Infrastructure Engineering - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 30
-
ItemRequirements of a data storage infrastructure for effective land administration systems: case study of Victoria, Australia(TAYLOR & FRANCIS LTD, 2022-01-27)Land administration systems are being modernised to streamline the cadastral data lodgement. However, in many jurisdictions, cadastral data are still stored as a flat file. This method of data storage has significant limitations in terms of effective access, management, query, and analysis of cadastral data. Therefore, this study elicited the requirements and proposed an approach to automate the cadastral data storage. The proposed approach was successfully implemented within the land registry organisation in Victoria, Australia and the database management system was rigorously tested. The outcomes can potentially contribute to the implementation of a similar data storage infrastructure in other jurisdictions.
-
ItemNo Preview AvailableUnderstanding the Characteristics of Pedestrians when Passing Obstacles of Different Sizes: An Experimental Study(Forschungszentrum Julich, Zentralbibliothek, 2021-10-03)The aim of this study is to understand the collective movements of individuals and to observe how individuals interact within a physical environment in a crowd dynamic, which has drawn the attention of many researchers. We conducted an experimental study to observe interactions in the collective motions of people and to identify characteristics of pedestrians when passing obstacles of different sizes (bar-shaped, 1.2 m, 2.4 m, 3.6 m and 4.8 m), going through one narrow exit and employing three different flow rates in walking and running conditions. According to the results of our study, there were no differences in collision-avoidance behaviour of pedestrians when walking or running. The pedestrians reacted early to the obstacles and changed the direction in which they were walking by quickly turning to the left or to the right. In terms of the speed of the pedestrians, the average velocity was significantly affected while performing these tasks, decreasing as the size of the obstacle increased; therefore, the size of obstacles will affect flow and speed levels. Travel time was shorter when participants were in the medium-flow rate experiments. In terms of the distance of each individual’s travel, our data showed that there was no significant difference in all the flow rate experiments for both speed levels. Our results also show that when the pedestrians crossed an obstacle, the lateral distance averaged from 0.3 m to 0.7 m, depending on the flow rate and speed level. We then explored how the body sways behaved while avoiding obstacles. It is observed that the average sway of the body was less in the high-speed conditions compared to the low-speed conditions – except for the HF & 4.8 m experiment. These results are expected to provide an insight into the characteristics of the behaviour of pedestrians when avoiding objects, and this could help enhance agent-based models.
-
ItemBuilding Information Modeling (BIM) for Construction and Demolition Waste Management in Australia: A Research Agenda(MDPI, 2021-12-01)Construction and demolition waste (C&DW) contribute to approximately 30% of the total waste generation worldwide, by which heterogeneous ecological impacts, such as resource depletion, global warming, and land degradation, are engendered. Despite ongoing research efforts to minimize construction waste via the Building Information Modeling (BIM)-aided design, there is a paucity of research on integrating BIM in demolition waste management (DWM). This study investigates prominent barriers and future research directions toward the wider adoption of BIM in C&DWM by conducting a systematic literature review. First, this study identifies the barriers that hinder the implementation of C&DWM in Australia; then, it explores the benefits and challenges of leveraging BIM applications for C&DWM. The findings suggest that, for existing buildings without up-to-date design drawings, it is imperative to improve the accuracy of data capturing and object recognition techniques to overcome the bottlenecks of BIM-DWM integration. Moreover, the development of regional-oriented material banks and their harmonization with life cycle assessment databases can extend the potential of BIM-based sustainability analysis, making it applicable to the DWM domain. This study proposes a research agenda on tackling these challenges to realize BIM’s full potential in facilitating DWM.
-
Item
-
ItemNo Preview AvailableINVERSE MODEL USING LAND AND PROPERTYSUB-SYSTEMS FOR PLANNING FUTURE CITIES: A GENERAL FRAMEWORK(CICADIT, University of Bucharest, 2022-01-01)This paper suggests, based on literature review, the use of the inverse model coupled with land and property systems to support urban decision-making. The inverse model is to be used for planning decisions today to achieve the desired tomorrow. This approach has been used previously in urban planning with a property system. The use of a property system alone is insufficient in dealing with the complexity of urban systems. Complex systems are made up of sub-systems that interact with each other; the integration of two sub-systems offers a first and simple alternative to address the complexity of urban systems. We suggest the use of two parametric approaches, logistic regression and house price, to model land and property sub-systems, respectively. Finally, we stress that further studies are needed to integrate the inverse model with other statistical techniques that also deal with complexity, such as cellular automata (CA) or agent-based models.
-
ItemROOM-BASED ENERGY DEMAND CLASSIFICATION of BIM DATA USING GRAPH SUPERVISED LEARNING(Copernicus GmbH, 2021-10-07)Abstract. Nowadays, cities and buildings are increasingly interconnected with new modern data models like the 3D city model and Building Information Modelling (BIM) for urban management. In the past decades, BIM appears to have been primarily used for visualization. However, BIM has been recently used for a wide range of applications, especially in Building Energy Consumption Estimation (BECE). Despite extensive research, BIM is less used in BECE data-driven approaches due to its complexity in the data model and incompatibility with machine learning algorithms. Therefore, this paper highlights the potential opportunity to apply graph-based learning algorithms (e.g., GraphSAGE) using the enriched semantic, geometry, and room topology information extracted from BIM data. The preliminary results are demonstrated a promising avenue for BECE analysis in both pre-construction step (design) and post-construction step like retrofitting processes.
-
ItemRemote Sensing and Meteorological Data Fusion in Predicting Bushfire Severity: A Case Study from Victoria, Australia(MDPI AG, 2022-04-01)The extent and severity of bushfires in a landscape are largely governed by meteorological conditions. An accurate understanding of the interactions of meteorological variables and fire behaviour in the landscape is very complex, yet possible. In exploring such understanding, we used 2693 high-confidence active fire points recorded by a Moderate Resolution Imaging Spectroradiometer (MODIS) sensor for nine different bushfires that occurred in Victoria between 1 January 2009 and 31 March 2009. These fires include the Black Saturday Bushfires of 7 February 2009, one of the worst bushfires in Australian history. For each fire point, 62 different meteorological parameters of bushfire time were extracted from Bureau of Meteorology Atmospheric high-resolution Regional Reanalysis for Australia (BARRA) data. These remote sensing and meteorological datasets were fused and further processed in assessing their relative importance using four different tree-based ensemble machine learning models, namely, Random Forest (RF), Fuzzy Forest (FF), Boosted Regression Tree (BRT), and Extreme Gradient Boosting (XGBoost). Google Earth Engine (GEE) and Landsat images were used in deriving the response variable–Relative Difference Normalised Burn Ratio (RdNBR), which was selected by comparing its performance against Difference Normalised Burn Ratio (dNBR). Our findings demonstrate that the FF algorithm utilising the Weighted Gene Coexpression Network Analysis (WGCNA) method has the best predictive performance of 96.50%, assessed against 10-fold cross-validation. The result shows that the relative influence of the variables on bushfire severity is in the following order: (1) soil moisture, (2) soil temperature, (3) air pressure, (4) air temperature, (5) vertical wind, and (6) relative humidity. This highlights the importance of soil meteorology in bushfire severity analysis, often excluded in bushfire severity research. Further, this study provides a scientific basis for choosing a subset of meteorological variables for bushfire severity prediction depending on their relative importance. The optimal subset of high-ranked variables is extremely useful in constructing simplified and computationally efficient surrogate models, which can be particularly useful for the rapid assessment of bushfire severity for operational bushfire management and effective mitigation efforts.
-
ItemDevelopment of an LADM-based Conceptual Data Model for 3D Underground Land Administration in Victoria(International Federation of Surveyors (FIG), 2022)Currently, many cities around the world use underground space for different applications such as tunnels, utility networks, parking, walkways, and shopping malls. Due to the increasing use of underground areas, management of this space is very important for decision-makers and stakeholders. A 3D Underground Land Administration (ULA) data model has an underpinning role in the management of spatial and semantic information of underground physical structures (physical aspects) as well as the ownership attributes and the extent of legal spaces in underground (legal aspects). Current data models focus on either physical or legal aspects and are mostly based on 2D approaches. The Land Administration Domain Model (LADM), as an ISO standard (ISO 19152), is a prominent legal 3D model adopted for land administration. Several studies and countries have used this data model for land administration purposes. However, LADM has not been fully implemented for modelling underground assets. In addition, it does not consider the physical aspects of underground objects. Physical structures have significant roles in defining the ownership extent of underground assets in some jurisdictions such as Victoria, Australia. On the other hand, LADM-based data models developed by different studies are based on the current requirements and legislative of different jurisdictions. Although these solutions can be helpful, a comprehensive underground data model customised for Victoria is needed. This research aims to develop an LADM-based conceptual data model for 3D ULA to enable integrated management of underground assets by interlinking legal and physical aspects. It is based on the requirements and legislative of Victoria jurisdiction. These requirements include underground legal objects and boundaries and underground physical objects. The data model developed in this study is one of the first and crucial steps to enable 3D digital management of underground rights, restrictions and responsibilities (RRRs) in Victoria.
-
ItemEvaluation of the International 3D Geospatial Data Models and IFC Standard for Implementing an LADM-based 3D Digital Cadastre(International Federation of Surveyors (FIG), 2022)Land Administration Domain Model (LADM) is an international standard for defining both semantic and spatial information connected with rights, restrictions, and responsibilities (RRRs) that affect land, water, built assets, natural resources, underground spaces, and airspaces. Since LADM is currently a conceptual land administration model, one of the main goals for the new version of this standard is to develop technical encodings. These technical encodings would be useful for adopting the LADM in different applications related to land administration. Therefore, the conceptual schema of LADM standard can be implemented in different and varying ways depending on the implementation requirements. The aim of this paper is to evaluate current standards used widely in the domains of geospatial information systems (GIS) and building information modelling (BIM) in terms of their capabilities to serve as an LADM-based technical encoding for 3D digital cadastre implementation. Some of these standards are CityGML, Industry Foundation Classes (IFC), IndoorGML, and LandInfra/InfraGML. There should be a specific use case for each implementation model or technical encoding. For example, a BIM-based implementation of the LADM standard can be useful for 3D digital lodgement of cadastral data when dealing with individual building and property subdivisions. LADM data encoded within a BIM model would be useful during planning, certification, and registration of a new complex subdivision, especially within built environments. In addition, LanInfra/InfraGML can provide another encoding option for 3D digital land registration. More specifically, LanfInfra/InfraGML supports surveying elements which are not well supported in IFC, CityGML and IndoorGML standards. Another option is CityGML technical encoding that can be effective for producing 3D digital property maps for an entire jurisdiction. Current property maps only depict 2D land parcels and ignore spatial and ownership dimensions of vertically placed assets, such as apartments, tunnels, subterranean retail malls, car parks, and utility networks. Developing a CityGML encoding for LADM would be considered a significant milestone towards realising 3D property maps that can provide a fully-integrated representation of underground and aboveground RRRs. Finally, IndoorGML is also another technical encoding which may not an appropriate option for 3D digital cadastre, but it can enable the use of LADM data for lawful indoor navigation. The main contribution of this study is to identify the possible technical encodings for the LADM standard and how various spatial and semantic entities within each encoding can be used to model the equivalent concepts defined in the LADM standard. This would provide guidelines for implementing the conceptual model of LADM using a specific 3D geospatial or BIM standard.
-
ItemUsing open data to detect the structure and pattern of informal settlements: an outset to support inclusive SDGs' achievement(TAYLOR & FRANCIS LTD, 2021-09-20)