Electrical and Electronic Engineering - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 28
-
ItemStability properties of reset systems(Elsevier, 2005-01-01)Stability properties for a class of reset systems, such as systems containing a Clegg integrator, are investigated. We present Lyapunov based results for verifying L2 and exponential stability of reset systems. Our results generalize the available results in the literature and can be easily modified to cover Lp stability for arbitrary p ∈ [1;∞]. Several examples illustrate that introducing resets in a linear system may reduce the L2 gain if the reset controller parameters are carefully tuned.
-
ItemNONLINEAR SAMPLED DATA CONTROLLER REDESIGN VIA LYAPUNOV FUNCTIONS(Elsevier BV, 2005)We provide results for redesign of Lyapunov function based continuous time controllers for sampled-data implementation, using a particular form of the redesigned controller and the Taylor expansion of the sampled-data Lyapunov difference. We develop two types of redesigned controllers that (i) make the lower order terms (in T) in the series expansion of the Lyapunov difference with the redesigned controller more negative and (ii) make the terms in the Taylor expansions of the Lyapunov difference for the sampled-data system with the redesigned controller behave as close as possible to the respective values of the continuous-time system with the original controller. Simulation studies illustrate the performance of our controllers.
-
ItemNonlinear sampled-data observer design via approximate discrete-time models and emulation(Elsevier, 2005-01-01)We study observer design for sampled-data nonlinear systems using two approaches: (i) the observer is designed via an approximate discrete-time model of the plant; (ii) the observer is designed based on the continuous-time plant model and then discretized for sampled-data implementation (emulation). in each case we present Lyapunov conditions under which the observer design guarantees semiglobal practical convergence for the unknown exact discrete-time model. The semiglobal region of attraction is expanded by decreasing the sampling period. The practical convergence set is shrunk by decreasing either the sampling period, or a modelling parameter which refines the accuracy of the approximate model.
-
ItemL-2 anti-windup for linear dead-time systems(ELSEVIER, 2005-12-01)In this paper, we address and solve the problem of anti-windup augmentation for linear systems with input and output delay. In particular, we give a formal definition of an optimal L2 gain based anti-windup design problem in the global, local, robust and nominal cases. For each of these cases we show that a specific anti-windup compensation structure (which is a generalization of the approach in the Proceedings of the Fourth ECC, Brussels, Belgium, July 1997) is capable of solving the anti-windup problem whenever this solvable. The effectiveness of the proposed scheme is shown on a simple example taken from the literature, in which the plant is a marginally stable linear system
-
Itemℒ2 anti-windup for linear dead-time systems(Elsevier, 2005-12-01)
-
ItemAnalysis of input-to-state stability for discrete time nonlinear systems via dynamic programming(Elsevier, 2005-12-01)The input-to-state stability (ISS) property for systems with disturbances has received considerable attention over the past decade or so, with many applications and characterizations reported in the literature. The main purpose of this paper is to present analysis results for ISS that utilize dynamic programming techniques to characterize minimal ISS gains and transient bounds. These characterizations naturally lead to computable necessary and sufficient conditions for ISS. Our results make a connection between ISS and optimization problems in nonlinear dissipative systems theory (including L2-gain analysis and nonlinear H∞ theory). As such, the results presented address an obvious gap in the literature.
-
ItemA unified approach to controller design for achieving ISS and related properties(Institute of Electrical and Electronics Engineers, 2005-11-01)A unified approach to the design of controllers achieving various specified input-to-state stability (ISS) like properties is presented. Both full state and measurement feedback cases are considered. Synthesis procedures based on dynamic programming are given using the recently developed results on controller synthesis to achieve uniform l/sup /spl infin// bound. Our results provide a link between the ISS literature and the nonlinear H/sup /spl infin// design literature.
-
ItemLyapunov-based continuous-time nonlinear controller redesign for sampled-data implementation(Elsevier, 2005-07-01)Given a continuous-time controller and a Lyapunov function that shows global asymptotic stability for the closed-loop system, we provide several results for modification of the controller for sampled-data implementation. The main idea behind this approach is to use a particular structure for the redesigned controller and the main technical result is to show that the Fliess series expansions (in the sampling period T) of the Lyapunov difference for the sampled-data system with the redesigned controller have a very special form that is useful for controller redesign. We present results on controller redesign that achieve two different goals. The first goal is making the lower-order terms (in T) in the series expansion of the Lyapunov difference with the redesigned controller more negative. These control laws are very similar to those obtained from Lyapunov-based redesign of continuous-time systems for robustification of control laws and they often lead to corrections of the well-known “-LgV” form. The second goal is making the lower-order terms (in T) in the Fliess expansions of the Lyapunov difference for the sampled-data system with the redesigned controller behave as close as possible to the lower-order terms of the Lyapunov difference along solutions of the “ideal” sampled response of the continuous-time system with the original controller. In this case, the controller correction is very different from the first case and it contains appropriate “prediction” terms. The method is very flexible and one may try to achieve other objectives not addressed in this paper or derive similar results under different conditions. Simulation studies verify that redesigned controllers perform better (in an appropriate sense) than the unmodified ones when they are digitally implemented with sufficiently small sampling period T.
-
ItemRedesign techniques for nonlinear sampled-data control(European Mathematical Society, 2005)
-
Item