Civil Engineering - Theses
Permanent URI for this collection
Search Results
1 - 10 of 29
-
ItemEvaluating and reducing exposure to indoor pollutants from volatile organic compounds( 2019)Indoor air pollution now ranks as a top environmental health risk globally. Poor indoor air quality can detrimentally affect human health and the economy. Volatile organic compounds (VOCs) are pervasive indoor air pollutants. The major objectives of this research are to evaluate what is known about indoor VOCs, to understand what the typical VOCs people are exposed to within indoor environments, and to assess ways to reduce exposures and effects of indoor VOCs. First, this research systematically evaluates 25 years (1991–2016) of investigations of VOCs within indoor environments in Australia. Among 31 papers evaluated, the most frequently studied environment was domestic housing (61%), and the most frequently quantified compound was formaldehyde (81%). Active sampling techniques were used in 82% of studies of benzene, toluene, ethylbenzene, and xylene (BTEX), and in 38% of studies of formaldehyde and other carbonyls. New homes had the highest VOC levels among all studies of domestic housing. For nearly all pollutants, indoor levels were several times higher than outdoor levels. Among the most prevalent compounds indoors were terpenes, such as d-limonene and α-pinene. All studies were conducted at a regional or local level, and no study reported statistically representative indoor VOC data for the Australian population. The evaluation revealed a diversity of sampling approaches and techniques, pointing to the importance of a standard approach for collecting and reporting data. Second, this research investigates volatile organic compounds (VOCs) at a large Australian university, within locations of campus services, restrooms, renovated offices, a green building, meeting areas, and classrooms. Analysis of 41 VOCs across 20 locations revealed indoor concentrations higher than outdoor concentrations for 97% of all VOC measurements (493 unique comparisons). Hazardous air pollutants (formaldehyde, benzene, toluene, and xylenes) were up to an order of magnitude higher indoors than outdoors, and at the highest combined geometric mean concentrations in classrooms (51.6 µg/m3), renovated offices (42.8 µg/m3), and a green building (23.0 µg/m3). Further, d-limonene, ethanol, hexaldehyde, β-pinene, and isobutane were up to two orders of magnitude higher indoors than outdoors. The most prevalent VOCs (e.g., ethanol, d-limonene, and formaldehyde) have links with building materials, furnishings, and fragranced consumer products such as air fresheners and cleaning supplies. Highest indoor to outdoor concentration (I/O) ratios of formaldehyde (27), toluene (9), p-xylene (12), and m-xylene (11) were in a green building; highest of benzene (6) in renovated offices; and highest of o-xylene (9) in meeting areas. Although indoor concentrations of hazardous air pollutants (i.e., benzene, formaldehyde, toluene, xylenes) were higher indoors than outdoors, the indoor concentrations are nonetheless lower than applicable World Health Organisation guidelines. Results from this study are consistent with findings from similar international studies and suggest that university indoor environments may be important sources of pollutants. Third, this research investigates volatile emissions from six residential dryer vents, with a focus on d-limonene. It analyses and compares concentrations of d-limonene during use of fragranced and fragrance-free laundry products, as well as changes in switching from fragranced to fragrance-free products. In households using fragranced laundry detergent, the highest concentration of d-limonene from a dryer vent was 118 µg/m3 (mean 33.34 µg/m3). By contrast, in households using only fragrance-free detergent, the highest concentration of d-limonene from a dryer vent was 0.26 µg/m3 (mean 0.25 µg/m3). After households using fragranced detergent switched to using fragrance-free detergent, the concentrations of d-limonene in dryer vent emissions were reduced by up to 99.7% (mean 79.1%). This simple strategy of switching to fragrance-free products significantly and almost completely eliminated d-limonene emissions. Results from this study demonstrate that changing from fragranced to fragrance-free products can be a straightforward and effective approach to reduce ambient air pollution and potential health risks. In summary, this research identified primary indoor air pollutants and understudied locations. It evaluated indoor air quality at a university and provided evidence that green and renovated buildings may not necessarily guarantee improvements for indoor air quality. It assessed an approach to reduce VOC emissions in residences and demonstrated that significant reductions were possible. In conclusion, this research provides novel scientific findings that can help improve indoor air quality both in Australia and internationally.
-
ItemImpact-resistance of Reinforced Concrete Structures( 2019)Reinforced concrete (RC) protective barriers such as rockfall barriers and vehicular barriers need to be designed to resist impact actions. However, there are uncertainties over the required stability of the barrier to withstand the impact forces predicted for the projected impact scenarios. A critical review of the literature covers a range of methods for estimating the impact action imposed by a hard impactor on RC members. Those methods providing estimates of the peak impact force occurring in a transient manner at the point of contact between the boulder and the surface of the RC member, or cushion material placed in front of the member, are classified as force-based (FB) methods, whereas methods providing estimates of the displacement of the target, or a quasi-static force corresponding to the estimated displacement demand, are displacement-based (DB) methods. The FB methods have gained useful insights into protection of the barrier from localised damage. However, the destabilising effects and other global effects (of bending and shear) of the impact action are preferably estimated by DB methods. Fundamental distinctions between the two classes of methods, and different types of forces generated by an impact have been explained in the literature review. Overly conservative estimates of the destabilising action of an impact can be resulted if the peak impact force is applied in a static manner to the model of the barrier (the target). The DB model that has been developed at the University of Melbourne is less conservative than existing codified models and has been verified by comparison with results from laboratory experimentation. The model has also been shown to give estimates of the bending moment of a simply supported beam that are consistent with recommendations by the CEB (Euro-International Concrete Committee) model. The primary objective of this project is to develop simple analytical models for assessing the global response behaviours of a RC rigid barrier when subjected to hard impact, including overturning, sliding and bending. These models were developed based on the same underlying DB methodology, but take different forms depending on the type of response. In a conventional FB design procedure wherein the impact action is represented by an equivalent static force, the demand on the stability of the barrier increases with its height because of the higher overturning moment that has to be resisted. There are significant costs implications associated with this design methodology and more so in cases where a deep (piled) foundation is required to resist the overturning moment transmitted from a tall barrier. An alternative design approach based on equal energy and momentum principles as proposed in this thesis predicts a higher factor of safety against overturning with a taller, free-standing, barrier when the base dimensions are kept the same. The free-standing approach to design saves costs as the need of a deep foundation is eliminated and stresses within the barrier is always lower when the base is free to rotate. This alternative design approach has been verified by results from systematic physical and simulated impact experimentation. When space is limited, sliding action of the barriers become a key design consideration. By employing the DB methodology, an analytical model in the form of a closed-form expression has been developed for estimating the amount of sliding displacement of a barrier when struck by an impactor at a lower height. Similar to the overturning action, ratio of barrier mass to impactor mass has been found to have significant effects on the overall stability of the barrier. The proposed DB model for flexural design of RC wall is based on designing the stem wall with sufficient longitudinal reinforcement (resulting in sufficient stiffness of the wall) in order that neither the steel nor the concrete would surpass the limit state of yield thereby ensuring linear elastic behaviour. This conservative design criterion serves to prevent the stem wall from accumulating flexural deformation following multiple impacts (e.g. by fallen boulders). It has been confirmed by numerical simulations using program LS-DYNA that a stem wall designed based on the proposed model was indeed responding within the limit of yield which is consistent with the design criterion. The LS-DYNA simulation of the example wall did not show any formation of cracks of a size which was visible (i.e. 0.1 mm) nor any permanent deformation to the wall other than in the vicinity of the point of contact at the top which is a localised damage phenomenon. Furthermore, the accuracy of the proposed method in predicting deflection of the stem wall forming part of the flexural stiffness method has also been validated by comparison with results recorded from physical impact experimentation as reported in the literature. The database employed in the validation comprises results from physical and numerically simulated testings covering a total of 18 impact scenarios. In summary, there is sufficient evidence in support of the use of the proposed DB model in practice for designing the stem wall to perform satisfactorily in bending. Given the robustness of the proposed design methodology, it was employed to design a RC wall specimen for a large-scale impact experiment. The experiment was fully instrumented to measure the bending response behaviour of the wall specimen and the corresponding material strains. As expected, the specimen did not exceed its yield limit within the scope of the experiment. The estimated results have been shown to be in good agreement with the experimental results. Importantly, it was found from both the experimental and predicted results that the inertial resistance developed in the target stem wall played a significant role in terms of the bending response behaviour of the wall. Such an effect is normally neglected in a conventional FB design procedure. The ultimate goal of this research project is that the analytical models presented will be useful for designers of impact-resistant structures aiming for undertaking a more rational and optimised design. The practical applications of the proposed models in designing a rigid rockfall barrier are illustrated at the end of this thesis. Quasi-static lateral load from debris flow has been incorporated to co-exist with the impact action of the boulder in the calculation procedure. Design checks to ensure stability from overturning and satisfactory performance of the barrier in sliding and bending of the stem wall are also presented at every stage of debris surge. The design example addresses all the requirements in engineering practices to well illustrate the application of the new design methodology.
-
ItemFurther understanding ground source heat pump system design using finite element methods and machine learning techniques( 2018)Ground-source heat pump (GSHP) systems can efficiently provide renewable energy for space heating and cooling. Even though these systems have shown great potential, contributing towards the continuously increasing energy demand and reducing greenhouse gas (GHG) emissions, our understanding of how they can be best utilised and designed can still be improved. This research adopts detailed numerical modelling and statistical approaches to provide further insights on these systems and contribute towards their worldwide adoption, focusing on three main areas. Firstly, due to the nature of their installation, there can exist disparities between the designed and installed systems. One such design-installation disparity, variable geothermal pipe separation, is addressed, aiming to reduce the gap between theory and practice. Secondly, due to the relatively recent emergence of energy geo-structures, such as energy piles or retaining walls, there currently exists little information on their utilisation/design. Therefore, an in-depth numerical analysis on energy geo-structure thermal performance is provided, focusing on the less well-researched energy retaining walls and providing suggestions on important factors such as the thermal demand, structure geometry and pipe configuration. Finally, two statistical approaches are presented that complement numerical modelling (often adopted for energy geo-structure analysis) and significantly reduce the computational time/resources associated, making numerical analysis and design of GSHP systems more accessible to engineering practice.
-
ItemDesign optimisation for off-site manufacture and assembly of MEP systems( 2018)Modularisation and Standardisation for prefabrication of mechanical, electrical and plumbing (MEP) systems have become more prevalent during the last decade with the growth of the prefabricated construction industry. Speedy construction, minimum onsite labour, improved quality and waste reduction are the key benefits that make prefabrication superior to conventional construction. However, in MEP, modularisation and standardisation are currently applied only to smaller systems, where integrated packaged units are used in heating, ventilation and air conditioning (HVAC) and other building services installations. Modular prefabrication is rarely practiced when services are located within the building due to limitations during installation and difficulty in coordination. The term ‘optimum modularity’ is not accurately used in the field, and identification of modules is solely based on individual judgement than a structured method. The absence of a structured method for modularisation in MEP has made the identification of modules for prefabrication a time-consuming process, that often fails to achieve the optimum module division with minimum installation cost. In most cases, this has resulted in modular prefabrication of MEP being the same cost as conventional construction or even higher. This is one of the main reasons that impedes the use of modular prefabrication in the MEP industry. Therefore, this research has formulated an algorithm for optimum module identification in MEP systems, considering the installation cost and the functional requirements of the system. The structured modularisation process developed in the thesis, identifies the optimum module configuration to achieve minimum installation cost, while satisfying the installation and operation constraints of MEP systems. This method assists engineers and researchers to evaluate the benefits of a modular configuration compared to conventional site build strategy, prior to implementing prefabrication in MEP projects. In order to achieve these objectives, three case study project sites were visited during the construction period to identify the constraints in MEP construction and aspects to consider in the modularisation process. Chilled water central plants are chosen for the development of the modularisation algorithm, due to its complex installation process and popularity in the industry. This practical insight into the development of the method ensures that the configurations generated using the algorithm are practically constructable onsite. Structured modularisation methods practiced in various manufacturing industries such as Aerospace, Automotive, Shipbuilding and Consumer electronics were studied to identify their applicability to the construction industry. The developed structured modularisation method presented in this thesis is the only study available to date in literature, that takes an algorithmic approach to modularisation in the construction industry. An automated process of module identification, using a combination of fuzzy logic, Dependency Structure Matrix (DSM) and Hierarchical Clustering and Partitioning Algorithm (HCPA) have minimum human intervention, where input data is extracted from the Building Information Model (BIM). This leads to significant time and cost savings during the design and construction stages of MEP systems. Although the development of the algorithm was based around chilled water plant construction, the methods proposed in this thesis can be used for modularisation of other MEP central plants, such as generator, transformer and pumps, with further research on limitations and assemblies associated with a particular system. In addition to a structured method for modularisation, design engineers and researches would also require a model to evaluate the benefits of modular over conventional construction. In this regard, the output of the developed algorithm estimates the installation cost of the optimum configuration and compare the cost benefits with the conventional case, prior to implementing modular construction in MEP projects. This thesis provides a comparison of the modular approach to conventional construction, to identify a hybrid strategy to MEP plant construction. Furthermore, recommendations are provided to implement this research in other disciplines in the modular construction industry.
-
ItemCollective movement of merging pedestrian crowds( 2018)Modelling pedestrian crowd movement and behaviour has emerged in the recent years in the literature as a new research topic. This topic has become important to an increasing extent due to the growth of populations of urban areas and mass events as well as an increase in the frequency of crowd-related incidents in venues that host a large number of people. Emergency incidents are considered as infrequent occurrences with safety-related ramifications and probable high effect. Although some attempts of modelling and simulating pedestrian movement have been around for decades, this field of research has recently received an apparent boost in attention in a variety of disciplines, notably in transport. The research on this subject eventually intends to develop forecasts tools that could assist in planning and optimisation for evacuation situations by providing measures including total evacuation times for each given circumstance. This would facilitate planners and authorities with the useful information required for evaluating the efficiency of their evacuation strategies in terms of time takes to vacate venues, placing potentially problematic locations and identifying weaknesses in their venues and recommend measures that can expedite the discharge of individuals should normal or emergency evacuation arise. Applications of these prediction tools could range vastly from merely guiding occupants as to in what way they should behave and manage themselves in case of occurrence of an incident, to assessing the safe density rate of venues especially in large special events and mass gatherings, too complicated optimising the design of the environments in ways that best increase the efficiency with which individuals move. The interdisciplinary problem has drawn the attention of researchers in numerous fields such as applied physics, fire safety, mathematics, ergonomics and transport engineering. The most critical element of this practice is potentially the accurateness of modelling that is inextricably linked with the behaviour of humans and extent to which their behaviour can be replicated by the proposed models. Considering implications of evacuation prediction tools and models in terms of safety, it is of major importance to reduce the possibility of imprecise estimates that could possibly culminate in inaccurate designs or misguided management policies. In order to address the challenges involved in reproducing pedestrian crowd motion, broad research has been undertaken. As stated by literature, however, most of studies has centred on understanding a class of models which we refer to as “walking-behaviour” or “next-step” models. In contrast, there has been very little knowledge as to the understanding of a higher scale of pedestrian decision making which we refer to as “route/exit” choice. Implementation of some plausible criteria which can reproduce peoples’ exit decision in an egress situation while taking into account the dynamic changes of the exit characteristics would be part and parcel of any simulated evacuation from a geometrically complex facility. I state that the experimental information in this field of research has dropped behind the mathematical progressions and model specifications. Therefore, more extensive empirical research and experimental studies in this topic are required in order to bridge this existing gap. Also, by exploring the current empirical literature, it can be concluded that the research in this field has been distributed in a comparatively unbalanced way in terms of addressing a variety of factors influencing on humans’ movements pattern. More empirical insights have been obtained related to the walking behaviour of individuals, particularly in simple experimental layouts. However, the impact of space particularly complex architectural settings on individuals’ interactions are relatively less explored. investigating this effect experimentally pose additional levels of difficulty for data collection, data extraction and drawing behavioural insights. Whereas, it is evident that acquiring a precise and comprehensive understanding of this impact and developing behavioural models that are capable of capturing this effect is of paramount importance. This research is proposed to address some of the knowledge gaps we identified with respect to the impact of space on movement dynamics of human crowds under the various level of stress. To our knowledge, the literature lacks an extensive understanding as well as robust models of the effect of geometrical features of movement area on movement pattern of individuals for egress situation. Therefore, this study primarily aims to provide an understanding of this effect particularly presence of merging corridors on egress behaviour through the provision of data obtained from a vast number of experimentations which is called for in the literature. Novel conditions and experimental layouts are to be considered as well as an advanced micro-level/ macro-level analysis are to be performed to elicit individuals’ behaviour. In addition, we analyse and present the observed interactions between occupants and their surrounding environment in a way that could be utilised for various mathematical models and simulation tools. I investigate the problem utilising two sources of experimental observations: data gained from non-human experimentation and data extracted from field-type experiments in controlled laboratory conditions with human subjects. Animal experiments data was collected by utilising panicked ants as experimental subject evacuating from various conflicting layouts. The impact of physical factors of movement environments on dynamics of the crowd was imitated in real actions where occupants were required to interact with their surrounding areas while evacuating under various levels of emergency. Their movement pattern was extracted at the level of individuals from raw footage of pedestrians. Data obtained from both sets of experiments were analysed undertaking macroscopic and microscopic measurements. While the above-mentioned problem is the primary purpose of this research, as a second question, this proposed study also intends to investigate the effect of the level of emergency on evacuees’ discharge behaviour in terms of observing “faster is slower “phenomenon. There are some merely simulated approaches as well as experimentation with non-human subjects proposed in the literature suggesting “faster is slower “ phenomenon under an emergency condition, validation of which have been primarily impeded by the scarcity of reliable explanatory data. Furthermore, to our knowledge, the impact of architectural design of egress area particularly presence of merging corridors on evacuation behaviour of the crowd has been barely examined in connection with the level of vigour to evacuate. Although the scarcity of pertinent data will still hinder us to address this problem under the extreme level of emergency situations, this study proposes some experiments under which the effect of extreme conditions is to be explored to bring to light any potential difference between the impact of space on evacuees’ behaviour under normal and emergency conditions The connection recognized between the findings obtained from experimentation with non-human organisms and humans also provided motivating insights into how the influence of the presence of conflicting layouts particularly merging corridors on the collective movement of non-human organisms is similar to that effect on the motion of human subjects. This connection led to findings that not only did offer insight into the possible relevance of collective behaviour of non-human subjects to what human occupants do in escape scenarios.
-
ItemBuildings featuring irregularities in the gravity load carrying frames in low-to-moderate seismicity regions( 2018)The need of building to have column-free space at certain storeys due to architectural and aesthetical reasons, or a change in the functionality of adjacent storeys and building facility requirements, explain why many buildings feature irregularities in their gravity load carrying frames. However, discontinuities in the load-bearing system may result in unfavourable failure mechanisms under severe earthquake excitations. These buildings commonly exist in low to moderate seismic regions, like Australia; given that strict regulations do not exist with respect to earthquake resistant design of buildings. Furthermore, in these regions buildings typically have non-ductile detailing and are therefore prone to brittle and sudden failures. There is a growing need to assess the performance of vulnerable buildings in low to moderate seismic regions as it has been acknowledged that these regions are exposed to the risk of rare occurrence of devastating and damaging earthquakes. This research aims at investigating the seismic performance of a class of vertically irregular buildings in regions of low to moderate seismicity in order to provide a broad and comprehensive understanding of their response behaviour. Owing to the importance of vulnerability assessment of buildings featuring the use of transfer beams in the gravity load carrying frames (discontinuity or off-set in the load path), linear and nonlinear response behaviour of this class of buildings have been investigated thoroughly. Although “gravity frames” are assumed only to carry vertical loads, the effects of their lateral strength and stiffness need be taken into consideration in the seismic analysis. Results of studies revealed that the elastic response behaviour of vertically irregular buildings is consistent with regular buildings in terms of stiffness, modal periods, modal shapes, and lateral displacement and shear force profiles. Hence, stiffness irregularity (as a consequence of discontinuity) may not develop in the elastic range. An analysis method is known as the Generalised Force Method (GFM) which has been developed to remedy the shortcomings of the Equivalent Static Analysis method is introduced. This method is not subject to height range restrictions and is applicable to buildings that may have eccentricity, and/or transfer beam irregularity. A technique for the modelling of limited ductile beam/column components based on the concentrated plasticity modelling method has been proposed and used to develop the nonlinear models. Damage mechanism, failure patterns and weak regions of these buildings have been investigated using nonlinear analysis methods, and finally, response modification factors have been calculated for these buildings. It has been shown that a weak storey in the cases where the contributions from moment-resisting frames are high can be developed as a consequence of shear failure in the transfer beam. The behaviour of limited ductile shear walls or non-ductile columns governs the seismic behaviour of these buildings. Failure of walls due to the lack of boundary elements may occur as a result of poor detailing. However, shear failure in the transfer beams may also occur prior to the failure of walls in some cases. Hence, to avoid undesirable seismic performance behaviour such as weak storey collapse mechanism (due to the shear failure of transfer beams), more complicated methods of analysis might not necessarily result in a more desirable outcome. Ductility factors for the buildings investigated have been found to be less than 1.5. Hence, current detailing practice may not ensure a ductility value of 2.0 in compliance with AS117.4:2007, even for the regular buildings. The ductility factor for certain irregular buildings which typically has higher contributions from moment-resisting frames to the lateral stiffness have been found to be close to 1.0; which reveals the concentration of plasticity in the critical elements while elastic response behaviour is experienced with the other elements. Hence, the structure is almost entirely elastic at the onset of developing a mechanism. Guidelines and recommendations for the design of a new building in the form of designation of applicable analysis methods for these buildings and response modification factors are provided in the thesis. A straightforward method for the seismic assessment of limited ductile shear wall dominant buildings has been recommended. The method uses a rational approach to predict the nonlinear response behaviour of a given building by modifying the stiffness of individual members of an elastic model for the building structure. Moreover, a probabilistic rapid assessment tool for generating fragility curves is proposed for these buildings. This tool can be used for obtaining information for the risk assessment studies, by providing a simple and rapid method to assist global decision makers.
-
ItemModelling damage to glazing and aluminium facades by flying objects( 2018)Impact by flying debris in windstorms conditions has been a major contributor to damage to aluminium, glass and other types of building facades. However, no codified design guidelines are currently available to quantify the required impact resistance of an aluminium or glazing panel for a given impact action. This research presents the development of an analytical model for assessing impact induced damage (permanent deformation or perforation) to an aluminium panel for given mass of the projectile (debris) object, velocity of impact, and importantly, parameters characterising the stiffness properties of the windborne impactor object. Stochastic methodology is developed to simulate the risk of fracture of the glass panel when subject to the transient action of point contact that can be generated by the impact of hailstones or windborne solid debris particles. The introduced simulation methodologies are able to predict the impact resistance capacity of glazing and aluminium panels without conducting impact experiments. The aim of introducing the proposed simulation model is bringing about significant savings by waiving away the need of conducting repetitive physical experimentation on panels of different dimensions, and at different rates of loading.
-
ItemInvestigating the benefits of considering the payload spectra of freight vehicles on pavement costs based on weigh-in-motion data( 2017)Truck traffic is a crucial factor that contributes to pavement damage. The urbanization and globalization promote the higher level of daily consumption for goods, thus increasing the derived demand for freight transport. In some countries, such as Australia, there is a trend towards using larger vehicles, which raised the road authorities’ concern about their effect on pavement because of the lack of pavement maintenance and rehabilitation funding. Therefore, it is important to have a comprehensive understanding of Australian road freight market and optimize the allocation of freight for different types of trucks to reduce the total pavement damage. Weigh-in-motion (WIM) system, which measures and records detailed vehicle information operating on road, was the data source for this study. The data was provided by the State Road Authority of Victoria (VicRoads). This thesis gave out a prototype filtering strategy for WIM database to improve the accuracy. Also, it investigated the efficiency of freight transport by comparing the effect of six-axle semi-trailers and nine-axle B-doubles with regards to pavement performance when carrying various payloads. Mathematical models were developed to help decision makers consider how to distribute the road freight task more efficiently to minimize the pavement damage induced by freight vehicles. A simplified pavement performance prediction model was utilized as a basis to determine the future pavement maintenance & rehabilitation schedules and thus, help compare the long-term pavement treatment costs for different traffic loading scenarios. The outcomes of the research showed that it would have considerable advantages in reducing the overall pavement damage by decreasing the percentage of empty trucks, changing the proportion of freight carried by B-doubles as well as optimizing the payload distributions. In addition, there would be significant benefits in the pavement maintenance & rehabilitation costs over the pavement service life by improving the allocation of freight for trucks.
-
ItemOptimisation of disaster waste management systems( 2018)The four major stages of disaster management are mitigation, preparation, response and recovery. Waste management is one of the core activities in the recovery stage and focuses on collecting, reducing or recycling, and final disposal of the remaining waste. The volume of waste generated from a single event can reach 5 to 15 times the annual waste normally produced by affected communities. The clearance, removal and disposal of such large amounts of debris are costly and time-consuming operations. However, there has been little literature dedicated to the improvement of disaster waste management (DWM) procedures compared to other operations in disaster management. The main objective of this thesis is to develop an integrated framework to improve DWM. Two sets of models that focus on two topics have been developed, namely reliability analysis of a DWM system and the two-echelon DWM system optimisation. The framework is tested for its validity and capacity for an improved understanding of the challenges in disaster waste clean-up. In the first part of the thesis, a mathematical model is built to implement the First Order Reliability Method (FORM) to investigate reliability based on variables have an impact on the system, which were identified and summarised in the literature review. An optimisation model is developed that consider the total cost and clean-up period constraints to improve reliability. To solve the optimisation model, which is non-linear, a genetic algorithm is developed. The methodology is validated using a case study in Victoria, Australia. Sensitivity analysis was conducted to identify the impact of total cost and total clean-up time on the reliability of the system. In addition, a methodology has been developed for estimating waste accumulation caused by disasters and the reliability of DWM system. These consider the uncertainty of return period and scale of disasters. To estimate the reliability of the system, FORM is used to evaluate the system's reliability. Two case studies are presented to illustrate how the methods can be applied in the real world. The reliability index curve of the system developed from sensitivity analysis can provide information for decision-makers regarding disaster waste clean-up arrangements. The approach developed can be used to analyse the effects of different parameters involved in the system after disasters. In the second part of the thesis, initially, a methodology is presented to select candidate Temporary Disaster Waste Management Sites (TDWMS) that can be regarded as a land suitability analysis problem. ArcGIS was used to conduct the analysis, which includes four main steps: identifying and determining criteria, weighting criteria, mapping standardised layers, and overlapping standardised layers. The Modelbuilder function was applied to build the analysis model. Boolean logic was used to standardise the criteria map layers. A total of 45 candidate sites were selected within the case study area in Murrindindi, Victoria, Australia. According to the analysis, the distance from groundwater, drinking water resources, and public water supplies are the most sensitive criteria. Using the location of TDWMS candidates, an optimisation model was developed for small-scale and large-scale disasters. In small-scale disasters demand from each customer node is smaller than the capacity of collection vehicles. Therefore, the problem can be seen as a Multi-Period Two-echelon Location Routing Problem (MP-2ELRP) in which the main decisions are the location of the TDWMS and the routing of vehicles in both echelons. In this thesis, both a Mixed Integer Programming (MIP) and a genetic algorithm were developed to model and solve the problem, respectively. A methodology for generating data for a case study and some alternative testing instances, which are used to evaluate the efficiency of both the model and the heuristic were developed. Computational tests indicate the robust performance of the genetic algorithm and allow for a thorough analysis of the effect of using TDWMS in terms of both the cost and the duration of the clean-up process. In large-scale disasters, the arrangement to demolish damaged buildings as well as selecting the location of TDWMS, in which the demand from each customer node is larger than the capacity of collection vehicles is considered. A multi-objective MIP model is developed that consider the limitations on the working time of vehicles, vehicle capacities and the capacity of TDWMS. The goal of the model is to minimise the total cost and total time spent in the clean-up process. Three different approaches are developed to solve the model, which are tested with artificial instances containing different numbers of customer nodes. A case study in Kinglake, Victoria, Australia, which was badly affected by the 2009 Black Saturday bush-fires, is conducted to validate the model and analyse the significance of building demolition sequences.
-
ItemFlood damage assessment in urban areas( 2018)Natural disaster prevention activities are attracting greater priority since prevention is more cost-effective and less uncertain than response, and aligned with the vision and mission of sustainable development. Increasing the resilience of communities and businesses is dependent on the extension of structural and non-structural risk mitigation activities. Hence, the nation-wide frameworks of natural disaster risk management are promoting a global movement from reactive activities (response and recovery) to proactive actions (prevention and mitigation). In Australia, flood risk management is of high priority since flood is a frequent natural hazard with significant financial consequences. Flood risk assessment and flood damage estimation are the primary steps in the flood risk management process because they are essential for the identification and prioritisation of top priority areas, cost-benefit analysis, checking the feasibility of risk mitigation options, selecting best practices in risk reduction and land use planning. This research aims to develop a validated flood damage assessment framework for the geographical area of Australia using historical data collected in several disaster events to inform disaster management policy in support of the development of risk reduction measures. In Australia, due to a lack of empirical data, most damage models are not calibrated with real damage data, and few studies have been conducted on the validation of results. In addition, most approaches are absolute, which is quite rigid and does not easily transfer across time and space. All approaches are of the traditional type, which relies on a deterministic relationship between type or use of the properties at risk and the depth of water. Thus, the interaction of most damage-influencing parameters and the uncertainty of data are neglected. This study has attempted to address these issues and the knowledge gaps. Firstly, a comprehensive empirical data set including information on damage extent, flood impact variables and resistance factors was collected, and data mining, data preparation and data transformation were conducted. Since the function approach is a common and internationally accepted methodology for estimating the value of flood losses, some new relative multi-parameter flood damage assessment functions were derived, calibrated and validated for the most common residential and commercial building types in Australia. The functions were developed using the bootstrapping approach and considered the inherent uncertainty in the data sample. The performance of the new flood loss functions, in comparison to the empirical data, was contrasted with that of well-known flood damage assessment models from overseas and Australia. The new model was then transferred to a study area in Italy to check the ease of using local empirical data, evaluating the accuracy of the outcome, and assessing the ability to change parameters based on building practices across the world. Flood damage assessment is a complicated process and can be dependent on a variety of parameters which are not considered in stage-damage functions. Accordingly, a tree-based model was developed for exploring the interaction, importance and influence of other damage-influencing parameters on the extent of losses. Finally, the candidate has explored the predictive performance of the new approaches (i.e. flood loss functions and tree-based flood loss models) in assessing the extent of physical damages after temporal and spatial transfer. The predictive power of these models was tested for precision, variation and reliability, and was also checked for some sub-classes of water depth and some groups of building type. The advantages of the newly derived stage-damage functions compared to the existing Australian models include: calibration with empirical data, greater accuracy in results, a better level of transferability in time and space, consideration of the epistemic uncertainty of data, transparency of the logic behind the model and the ability to change parameters based on building practices across the world. Furthermore, results of the tree-based analysis showed that while water depth is the most significant damage predictor in the area of study, floor space, private precautionary measures, building value and building quality also correlate with the extent of flood losses. Also, the tree-based models are shown to be more accurate than the stage-damage function. Thus, considering more parameters and taking advantage of tree-based models are recommended. Finally, it has been shown that considering more details of the damaging process can be useful for enhancing the level of transferability of damage models in time and/or space. Overall, this thesis presents a significant contribution to the flood damage assessment process by offering a calibrated and validated flood loss estimation framework. The results provide the input data for subsequent damage reduction, vulnerability mitigation and disaster risk reduction.