Infrastructure Engineering - Research Publications
Permanent URI for this collection
Search Results
1 - 8 of 8
-
ItemNo Preview AvailableUpcycling opportunities and potential markets for aluminium composite panels with polyethylene core (ACP-PE) cladding materials in Australia: A review(ELSEVIER SCI LTD, 2022-10-18)Many buildings worldwide have high fire-risk materials as part of their cladding. As governments in Australia strive to make buildings safer, it is expected that a large volume of end-of-life dangerous cladding will be replaced with safer materials. This high volume of hazardous materials might be upcycled into value-added products. This article presents a systematic market analysis and literature review in identifying current and potential uses for the raw materials used in hazardous ACP-PE cladding. The most promising areas were identified to be non-food-contact packaging (US$228 M p.a.), non-pressure pipes (US$30 M p.a.), footwear (US$5.29 M p.a.) and 3D printer filament (US$2.73 M p.a.)
-
ItemNew normal remote communication for collaboration (presentation)( 2021-12-19)Presented at the 12th International Conference on Structural Engineering and construction Management (ICSECM) 2021, Kandy, Sri Lanka (17-19 December)
-
ItemNo Preview AvailableEffects of learning curve models on onshore wind and solar PV cost developments in the USA(PERGAMON-ELSEVIER SCIENCE LTD, 2022-03-01)Technological innovation planning for developing and deploying clean energy technologies plays a key role in reducing greenhouse gas emissions and transition to a low-carbon future. Learning curve theory has been adopted as a common framework for exploring the relationship between endogenous technological learning and technology cost developments. The aim of this article is to analyse the effects of selecting different learning curve approaches (i.e. model formulations) to describe energy technology cost changes over time. Experience and knowledge stock are chosen as the sources of learning to be considered. A new definition of experience was developed to account for the interaction between global and local experience. The new definition of experience also accounts for learning sub-processes (i.e. learning-by-doing, learning-by-using, and experience spillovers) to estimate total experience gained through technology deployment. An integrative model is developed for estimating the effects of learning-by-deploying and learning-by-researching on cost developments for onshore wind and solar PV in the USA. Publicly available data from government departments and organisations were utilised. It was found that technology cost developments are better explained when: (1) experience is defined as a function of global and local experience; (2) knowledge stock is also considered in the model formulation; and (3) technological processes affect only a fraction of the total capital cost. The findings suggested that the application of learning rates for model-based energy planning is context-dependent and how technological factors are explicitly defined may have significantly different policy implications (i.e. different technology costs predictions based on alternative model formulations).
-
ItemNo Preview AvailableDataset on effects of learning curve models on onshore wind and solar PV cost developments in the USA (Version 2)( 2022-02-21)This dataset includes input data to estimate learning-by-deploying (LbD) and learning-by-researching (LbR) rates for onshore wind and solar PV in the United States of America (USA). Using different learning curve approaches the simulated technological-based cost developments are also presented. Coefficient of determination (R squared) and Root Mean Square Error (RMSE) were applied for quantification of the agreement between simulated and observed technological-based costs.
-
ItemNo Preview AvailableDataset on effects of learning curve models on onshore wind and solar PV cost developments in the USA( 2021-11-03)This dataset includes input data to estimate learning-by-deploying (LbD) and learning-by-researching (LbR) rates for onshore wind and solar PV in the United States of America (USA). Using different learning curve approaches the simulated technological-based cost developments are also presented. Coefficient of determination (R squared) and Root Mean Square Error (RMSE) were applied for quantification of the agreement between simulated and observed technological-based costs.
-
ItemNo Preview AvailableConstruction Project Managers Graduate Agile Competencies Required to Meet Industry Needs(Springer, Singapore, 2021-01-01)The construction industry is embracing new management challenges to deal with the ever-increasing needs for collaboration, environmental and social responsibilities. Improvements in construction project management competencies are essential to helping the construction sector to embrace the new challenges. Building engineering management capabilities through the correct training are therefore essential. In research involving the twenty-four largest contractors in Australia ‘Lean construction’ was identified as an important skill to be included in academic programs that has not yet fully been embraced. Contractors are not yet seeing ‘lean’ and ‘agile’ methods as important approaches to improve communication within the teams and between projects. This research highlighted that although contractors identified communication as one of themain skills needed to achieve a good performance in project construction management they do not yet recognise that training in lean and agile methodologies will help them to improve communication not only between professionals but between projects and organisations involved in each project in improving business goals.
-
ItemNo Preview AvailableDataset on effects of learning curve models on clean energy technology cost developments( 2021-01-21)This dataset includes input data to estimate learning-by-doing (LbD) and learning-by-researching (LbR) rates for onshore wind and solar PV in the United States. Using different learning curve approaches the simulated technology cost developments are also presented. Coefficient of determination (R square) and Root Mean Square Error (RMSE) were applied for quantification of the agreement between simulated and observed technology costs.
-
ItemLean Practices Using Building Information Modeling (BIM) and Digital Twinning for Sustainable Construction(MDPI, 2021-01-01)There is a need to apply lean approaches in construction projects. Both BIM and IoT are increasingly being used in the construction industry. However, using BIM in conjunction with IoT for sustainability purposes has not received enough attention in construction. In particular, the capability created from the combination of both technologies has not been exploited. There is a growing consensus that the future of construction operation tends to be smart and intelligent, which would be possible by a combination of both information systems and sensors. This investigation aims to find out the recent efforts of utilizing BIM for lean purposes in the last decade by critically reviewing the published literature and identifying dominant clusters of research topics. More specifically, the investigation is further developed by identifying the gaps in the literature to utilize IoT in conjunction with BIM in construction projects to facilitate applying lean techniques in a more efficient way in construction projects. A systematic review method was designed to identify scholarly papers covering both concepts “lean” and “BIM” in construction and possibilities of using IoT. A total of 48 scholarly articles selected from 26 construction journals were carefully reviewed thorough perusal. The key findings were discussed with industry practitioners. The transcriptions were analyzed employing two coding and cluster analysis techniques. The results of the cluster analysis show two main directions, including the recent practice of lean and BIM interactions and issues of lean and BIM adoption. Findings revealed a large synergy between lean and BIM in control interactions and reduction in variations, and surprisingly there are many uncovered areas in this field. The results also show that the capability of IoT is also largely not considered in recent developments. The number of papers covering both lean and BIM is very limited, and there is a large clear gap in understanding synergetic interactions of lean concepts applying in BIM and IoT in specific fields of construction such as sustainable infrastructure projects.