Infrastructure Engineering - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 12
-
ItemNo Preview AvailableA review of micro hydro systems in urban areas: Opportunities and challenges(PERGAMON-ELSEVIER SCIENCE LTD, 2022-11)
-
ItemA Technology Assessment Approach for Achieving Sustainable Communities: An Energy Master Plan for a New Urban Development(MDPI, 2022-04)In the era of climate change and rapid urbanisation, communities and infrastructures need to be planned and designed in a way that promotes sustainable living. The provision of clean and affordable energy is a key to this aim. This paper proposes a technology assessment approach that is based on the triple bottom line (environmental, social and economic) sustainability framework. This approach can be employed in the technology screening that is involved in the early stages of the energy master planning process and can be applied to different community typologies in various locations and climates. The developed approach is demonstrated through a new urban renewal project case study in Fishermans Bend, Melbourne, in which a set of technological options were screened according to the project’s goals. The connection between the energy master plan and local and global sustainable development goals is discussed and policy interventions are proposed. The results show that the proposed approach could effectively enable the evaluation of the technological sustainability performance of the community by demonstrating the design trade-offs and the implementation of the sustainability objectives during the energy master planning process. Moreover, the proposed approach could provide guidance for effective policy making. It was found that government energy policies, regulations and incentives play a vital role in the feasibility of an energy master plan. Lastly, the proposed approach could facilitate the achievement of local and international targets, such as the UN SDGs, by 2050.
-
ItemApplication of Artificial Neural Networks for Virtual Energy Assessment(MDPI, 2021-12)A Virtual energy assessment (VEA) refers to the assessment of the energy flow in a building without physical data collection. It has been occasionally conducted before the COVID-19 pandemic to residential and commercial buildings. However, there is no established framework method for conducting this type of energy assessment. The COVID-19 pandemic has catalysed the implementation of remote energy assessments and remote facility management. In this paper, a novel framework for VEA is developed and tested on case study buildings at the University of Melbourne. The proposed method is a hybrid of top-down and bottom-up approaches: gathering the general information of the building and the historical data, in addition to investigating and modelling the electrical consumption with artificial neural network (ANN) with a projection of the future consumption. Through sensitivity analysis, the outdoor temperature was found to be the most sensitive (influential) parameter to electrical consumption. The lockdown of the buildings provided invaluable opportunities to assess electrical baseload with zero occupancies and usage of the building. Furthermore, comparison of the baseload with the consumption projection through ANN modelling accurately quantifies the energy consumption attributed to occupation and operational use, referred to as ‘operational energy’ in this paper. Differentiation and quantification of the baseload and operational energy may aid in energy conservation measures that specifically target to minimise these two distinct energy consumptions.
-
ItemLessons Learned from PCM Embedded Radiant Chilled Ceiling Experiments in Melbourne(Elsevier, 2022-06)Buildings are responsible for over a third of energy consumption worldwide, particularly for the increasing demand of air-conditioners in response to the more extreme heat around the globe. It is imperative to move towards more energy-efficient space cooling alternatives. The integration of phase change material (PCM) with a radiant chilled ceiling (RCC) is a promising technology due to its benefits regarding energy efficiency and indoor environmental quality. This article presents a field study conducted on a newly-developed PCM embedded radiant chilled ceiling (PCM-RCC) installed in a stand-alone cabin located in Melbourne. The study evaluates the thermal and energy performance of the system through investigation of the transient thermal behaviour of PCM panels in charging-discharging cycles, the indoor comfort conditions, and the electricity peak demand. It was observed that the proposed PCM-RCC can provide satisfactory comfort conditions and contribute to load shifting if a refined operating strategy is applied. The efficiency of PCM recharge overnight depends on several factors that need to be carefully considered in design. The challenges related to the implementation of optimal operating dynamic schedules in response to the thermal behaviour of PCM-RCC, and accurate weather forecasting should be addressed to realise the full potential of this technology.
-
ItemNo Preview AvailablePandemic products and volatile chemical emissions(Springer, 2021-01)The recent pandemic (COVID-19) has seen a sweeping and surging use of products intended to clean and disinfect, such as air sprays, hand sanitizers, and surface cleaners, many of which contain fragrance. However, exposure to fragranced cleaning products has been associated with adverse effects on human health. Products can emit a range of volatile chemicals, including some classified as hazardous, but relatively few ingredients are disclosed to the public. Thus, relatively little is known about the specific emissions from these products. This study investigates the volatile organic compounds (VOCs) emitted from “pandemic products” that are being used frequently and extensively in society. In addition, among these emissions, this study identifies potentially hazardous compounds, compares so-called green and regular versions of products, and examines whether ingredients are disclosed to the public. Using gas chromatography/mass spectrometry, 26 commonly used pandemic products, including 13 regular and 13 so-called green versions, were analyzed for their volatile emissions. Product types included hand sanitizers, air disinfectants, multipurpose cleaners, and handwashing soap. All products were fragranced. The analyses found the products collectively emitted 399 VOCs with 127 VOCs classified as potentially hazardous. All products emitted potentially hazardous compounds. Comparing regular products and green products, no significant difference was found in the emissions of the most prevalent compounds. Further, among the 399 compounds emitted, only 4% of all VOCs and 11% of potentially hazardous VOCs were disclosed on any product label or safety data sheet. This study reveals that pandemic products can generate volatile emissions that could pose risks to health, that could be unrecognized, and that could be reduced, such as by using fragrance-free versions of products.
-
ItemAlternative Heating and Cooling Systems for the Retrofit of Medium-Rise Residential Buildings in Greece(WILEY-V C H VERLAG GMBH, 2021-11)The European Union recently set the target of doubling building retrofit rates through the European Green Deal. Currently, more than half of the households’ energy consumption is accounted for space conditioning, with southern European countries experiencing increasing demand for cooling systems over the past decade. Herein, the performance of market‐available heating and cooling systems that can replace the existing low‐efficiency systems in multiresidential buildings in Greece is compared. The study's objectives are to minimize the operating greenhouse gas emissions and the life‐cycle cost. Results demonstrate that air‐to‐air heat pumps have the lowest life‐cycle cost. In areas where natural gas is not available, the replacement of the diesel‐oil boiler with a biomass boiler leads to a 48% to 73% decrease of the operating greenhouse gas emissions. In areas where natural gas is available, the gas absorption heat pump has the lowest operating greenhouse gas emissions, demonstrating a reduction between 40% and 54% when compared to a conventional gas boiler; however, it dramatically increases the life‐cycle cost, making it less attractive than heat pumps and condensing gas boilers. The findings are in line with the current residential space conditioning market, while indicating the potential of biomass boilers and gas absorption heat pumps.
-
ItemUtilizing a Building Information Modelling Environment to Communicate the Legal Ownership of Internet of Things-Generated Data in Multi-Owned Buildings(Multidisciplinary Digital Publishing Institute ( M D P I AG), 2019-11-01)In multi-owned buildings, a community of residents live in their private properties while they use and share communal spaces and facilities. Proper management of multi-owned buildings is underpinned by rules related to health, safety, and security of the residents and visitors. Utilizing Internet of Things (IoT) devices to collect information about the livable space has become a significant trend since the introduction of first smart home appliances back in 2000. The question about who owns the IoT generated data and under what terms it can be shared with others is still unclear. IoT devices, such as security camera and occupancy sensors, can provide safety for their owners, while these devices may capture private data from the neighborhood. In fact, the residents are sometimes not aware of regulations that can prevent them from installing and collecting data from shared spaces that could breach other individuals’ privacy. On the other hand, Building Information Modelling (BIM) provides a rich 3D digital data environment to manage the physical, functional, and ownership aspects of buildings over their entire lifecycle. This study aims to propose a methodology to utilize BIM for defining the legal ownership of the IoT generated data. A case study has been used to discuss key challenges related to the ownership of IoT data in a multi-owned building. This study confirmed that BIM environment can facilitate the understanding of legal ownership of IoT datasets and supports the interpretation of who has the entitlement to use the IoT datasets in multi-owned buildings
-
ItemControl Strategies in Multi-Zone Air Conditioning Systems(MDPI AG, 2019-02-01)In a commercial building, a significant amount of energy is used by the ventilation systems to condition the air for the indoor environments to satisfy the required quantity (temperature and humidity) and quality (amount of fresh air). For many years, Variable Air Volume (VAV) systems have been considered as the most efficient solutions by balancing the airflow volume based on the demand making them energy efficient when compared with the traditional Constant Air Volume (CAV) systems. However, the setpoints in VAV systems are often misread by the sensors due to stratification and formation of pollutant pockets and responding to design levels that overestimate the real-time demand conditions, which result in waste of energy, thermal discomfort and unhealthy air. In general, VAV devices are expensive, complicated and prone to failures and they are used only in medium and large projects. More recently, new technologies have evolved to solve this issue. In one of the new solutions, VAV motors terminals are replaced with flaps which are simpler and less expensive thus, they can be implemented in a wider range of projects. In systems, balancing and supplying the optimal airflow to reduce the energy consumption while delivering ideal thermal and Indoor Air Quality (IAQ) levels are the main challenges. In this paper, a comparison of the recent technologies with traditional VAV systems is presented to be used as a guild line for researchers and designers in the field of Heating Ventilation Air Conditioning (HVAC)
-
ItemA review of Net Zero Energy Buildings with reflections on the Australian context(Elsevier, 2018-01-01)A Net Zero Energy Building (NZEB) is a term, subject to ambiguity, that could be used to describe a building with characteristics such as equal energy generation to usage, significantly reduced energy demands, energy costs equalling zero or net zero greenhouse gas (GHG) emissions. Despite lacking an authoritative definition of NZEBs, this relatively new emerging concept in Australia provides significant opportunities to reduce GHG emissions, energy usage and operational energy costs for buildings owners. This paper aims to explore the existing NZEB models, assess the progression of NZEB literature, identify key policies encouraging NZEB development and recognise potential areas of NZEB research.
-
ItemBenchmarking Energy Management Schemes Among Facilities managers in Australia(Niche Digital, 2017-09-01)