Infrastructure Engineering - Research Publications

Permanent URI for this collection

Search Results

Now showing 1 - 10 of 67
  • Item
    Thumbnail Image
    Multiple stable states in hydrological models: An ecohydrological investigation
    Peterson, TJ ; Argent, RM ; Western, AW ; Chiew, FHS (American Geophysical Union, 2009-03-07)
    Many physical-based models of surface and groundwater hydrology are constructed without the possibility of multiple stable states for the same parameter set. For such a conceptualization, at the cessation of a transient hydrological disturbance of any magnitude the model will return to the same stable state and thus show an infinite resilience. To highlight and falsify this assumption, a numerical distributed ecohydrological model (coupled hillslope Boussinesq-vertically lumped vadose zone) is presented, in which qualitatively different steady state water table elevations exist for the same parameter set. The multiple steady states are shown to emerge from a positive feedback arising from a reduction in leaf area index (LAI) and thus transpiration, as a saline water table approaches the surface. Limit cycle continuation is also undertaken to quantify the state-space location of the threshold (repellor) between the steady states (attractors) and quantify the resilience. While the model is biophysically simple, it is sufficiently complex to challenge this potentially significant assumption within water resource planning.
  • Item
    Thumbnail Image
    Optimization of a similarity measure for estimating ungauged streamflow
    Reichl, JPC ; Western, AW ; McIntyre, NR ; Chiew, FHS (AMER GEOPHYSICAL UNION, 2009-10-17)
    One approach to predicting streamflow in an ungauged catchment is to select an ensemble of hydrological models previously identified for similar gauged catchments, where the similarity is based on some combination of important physical catchment attributes. The focus of this paper is the identification of catchment attributes and optimization of a similarity measure to produce the best possible ungauged streamflow predictions given a data set and a conceptual model structure. As a case study, the SimHyd rainfall‐runoff model is applied to simulate monthly streamflow in 184 Australian catchments. Initial results show that none of 27 catchment attributes can be safely said to consistently give a better ensemble of models than random selection when used independently of other attributes. This is contrary to prior expectations and indicates the sparseness of information within our database of catchments, the importance in this case of prior knowledge for defining important attributes, and the potential importance of combining multiple attributes in order to usefully gauge similarity. Seven relatively independent attributes are then selected on the basis of prior knowledge. The weight with which each of these attributes contributes to the similarity measure is optimized to maximize streamflow prediction performance across a set of 95 catchments. The other 89 catchments are used to independently test the accuracy of streamflow predictions. Using the optimal set of weights led to marked improvement in the accuracy of predictions, showing that the method, while inferior to local calibration, is superior to alternative methods of model regionalization based on regression and spatial proximity. However, there is evidence of nonuniqueness in the optimal solution and the possibility that the attribute weights are somewhat dependent on the catchments used.
  • Item
    Thumbnail Image
    Improved capital procurement through increased use of quantitatively-based decisions
    Xu, M ; Duffield, C (Department of Civil Engineering, National Taiwan University, 2008)
    The procurement of major capital projects always involves significant risk and uncertainties and this is one of the primary causes for the variations from expected outcomes. This paper outlines the delimitation between strategies for making complex decisions using quantitative analyses as opposed to the techniques and applications currently being used by project and construction managers. Various approaches have been developed and adopted by researchers and practitioners to improve the quality of critical project decisions to maximise benefits. Strategic frameworks and organisational hierarchies are frequently deemed as an optimal solution from the perspective of industrial participants, while numerous researchers indicate decisions with quantitative evidences, underpinned by proper choice of technique, will add additional benefits over current industrial practices. It is asserted that improved decisions can be made through the additional use of quantitative approaches. This paper reports the finding of a study that has identified where the increased use of quantitative approaches may assist project and construction managers and proposes a mechanism to confirm the potential benefits.
  • Item
    Thumbnail Image
    Interpretation of qualitative and quantitative information for project reviews: A fuzzy-based approach for OGC ™ gateway review (GR) colour code system (CCS)
    Xu, M ; Duffield, C ; Pelham, N (Department of Civil Engineering, National Taiwan University, 2008)
    Independent project reviews are gaining popularity as a technique to improve project outcomes through the timely identification of outstanding project risks. A common technique is that of a Gateway. The Gateway Review Process (GRP) appraises qualitative and quantitative risks and reports the findings via a Colour Code System (CCS) of Red/Amber/Green (R/A/G). Medium to high risk projects that exceed certain risk thresholds are eligible for GRP. Intuitive recognition of potential risks from the application of CCS is insufficient to determine the value gained from the process. This paper attempts to shed light on a tentative effort to interpret the CCS into numerical descriptions by using fuzzy-based method on a survey outcome. This quantitative interpretation of the CCS would then be adopted to provide a measure and understanding (decision evidence) of the benefits obtained through project review such as GRP.
  • Item
    Thumbnail Image
    Quantification of the contribution of non-structural components to the structural performance of high-rise buildings
    Li, B ; Duffield, CF ; Hutchinson, GL (Department of Civil Engineering, National Taiwan University, 2008-12-01)
    Non-structural components (NSCs) such as infill walls, façades, stairs, and windows are normally considered as non-load bearing components in the design of buildings. However, a number of researchers have identified that those so-called NSCs have a significant contribution to the lateral performance of the structure. This paper presents the findings of the investigation into the influence of a variety of NSCs on the performance of typical high-rise framed structures via the observation of the influence of these NSCs on the shear and flexural performance, as well as the lateral stiffness of the structures. Finite element (FE) models have been developed to analyse storey drifts, shear force distributions, bending moment distributions, and joint rotations under different structural configurations. The results of the study indicate a significant decrease of the storey drift can be achieved by including different NSCs to the structural frame. Dramatic changes to both the bending moment and the shear force distributions in the inner columns of the structural frame are resulted from the inclusion of NSCs. However, the influence of these NSCs on the flexural and shear performance of the outer columns of the building is significantly less than that of the inner columns. It is concluded that the enhanced performance of actual buildings by including NSCs provides opportunity for refining of the lateral deflection of the building for the serviceability limit states.
  • Item
    No Preview Available
    Accuracy of satellite measured wave heights in the Australian region for wave power applications
    MEATH, SE ; AYE, L ; HARITOS, N (SAGE Publications, 2008-06-01)
    This article focuses on the accuracy of satellite data, which may then be used in wave power applications. The satellite data are compared to data from wave buoys, which are currently considered to be the most accurate of the devices available for measuring wave characteristics. This article presents an analysis of satellite- (Topex/Poseidon) and buoy-measured significant wave heights for a 1-year period at Cape Sorell and Rottnest Island, off the Australian coast. The analysis found that the satellite-measured wave heights showed a slight positive bias. This is contrary to the findings of most other authors, who have analyzed data from the Northern Hemisphere and generally found a negative bias in the satellite-measured wave heights. The implication is that calibration functions to improve the correlation between the buoy and satellite data may vary for different hemispheres or even regions within these.
  • Item
    No Preview Available
    Thermal evaluation of a greenhouse in a remote high altitude area of Nepal
    Fuller, RJ ; Aye, L ; Zahnd, A ; Thakuri, S (RERIC, 2009-06-01)
    Remote communities in the high altitude areas of Nepal suffer both chronic and acute malnutrition. This is due to a shortage of arable land and a harsh climate. For seven months of the year, the harvesting of fresh vegetables is almost impossible. Greenhouse technology, if appropriate for the location and its community, can extend the growing season considerably. Experience in the Ladakh region of India indicates that year-round cropping is possible in greenhouses in cold mountainous areas. A simple 50-m 2 greenhouse has been constructed in Simikot, the main town of Humla, northwest Nepal. This paper describes the evaluation of the thermal performance of that greenhouse. Both measurement and simulation were used in the evaluation. Measurements during the winter of 2006-7 indicate that the existing design is capable of producing adequate growing conditions for some vegetable crops, but that improvements are required if crops like tomatoes are to be grown successfully. Options to improve the thermal performance of the greenhouse have been investigated by simulation. Improvements to the building envelope such as wall insulation, double-glazing and using a thermal screen were simulated with a validated TRNSYS model. The impact of the addition of nighttime heat from internal passive solar water collectors was also predicted. The simulations indicate that the passive solar water collectors would raise the average greenhouse air temperature by 2.5°C and the overnight air temperature would increase by 4.0°C. When used in combination, overnight temperatures are predicted to by almost 7°C higher.
  • Item
    Thumbnail Image
    Analysis of the platypus genome suggests a transposon origin for mammalian imprinting
    Pask, AJ ; Papenfuss, AT ; Ager, EI ; Mccoll, KA ; Speed, TP ; Renfree, MB (BIOMED CENTRAL LTD, 2009)
    BACKGROUND: Genomic imprinting is an epigenetic phenomenon that results in monoallelic gene expression. Many hypotheses have been advanced to explain why genomic imprinting evolved in mammals, but few have examined how it arose. The host defence hypothesis suggests that imprinting evolved from existing mechanisms within the cell that act to silence foreign DNA elements that insert into the genome. However, the changes to the mammalian genome that accompanied the evolution of imprinting have been hard to define due to the absence of large scale genomic resources between all extant classes. The recent release of the platypus genome has provided the first opportunity to perform comparisons between prototherian (monotreme; which appear to lack imprinting) and therian (marsupial and eutherian; which have imprinting) mammals. RESULTS: We compared the distribution of repeat elements known to attract epigenetic silencing across the entire genome from monotremes and therian mammals, particularly focusing on the orthologous imprinted regions. There is a significant accumulation of certain repeat elements within imprinted regions of therian mammals compared to the platypus. CONCLUSIONS: Our analyses show that the platypus has significantly fewer repeats of certain classes in the regions of the genome that have become imprinted in therian mammals. The accumulation of repeats, especially long terminal repeats and DNA elements, in therian imprinted genes and gene clusters is coincident with, and may have been a potential driving force in, the development of mammalian genomic imprinting. These data provide strong support for the host defence hypothesis.
  • Item
    Thumbnail Image
    mo' justis: the law of defamation in Texas
    Park, M. M. (The Victorian Bar, 2008/2009)
    When the local newspaper published a satirical article lampooning the justice dispensed in the local juvenile court the judge and prosecutor sued for libel and the case continued for five years before the newspaper’s right to publish was upheld. The application to appeal the decision in favour of the newspaper was denied by the US Supreme Court.
  • Item
    Thumbnail Image
    [Review of the book Better: a surgeon's notes on performance]
    Park, M. M. ( 2008)
    Author-surgeon’s book describes improved outcomes by improving on performance.