Electrical and Electronic Engineering - Research Publications

Permanent URI for this collection

http://hdl.handle.net/11343/362

Filters

2022 2
2
Reset filters

Settings
Statistics
Citations
Author: Skafidas, Efstratios × Author: Ganesan, Kumaravelu × Author: Yu, Yang × Start date: 2020 × End date: 2022 ×

Search Results

Now showing 1 - 2 of 2
  • Item
    No Preview Available
    Low‐Temperature Solution‐Processed Transparent QLED Using Inorganic Metal Oxide Carrier Transport Layers (Adv. Funct. Mater. 3/2022)
    Yu, Y ; Liang, Y ; Yong, J ; Li, T ; Hossain, MS ; Liu, Y ; Hu, Y ; Ganesan, K ; Skafidas, E (Wiley, 2022-01)
    In article number 2106387, Yang Yu, Efstratios Skafidas, and co-workers present transparent and fully solution processed inorganic quantum dots LED (QLED). To improve upon the structures hole injection efficiency, a low-temperature sol-gel derived copper doped NiO interlayer is introduced. The derived QLED analytical models and simulation results are in good concordance with experimental results, providing a new framework for the development of novel QLEDs.
  • Item
    Thumbnail Image
    Low-Temperature Solution-Processed Transparent QLED Using Inorganic Metal Oxide Carrier Transport Layers
    Yu, Y ; Liang, Y ; Yong, J ; Li, T ; Hossain, MS ; Liu, Y ; Hu, Y ; Ganesan, K ; Skafidas, E (WILEY-V C H VERLAG GMBH, 2022-01)
    Abstract Quantum dot light‐emitting diodes (QLEDs) represent an exciting new technology that has many desirable attributes when compared to existing organic LEDs (OLEDs) including increased brightness, contrast, and response time. Solution‐based fabrication approaches have the advantage of being able to produce large‐area electronic systems at reduced costs and critical in applications such as large display fabrication and electronics on curved surfaces including low‐profile augmented reality glasses. In this paper, for the first time, a fully solution‐processed transparent inorganic QLED is described. Traditional QLED fabrication methodologies require the use of air‐sensitive materials that make fabrication of these devices challenging and expensive. Instead of using air‐sensitive organic materials, in the approach, nickel oxide (NiO) is used as the hole transport layer and is deposited using a sol‐gel method. Copper doping of the NiO to reduce the turn‐on voltage of the QLED device is investigated. Importantly, the post‐annealing temperature of the sol‐gel process is below 275 °C, which permits the fabrication of QLEDs on a wide range of substrates. The experimental results are concordant with the COMSOL simulation data and demonstrate the feasibility of fabricating fully transparent inorganic QLED devices using a solution‐based process.