Infrastructure Engineering - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 592
-
ItemEnergy Efficient Time Synchronization in WSN for Critical Infrastructure Monitoring(SPRINGER-VERLAG BERLIN, 2011-01-01)Wireless Sensor Networks (WSN) based Structural Health Monitoring (SHM) is becoming popular in analyzing the life of critical infrastructure such as bridges on a continuous basis. For most of the applications, data aggregation requires high sampling rate. A need for accurate time synchronization in the order of 0.6 − 9 μs every few minutes is necessary for data collection and analysis. Two-stage energy-efficient time synchronization is proposed in this paper. Firstly, the network is divided into clusters and a head node is elected using Low-Energy Adaptive Clustering Hierarchy based algorithm. Later, multiple packets of different lengths are used to estimate the delay between the elected head and the entire network hierarchically at different levels. Algorithmic scheme limits error to 3-hop worst case synchronization error. Unlike earlier energy-efficient time synchronization schemes, the achieved results increase the lifetime of the network.
-
ItemApplications of phase change materials in concrete for sustainable built environment: a review(ICSECM 2011, 2011)The fast economic development around the globe and high standards of living imposes an ever increasing demand for energy. As a prime consumer of world‟s material and energy resources building and construction industry has a great potential in developing new efficient and environmentally friendly materials to reduce energy consumptions in buildings. Thermal energy storage systems (TES) with Phase change materials (PCM) offer attractive means of improving the thermal mass and the thermal comfort within a building. PCMs are latent heat thermal storage (LHTS) materials with high energy storage density compared to conventional sensible heat storage materials. Concrete incorporating PCM improves the thermal mass of the building which reduces the space conditioning energy consumption and extreme temperature fluctuations within the building. The heat capacity and high density of concrete coupled with latent heat storage of PCM provides a novel energy saving concepts for sustainable built environment. Microencapsulation is a latest and advanced technology for incorporation of PCM in to concrete which creates finely dispersed PCMs with high surface area for greater amount of heat transfer. This paper reviews available literature on Phase change materials in concrete, its application and numerical modelling of composite concrete. However most of the existing TES systems have been explored with wallboards and plaster materials and comparatively a few researches have been done on TES systems using cementitious materials. Thus, there is a need for comprehensive experimental and analytical investigations on PCM applications with cementitious materials as the most widely used construction materials in buildings.
-
ItemApplication of nanomaterials in the sustainable built environment(University of Moratuwa, 2010)Nanotechnology is widely regarded as one of the twenty-first century’s key technologies, and its economic importance is sharply on the rise. In the construction industry, nanomaterials has potentials that are already usable today, especially the functional characteristics such as increased tensile strength, self-cleaning capacity, fire resistance, and additives based on nano materials make common materials lighter, more permeable, and more resistant to wear. Nanomaterial are also considered extremely useful for roofs and facades in the built environment. They also expand design possibilities for interior and exterior rooms and spaces. Nano–insulating materials open up new possibilities for ecologically oriented sustainable infrastructure development. It has been demonstrated that nanotechnology has invented products with many unique characteristics which could significantly provide solutions current construction issues and may change the requirement and organization of construction process. This paper examines and documents applicable nanotechnology based products that can improve the sustainable development and overall competitiveness of the construction industry.
-
ItemApplication of nano insulation materials in the sustainable built environment(University of Moratuwa, 2010)Nanotechnology is widely being used in the built environment for its advantages in many improved engineering properties of the nano materials. Nano insulating materials open up new possibilities for ecologically oriented sustainable infrastructure development. The most widely used nano material in built environment is for the purpose of insulation to improve the energy efficiency namely in the buildings and dwellings. Nanotechnology has now provided an effective and affordable means to increase energy efficiency in pre-existing buildings as well as new construction by increasing thermal resistance. The major advantage of nano insulation materials is its benefit of translucent coatings which increase the thermal envelope of a building without reducing the square footage. The intrinsic property of nano insulating material is it can be applied to windows to reduce heat transfer from solar radiation due it its thermal resistant property and the translucent property allows diffusing of day light. The nano insulating material has significant advantage in reducing the operational energy aspects of buildings due to its valuable insulating properties. This paper examines applicable nanotechnology based products that can improve the sustainable development and overall competitiveness of the building industry. The areas of applying nano insulating material in building industry will be mainly focused on the building envelope. The paper also examines the potential advantages of using nanotechnology based insulating material in reducing the life cycle energy, reduction of material usage and enhancing the useable life span. The paper also investigates the operational energy by simulation methodology and compares the reduction of operational energy consumption.
-
ItemEndoplasmic reticulum stress promotes LIPIN2-dependent hepatic insulin resistance.(American Diabetes Association, 2011-04)OBJECTIVE: Diet-induced obesity (DIO) is linked to peripheral insulin resistance-a major predicament in type 2 diabetes. This study aims to identify the molecular mechanism by which DIO-triggered endoplasmic reticulum (ER) stress promotes hepatic insulin resistance in mouse models. RESEARCH DESIGN AND METHODS: C57BL/6 mice and primary hepatocytes were used to evaluate the role of LIPIN2 in ER stress-induced hepatic insulin resistance. Tunicamycin, thapsigargin, and lipopolysaccharide were used to invoke acute ER stress conditions. To promote chronic ER stress, mice were fed with a high-fat diet for 8-12 weeks. To verify the role of LIPIN2 in hepatic insulin signaling, adenoviruses expressing wild-type or mutant LIPIN2, and shRNA for LIPIN2 were used in animal studies. Plasma glucose, insulin levels as well as hepatic free fatty acids, diacylglycerol (DAG), and triacylglycerol were assessed. Additionally, glucose tolerance, insulin tolerance, and pyruvate tolerance tests were performed to evaluate the metabolic phenotype of these mice. RESULTS: LIPIN2 expression was enhanced in mouse livers by acute ER stress-inducers or by high-fat feeding. Transcriptional activation of LIPIN2 by ER stress is mediated by activating transcription factor 4, as demonstrated by LIPIN2 promoter assays, Western blot analyses, and chromatin immunoprecipitation assays. Knockdown of hepatic LIPIN2 in DIO mice reduced fasting hyperglycemia and improved hepatic insulin signaling. Conversely, overexpression of LIPIN2 impaired hepatic insulin signaling in a phosphatidic acid phosphatase activity-dependent manner. CONCLUSIONS: These results demonstrate that ER stress-induced LIPIN2 would contribute to the perturbation of hepatic insulin signaling via a DAG-protein kinase C ε-dependent manner in DIO mice.
-
ItemThe behavior of stratified pools in the Wimmera River, Australia(AMER GEOPHYSICAL UNION, 1996-10)Numerous inland Australian streams contain density‐stratified or saline pools, which are usually located on channel bends. Saline pools consist of a layer of saline water underlying a layer of fresh water. Saline pools generally form as a result of saline groundwater seeping into the stream and collecting in scour depressions during periods of low flow. Inflows of saline river water can also collect in scour depressions. Field and laboratory investigations of saline pool mixing by overflowing fresh water reveal that mixing depends on a balance between interfacial shear and buoyancy forces acting on a thin dense layer flowing up the downstream slope of the scour depression, and on the bend sharpness. Convection associated with surface cooling also causes mixing. A model for saline pools formed by groundwater inflows and mixed by fresh overflows is proposed and applied to several saline pools in the Wimmera River.
-
ItemPreferred states in spatial soil moisture patterns: Local and nonlocal controls(AMER GEOPHYSICAL UNION, 1997-12)In this paper we develop a conceptual and observational case in which soil water patterns in temperate regions of Australia switch between two preferred states. The wet state is dominated by lateral water movement through both surface and subsurface paths, with catchment terrain leading to organization of wet areas along drainage lines. We denote this as nonlocal control. The dry state is dominated by vertical fluxes, with soil properties and only local terrain (areas of high convergence) influencing spatial patterns. We denote this as local control. The switch is described in terms of the dominance of lateral over vertical water fluxes and vice versa. When evapotranspiration exceeds rainfall, the soil dries to the point where hydraulic conductivity is low and any rainfall that occurs essentially wets up the soil uniformly and is evapotranspired before any significant lateral redistribution takes place. As evapotranspiration decreases and/or rainfall increases, areas of high local convergence become wet, and runoff that is generated moves downslope, rapidly wetting up the drainage lines. In the wet to dry transitional period a rapid increase in potential evapotranspiration (and possibly a decrease in rainfall) causes drying of the soil and “shutting down” of lateral flow. Vertical fluxes dominate and the “dry” pattern is established. Three data sets from two catchments are presented to support the notion of preferred states in soil moisture, and the results of a modeling exercise on catchments from a range of climatic conditions illustrate that the conclusions from the field studies may apply to other areas. The implications for hydrological modeling are discussed in relation to methods for establishing antecedent moisture conditions for event models, for distribution models, and for spatially distributing bulk estimates of catchment soil moisture using indices.
-
ItemThe Tarrawarra data set: Soil moisture patterns, soil characteristics, and hydrological flux measurements(AMER GEOPHYSICAL UNION, 1998-10)Experiments investigating the spatial variability of soil moisture conducted in the 10.5 ha Tarrawarra catchment, southeastern Australia, are described. The resulting data include high‐resolution soil moisture maps (over 10,000 point measurements at up to 2060 sites), information from 125 soil cores, over 1000 soil moisture profiles from 20 sites, 2500 water level measurements from 74 piezometers, surface roughness and vegetation measurements, meteorological and hydrological flux measurements, and topographic survey data. These experiments required a major commitment of resources including 250 person days in the field, with a further 100 person days in the laboratory preparing for field trips and checking and collating data. These data are available on the World Wide Web (http://www.civag.unimelb.edu.au/data/).
-
ItemObserved spatial organization of soil moisture and its relation to terrain indices(AMER GEOPHYSICAL UNION, 1999-03)We analyze the degree of spatial organization of soil moisture and the ability of terrain attributes to predict that organization. By organization we mean systematic spatial variation or consistent spatial patterns. We use 13 observed spatial patterns of soil moisture, each based on over 500 point measurements, from the 10.5 ha Tarrawarra experimental catchment in Australia. The measured soil moisture patterns exhibit a high degree of organization during wet periods owing to surface and subsurface lateral redistribution of water. During dry periods there is little spatial organization. The shape of the distribution function of soil moisture changes seasonally and is influenced by the presence of spatial organization. Generally, it is quite different from the shape of the distribution functions of various topographic indices. A correlation analysis found that ln(a), where a is the specific upslope area, was the best univariate spatial predictor of soil moisture for wet conditions and that the potential radiation index was best during dry periods. Combinations of ln(a) or ln(a/tan(β)), where β is the surface slope, and the potential solar radiation index explain up to 61% of the spatial variation of soil moisture during wet periods and up to 22% during dry periods. These combinations explained the majority of the topographically organized component of the spatial variability of soil moisture a posteriori. A scale analysis indicated that indices that represent terrain convergence (such as ln(a) or ln(a/tan(β))) explain variability at all scales from 10 m up to the catchment scale and indices that represent the aspect of different hillslopes (such as the potential solar radiation index) explain variability at scales from 80 m to the catchment scale. The implications of these results are discussed in terms of the organizing processes and in terms of the use of terrain attributes in hydrologic modeling and scale studies. A major limitation on the predictive power of terrain indices is the degree of spatial organization present in the soil moisture pattern at the time for which the prediction is made.
-
ItemToward capturing hydrologically significant connectivity in spatial patterns(AMER GEOPHYSICAL UNION, 2001-01)Many spatial fields exhibit connectivity features that have an important influence on hydrologic behavior. Examples include high‐conductivity preferred flow paths in aquifers and saturated source areas in drainage lines. Connected features can be considered as arbitrarily shaped bands or pathways of connected pixels having similar (e.g., high) values. Connectivity is a property that is not captured by standard geostatistical approaches, which assume that spatial variation occurs in the most random possible way that is consistent with the spatial correlation, nor is it captured by indicator geostatistics. An alternative approach is to use connectivity functions. In this paper we apply connectivity functions to 13 observed soil moisture patterns from the Tarrawarra catchment and two synthetic aquifer conductivity patterns. It is shown that the connectivity functions are able to distinguish between connected and disconnected patterns. The importance of the connectivity in determining hydrologic behavior is explored using rainfall‐runoff simulations and groundwater transport simulations. We propose the integral connectivity scale as a measure of the presence of hydrologic connectivity. Links between the connectivity functions and integral connectivity scale and simulated hydrologic behavior are demonstrated and explained from a hydrologic process perspective. Connectivity functions and the integral connectivity scale provide promising means for characterizing features that exist in observed spatial fields and that have an important influence on hydrologic behavior. Previously, this has not been possible within a statistical framework.