applications. This is the first demonstration of exploiting the unusual photophysics of molecular aggregates in planar concentrators.