Infrastructure Engineering - Theses
Permanent URI for this collection
Search Results
1 - 2 of 2
-
ItemSite-Specific Ground Motions for Dynamic Analyses in Regions of Lower Seismicity( 2022)Site-specific dynamic analyses of structures have many advantages over traditional code spectrum procedures in regions of lower seismicity. The prime reason is that the site-specific response spectra and accelerograms are more realistic representations of earthquake actions for a structure located on a unique construction site. Developing site-specific ground motions requires a comprehensive understanding of regional seismic hazard analyses, soil condition analyses and site response analyses. Guidelines or facilities for performing site-specific dynamic analyses in accordance with the design code are unavailable to engineering practitioners in Australia. The primary objective of this thesis is to develop a computationally effective method to generate response spectra and accelerograms for site-specific dynamic analysis in intraplate regions of lower seismicity, with a focus on the Southeastern Australia (SEA) region. Based on the proposed method, this thesis provides suites of ground motions in compliance with the Australian standard for direct engineering applications. The conditional mean spectrum (CMS) methodology was first reviewed and its challenges for application in intraplate regions were overcome by employing a diversity of ground motion prediction expressions (GMPEs) and the uniform seismicity model. Three different schemes using a weighted averaging of candidate GMPEs were adopted, and a comparison of predictions demonstrated only minor differences confirming the robustness of the modelling. The constructed CMS were targeted for sourcing ground motions to define seismic hazard at the bedrock level. The bedrock motions were amplified through soil column models to simulate site amplification effects. Subsoil information retrieved from multiple borehole records from the same site was sampled to construct soil column models to achieve conservative estimations of soil amplification ratio at the fundamental period of vibration of the structure to account for resonance. The sampling process involves closed-form expressions for determining the shear strain profile in a soil column considering degradation in the shear modulus of the soil in seismic conditions. The applications of resultant site-specific response spectra and accelerograms, following a ground motion selection scheme proposed by the author, were demonstrated with nonlinear time history analysis for structural design and multiple stripe analysis for risk assessment. This thesis is concluded with three outcomes: (1) a ground motion database for site-specific seismic design based on twenty sites that typify subsoil profiles in SEA, (2) an online program at https://quakeadvice.org/ for generating ground motions with user-defined borehole information, and (3) suites of ground motions for risk assessment of structures following the multiple stripe analysis method.
-
ItemSeismic performance of concrete beam-slab-column systems constructed with a re-usable sheet metal formwork system( 2007)This report describes an investigation of seismic performance of a ribbed slab system constructed with an innovative re-usable sheet metal formwork system. Experimental results from quasi-static cyclic lateral load tests on half-scale reinforced concrete interior beam-slab-column subassemblages are presented. The test specimen was detailed according to the Australian code (AS 3600) without any special provision for seismicity. This specimen was tested up to a drift ratio of 4.0 %. Some reinforcement detailing problems were identified from the first test. The damaged specimen was then rectified using Carbon Fibre Reinforced Polymer (CFRPs), considering detailing deficiencies identified in the first test. The repaired test specimen was tested under a lateral cyclic load as per the original test arrangement up to a drift level of 4%. The performance of the repaired specimen showed significant improvement with respect to the level of damage and strength degradation. The results of the rectified specimen indicate that the use of CFRPs may offer a viable retrofit/repair strategy in the case of damaged structures, where this damage may be significant. Two finite element analysis models were created and results of the first test were used to calibrate the FE model. The second FE model was used to obtain detail information about stress and strain behaviour of various components of the beam-column subassemblage and to check the overall performance before carrying out expensive lab tests. It was concluded that finite element modelling predictions were reliable and could be used to obtain more information compared to conventional type laboratory tests. Time-history analyses show that the revised detailing is suitable to withstand very large earthquakes without significant structural damage.