Electrical and Electronic Engineering - Research Publications

Permanent URI for this collection

http://hdl.handle.net/11343/362

Filters

Reset filters

Settings
Statistics
Citations
Author: Nirmalathas, Ampalavanapillai × End date: 2022 ×

Search Results

Now showing 1 - 10 of 76
  • Item
    No Preview Available
    Investigation on Orbital Angular Momentum Mode-Based Beam Shaping for Indoor Optical Wireless Communications
    Li, J ; Yang, Q ; Dai, X ; Lim, C ; Nirmalathas, A (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2022-12-15)
  • Item
    No Preview Available
    Comparison of Adaptive Equalization Methods for Improving Indoor Optical Wireless Communications Employing Few-Mode Based Uniform Beam Shaping
    Li, J ; Lim, C ; Nirmalathas, A (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2022-06-15)
  • Item
    Thumbnail Image
    Demonstration of Spatial Modulation Using a Novel Active Transmitter Detection Scheme with Signal Space Diversity in Optical Wireless Communications
    Song, T ; Nirmalathas, A ; Lim, C (MDPI, 2022-11)
    Line-of-sight (LOS) indoor optical wireless communications (OWC) enable a high data rate transmission while potentially suffering from optical channel obstructions. Additional LOS links using diversity techniques can tackle the received signal performance degradation, where channel gains often differ in multiple LOS channels. In this paper, a novel active transmitter detection scheme in spatial modulation (SM) is proposed to be incorporated with signal space diversity (SSD) technique to enable an increased OWC system throughput with an improved bit-error-rate (BER). This transmitter detection scheme is composed of a signal pre-distortion technique at the transmitter and a power-based statistical detection method at the receiver, which can address the problem of power-based transmitter detection in SM using carrierless amplitude and phase modulation waveforms with numerous signal levels. Experimental results show that, with the proposed transmitter detection scheme, SSD can be effectively provided with ~0.61 dB signal-to-noise-ratio (SNR) improvement. Additionally, an improved data rate ~7.5 Gbit/s is expected due to effective transmitter detection in SM. The SSD performances at different constellation rotation angles and under different channel gain distributions are also investigated, respectively. The proposed scheme provides a practical solution to implement power-based SM and thus aids the SSD realization for improving system performance.
  • Item
    No Preview Available
    Investigation on repetition-coding and space-time-block-coding for indoor optical wireless communications employing beam shaping based on orbital angular momentum modes
    Li, J ; Yang, Q ; Dai, X ; Lim, C ; Nirmalathas, A (Optica Publishing Group, 2022-06-06)
    In this paper, we propose a novel beam shaping technique based on orbital angular momentum (OAM) modes for indoor optical wireless communications (OWC). Furthermore, we investigate two spatial diversity techniques, namely repetition-coding (RC) and Alamouti-type orthogonal space-time-block-coding (STBC) for indoor OWC employing the new beam shaping technique. The performance of both diversity schemes is systematically analyzed and compared under different beam shaping techniques using different OAM modes with different power ratios of the modes. It is shown that both RC and STBC can improve the system performance and effective coverage and RC outperforms STBC in all the beam shaping techniques regardless of the power ratios of the different modes. In addition, to further understand the performance of RC and STBC schemes against the signal delays induced during OAM mode conversion, the system tolerance of the two schemes to the delay interval is investigated with different OAM mode-based beam shaping techniques. Numerical results show that higher resistance to the delay interval can be achieved in STBC scheme. The advantage is more obvious when employing OAM0 and OAM1 based beam shaping technique.
  • Item
    Thumbnail Image
    Few-Mode Based Beam Shaping for Multi-User Indoor Optical Wireless Communications With Time-Slot Coding
    Li, J ; Lim, C ; Nirmalathas, A (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2022-02)
  • Item
    Thumbnail Image
    IoT Device Integration and Payment via an Autonomic Blockchain-Based Service for IoT Device Sharing
    Dawod, A ; Georgakopoulos, D ; Jayaraman, PP ; Nirmalathas, A ; Parampalli, U (MDPI, 2022-02)
    The Internet of Things (IoT) incorporates billions of IoT devices (e.g., sensors, cameras, wearables, smart phones, as well as other internet-connected machines in homes, vehicles, and industrial plants), and the number of such connected IoT devices is currently growing rapidly. This paper proposes a novel Autonomic Global IoT Device Discovery and Integration Service (which we refer to as aGIDDI) that permits IoT applications to find IoT devices that are owned and managed by other parties in IoT (which we refer to as IoT device providers), integrate them, and pay for using their data observations. aGIDDI incorporates a suite of interacting sub-services supporting IoT device description, query, integration, payment (via a pay-as-you-go payment model), and access control that utilise a special-purpose blockchain to manage all information needed for IoT applications to find, pay and use the IoT devices they need. The paper describes aGIDDI's novel protocol that allows any IoT application to discover and automatically integrate and pay for IoT devices and their data that are provided by other parties. The paper also presents aGIDDI's architecture and proof-of-concept implementation, as well as an experimental evaluation of the performance and scalability of aGIDDI in variety of IoT device integration and payment scenarios.
  • Item
    Thumbnail Image
    Intelligent Radio Resource Allocation for Human-Robot Collaboration
    Feng, Y ; Ruan, L ; Nirmalathas, A ; Wong, E (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2022)
  • Item
    Thumbnail Image
    Dynamic scheduling algorithm for LTE uplink with smart-metering traffic
    Amarasekara, B ; Ranaweera, C ; Evans, R ; Nirmalathas, A (WILEY, 2017-10)
    Abstract Long‐term evolution (LTE) is a promising last mile access candidate technology for the smart‐metering communication architecture. However, when the mobile LTE network is used to support smart meters (SMs), the quality‐of‐service (QoS) requirements of the smart‐metering traffic as well as all the other typical mobile network traffic need to be ensured. This becomes problematic when the network users generate diverse traffic types that have different QoS requirements. Therefore, in this paper, we propose a dynamic bandwidth scheduling algorithm to ensure the required QoS of various traffic types arising from both SMs and mobile users. Our proposed dynamic bandwidth allocation algorithm integrates two schedulers that are designed for periodic and emergency SM traffic situations that have different SM traffic intensities and QoS requirements. Designing of two schedulers provides the advantages of leveraging the particular traffic characteristics of these two diverse operational situations and achieving the maximum use of resources to ensure QoS requirements. In addition, to alleviate potential problems created by simultaneous emergency SM traffic, we also propose a method that deploys a random delay for SM packet transmissions. We analyse the delay and packet drop ratio of diverse traffic types when both the LTE base station scheduler and the SMs deploy our proposed methods under either periodic or emergency SM traffic conditions in the smart grid. Our results show that our proposed mechanisms are capable of satisfying the QoS requirements of both mobile users and SMs under diverse traffic conditions.
  • Item
    No Preview Available
    integrated on a CMOS image sensor
    He, X ; Liu, Y ; Beckett, P ; Uddin, H ; Nirmalathas, A ; Unnithan, RR (OPTICAL SOC AMER, 2021-01-15)
    The CMY colour camera is different from the RGB counterpart where the subtractive colours cyan, magenta and yellow are used. The CMY camera performs better than an RGB camera in low light conditions. However, conventional CMY colour filter technology made of pigments and dyes are limited in performance for next generation image sensors with submicron pixel sizes. This is because the conventional CMY filters cannot be fabricated in nanoscale as they use their absorption properties to subtract colours. This paper presents a CMOS compatible nanoscale thick CMY colour mosaic made of Al-TiO2-Al nanorods forming a total number of 0.82 million colour filter pixels with each filter pixel size of 4.4 µm arranged in a CMYM pattern. The colour mosaic was then integrated on a MT9P031 image sensor to make a CMY camera and colour imaging is demonstrated using a 12 colour Macbeth chart. The developed technology will have applications in astronomy, low exposure time imaging in biology, and photography.
  • Item
    No Preview Available
    Secure multiple access for indoor optical wireless communications with time-slot coding and chaotic phase
    Liang, T ; Wang, K ; Lim, C ; Wong, E ; Song, T ; Nirmalathas, A (OPTICAL SOC AMER, 2017-09-04)
    In this paper, we report a novel mechanism to simultaneously provide secure connections for multiple users in indoor optical wireless communication systems by employing the time-slot coding scheme together with chaotic phase sequence. The chaotic phase sequence is generated according to the logistic map and applied to each symbol to secure the transmission. Proof-of-concept experiments are carried out for multiple system capacities based on both 4-QAM and 16-QAM modulation formats, i.e. 1.25 Gb/s, 2 Gb/s and 2.5 Gb/s for 4-QAM, and 2.5 Gb/s, 3.33 Gb/s and 4 Gb/s for 16-QAM. Experimental results show that in all cases the added chaotic phase does not degrade the legitimate user's signal quality while the illegal user cannot detect the signal without the key.