Infrastructure Engineering - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 17
-
ItemNo Preview AvailableOptimized Bridge Maintenance Strategies: A System Reliability-Based Approach to Enhancing Road Network Performance(ASCE-AMER SOC CIVIL ENGINEERS, 2024-03-01)
-
ItemNo Preview AvailableThe impact of osteoporosis and diabetes on fracture healing under different loading conditions(ELSEVIER IRELAND LTD, 2024-02)BACKGROUND: Osteoporosis and diabetes are two prevalent conditions among the elderly population. Each of these conditions can profoundly influence the fracture healing process by disturbing the associated inflammatory process. However, the combined effects of osteoporosis and diabetes on fracture healing remain unclear. Therefore, the purpose of the present study is to investigate the role of osteoporosis and diabetes in fracture healing and the underlying mechanisms by developing numerical models. METHOD: This study introduces a numerical model that consists of a three-dimensional model of a tibia fracture stabilized by a Locking Compression Plate (LCP), coupled with a two-dimensional axisymmetric model which illustrates the transport and reactions of cells and cytokines throughout the inflammatory phase in early fracture healing. First, the model parameters were calibrated using available experimental data. The model was then implemented to predict the healing outcomes of fractures under five varied conditions, consisting of both osteoporotic and non-osteoporotic bones, each subjected to different physiological loads. RESULTS: The instability of the fracture callus can significantly escalate in osteoporotic fractures (e.g., when a 150 N physiological load is applied, the unstable region of the osteoporotic fracture callus can reach 26 %, in contrast to 12 % in non-osteoporotic fractures). Additionally, the mesenchymal stem cells (MSCs) proliferation and differentiation can be disrupted in osteoporotic fracture compared to non-osteoporotic fractures (e.g., on the 10th day post-fracture, the decrease in the concentration of MSCs, osteoblasts, and chondrocytes in osteoporotic fractures is nearly double that in non-osteoporotic fractures under a 150 N). Finally, the healing process of fractures can suffer significant impairment when osteoporosis coexists with diabetes (e.g., the concentration of MSCs can be drastically reduced by nearly 37 % in osteoporotic fractures under diabetic conditions when subjected to a load of 200 N) CONCLUSIONS: Fracture calluses destabilized by osteoporosis can negatively affect the fracture healing process by disrupting the proliferation and differentiation of mesenchymal stem cells (MSCs). Moreover, when osteoporosis coexists with diabetes, the fracture healing process can severely impair the fracture healing outcomes.
-
ItemNo Preview AvailableDevelopment of numerical model-based machine learning algorithms for different healing stages of distal radius fracture healing(ELSEVIER IRELAND LTD, 2023-05)BACKGROUND AND OBJECTIVES: Early therapeutic exercises are vital for the healing of distal radius fractures (DRFs) treated with the volar locking plate. However, current development of rehabilitation plans using computational simulation is normally time-consuming and requires high computational power. Thus, there is a clear need for developing machine learning (ML) based algorithms that are easy for end-users to implement in daily clinical practice. The purpose of the present study is to develop optimal ML algorithms for designing effective DRF physiotherapy programs at different stages of healing. METHOD: First, a three-dimensional computational model for the healing of DRF was developed by integrating mechano-regulated cell differentiation, tissue formation and angiogenesis. The model is capable of predicting time-dependant healing outcomes based on different physiologically relevant loading conditions, fracture geometries, gap sizes, and healing time. After being validated using available clinical data, the developed computational model was implemented to generate a total of 3600 clinical data for training the ML models. Finally, the optimal ML algorithm for each healing stage was identified. RESULTS: The selection of the optimal ML algorithm depends on the healing stage. The results from this study show that cubic support vector machine (SVM) has the best performance in predicting the healing outcomes at the early stage of healing, while trilayered ANN outperforms other ML algorithms in the late stage of healing. The outcomes from the developed optimal ML algorithms indicate that Smith fractures with medium gap sizes could enhance the healing of DRF by inducing larger cartilaginous callus, while Colles fractures with large gap sizes may lead to delayed healing by bringing excessive fibrous tissues. CONCLUSIONS: ML represents a promising approach for developing efficient and effective patient-specific rehabilitation strategies. However, ML algorithms at different healing stages need to be carefully chosen before being implemented in clinical applications.
-
ItemChanges in joint lubrication with the degree of meniscectomy and osteochondral junction integrity(Elsevier BV, 2023-11)This study focuses on the relationship between meniscectomy and osteochondral junction health, and their integrity on cartilage lubrication. Using a previously published multi-component joint computational model, we explored the impact of increasing degree of meniscectomy and osteochondral flow conductivity on joint lubrication. Results suggest a greater effect of meniscectomy on joint lubrication when the osteochondral junction is healthy. However, the impact is less pronounced when the osteochondral junction is already diseased due to compromised lubrication capability. This research provides a first-time quantitative analysis of this interaction, which highlights the importance of adequately evaluating the osteochondral junction’s condition before meniscectomy surgery. It also suggests that reducing post-surgery activity level may be beneficial for patients with diseased junctions undergoing meniscectomy.
-
ItemNo Preview AvailableInfluences of variability and uncertainty in vertical and horizontal surface roughness on articular cartilage lubrication(PERGAMON-ELSEVIER SCIENCE LTD, 2022-09)BACKGROUND AND OBJECTIVES: Cartilage surface roughness has significant implications on joint lubrication. However, the effects of the variability in surface roughness in different directions (especially in horizontal direction) in mixed-mode lubrication have not been fully investigated and relevant research work in this field is limited. This study presents a probabilistic numerical approach to investigate the influence of variability and uncertainty of Root-Mean-Square (RMS) roughness heights (vertical roughness) and roughness correlation lengths (horizontal roughness) on cartilage lubrication. METHODS: The synthetic surface topographies with typical ranges of vertical and horizontal roughness characteristics were firstly input to a coupled cartilage contact model. A response surface was then constructed using the input roughness parameters and the output coefficient of friction (CoF). Finally, a large number of independent or correlated roughness samples were generated for computing the probability of mixed-mode lubrication failure (PoF), which was defined as CoF > 0.27 (corresponding to a 90% loss of fluid support in the contact interface). RESULTS: Both independent RMS roughness heights and correlation lengths are correlated positively with CoF. This indicates that the increase of the vertical surface roughness could exacerbate cartilage wear, whereas increasing surface roughness in horizontal direction (i.e., reducing correlation lengths) could retain gap fluid that aids mixed-mode lubrication. Importantly, it shows that CoF is dominant by RMS roughness height. The uncertainty in the independent correlation lengths may lead to the underestimation of PoF. By simulating osteoarthritic surface roughness with a strong correlation between RMS roughness heights and correlation lengths, the value of PoF could reach 70-99%. CONCLUSION: This study highlights the significance of incorporating the mutual relations between the surface roughness in vertical and horizontal directions into research, and the findings could potentially contribute to the design of biomimetic cartilage surfaces for the treatment of osteoarthritis.
-
ItemOsteochondral junction leakage and cartilage joint lubrication(ELSEVIER IRELAND LTD, 2023-03)BACKGROUND AND OBJECTIVES: Previous studies have shown that there is potentially interstitial fluid exchange between cartilage tissue and the subarticular spongiosa region in the case of injury or disease (e.g., osteoarthritis and osteoporosis). Interstitial flow is also required for cartilage lubrication under joint load. A key question then is how cartilage lubrication is modified by increased interstitial fluid leakage across the osteochondral junction. Thus, the purpose of this study is to develop a numerical model to investigate changes in cartilage lubrication with changes in osteochondral junction leakage. METHODS: The multi-phase coupled model includes domains corresponding to the contact gap, cartilage tissue and subchondral bone plate region (ScBP). Each of these domains are treated as poroelastic systems, with their coupling implemented through mass and pressure continuity. The effects of osteochondral junction leakage on lubrication were investigated with a parametric study on the relative permeability between the ScBP and cartilage tissue. RESULTS: Significant effects of ScBP permeability were predicted, especially during the early stage of the junction leakage development (early stage of the disease). There is a significant reduction in mixed-mode lubrication duration under the effect of increased junction leakage (the cartilage tissue mixed-mode lubrication duration is about 33% decrease for a relative permeability ratio of 0.1 between ScBP and cartilage tissue, and about 52% decrease under the osteoarthritis condition). In addition, the time for cartilage to reach steady-state consolidation is significantly reduced when ScBP permeability increases (the consolidation time reduces from roughly 2 h to 1.2 h when the relative permeability ratio increases from 0.001 to 0.1, and it reduces to 0.8 h for an advanced osteoarthritis condition). It is predicted that the initial friction coefficient could increase by over 60% when the ScBP permeability is consistent with an advanced osteoarthritis (OA) condition. CONCLUSION: Increased osteochondral junction leakage induced by joint injury and disease could result in increased cartilage surface wear rates due to more rapid interstitial fluid depressurization within articular cartilage.
-
ItemInfrared thermography detection of delamination in bottom of concrete bridge decks(JOHN WILEY & SONS LTD, 2022-03)Infrared thermography (IRT) has been widely used in detecting the subsurface delamination of bridge deck. However, IRT inspection on delamination zones of the bridge deck which have limited exposure to direct solar radiation (e.g., the bottom surface of the bridge deck) is rather challenging due to the relatively low thermal contrast (∆T) development in these zones. Therefore, the purpose of this study is to conduct a series of experimental studies in conjunction with numerical modeling for investigating the effectiveness of IRT in delamination detection of bridge deck components which are normally not exposed to direct solar radiation. Specially, the effects of different environmental conditions, thickness of bridge deck, and defect characteristics on the absolute thermal contrast (∆T) development were systematically investigated. The results show that IRT can effectively detect the subsurface delamination of concrete bridge deck located in regions that are not exposed to the direct solar radiation. In addition, the development of detectable thermal contrast (>0.5°C) is much dependent on the rate of change in ambient temperature with a suitable detection period between 8 am and 4 pm. Furthermore, it shows that the value of ∆T increases with the increase of bridge deck thickness and delamination size.
-
ItemA Simplified Methodology for Condition Assessment of Bridge Bearings Using Vibration Based Structural Health Monitoring Techniques(WORLD SCIENTIFIC PUBL CO PTE LTD, 2021-09-01)The mechanical properties of bridge bearings gradually deteriorate over time resulting from daily traffic loading and harsh environmental conditions. However, structural health monitoring of in-service bridge bearings is rather challenging. This study presents a bridge bearing condition assessment framework which integrates the vibration data from a non-contact interferometric radar (i.e. IBIS-S) and a simplified analytical model. Using two existing concrete bridges in Australia as a case study, it demonstrates that the developed framework has the capability of detecting the structural condition of the bridge bearings in real-time. In addition, the results from a series of parametric studies show that the effectiveness of the developed framework is largely determined by the stiffness ratio between bridge bearing and girder ([Formula: see text], i.e. the structural condition of the bearings can only be effectively captured when the value of [Formula: see text] ranges from 1/100 and 100.
-
ItemLife-cycle modelling of concrete cracking and reinforcement corrosion in concrete bridges: A case study(Elsevier BV, 2021-06-15)The development of effective life cycle management strategies for transport infrastructure assets is of importance for meeting the defined public policies and levels of service. In the last decades, much progress has been made in assessing the life-cycle performance of bridges using reliability-based approaches. However, the goal of developing a comprehensive life-cycle performance assessment framework for bridges has not been fully achieved. This is due to the uncertainties surrounding model parameters as well as the correlation between these parameters (e.g. the complex correlation between the reinforcement corrosion and the concrete cracking). It becomes more challenging due to the limited access to bridge inspection data by bridge research communities resulting from confidentiality issues. Using a typical highway concrete bridge as a case study, the present study systematically investigated the impact of concrete crack induced reinforcement corrosion on the serviceability of concrete bridges by developing an engineering reliability-based approach involving an auto-regressive crack propagation model and a steel corrosion prediction model. The model parameters were calibrated using the eight-year inspection data of an operating bridge. The influence of different external environments in the reinforcement corrosion, ultimately the residual life of the bridges, was also investigated through conducting a series of parametric studies. Based on the collected bridge inspection data, the model results predict that, although the surface crack of a RC bridge is repairable through periodic maintenance, the corrosion of the steel bars in the bridge still continues over time with a corrosion rate which depends on different maintenance intervention cycle periods (Tcycle). For example, reducing Tcycle from 12 years to 4 years could potentially prolong the service life of the bridge by around 15 years. The developed model could assist bridge managers to estimate the optimal Tcycle to prolong the service life of bridges.
-
ItemThe investigation of bone fracture healing under intramembranous and endochondral ossification(ELSEVIER, 2021-06)After trauma, fractured bone starts healing directly through bone union or indirectly through callus formation process. Intramembranous and endochondral ossification are two commonly known mechanisms of indirect healing. The present study investigated the bone fracture healing under intramembranous and endochondral ossification by developing theoretical models in conjunction with performing a series of animal experiments. Using experimentally determined mean bone densities in sheep tibia stabilized by the Locking Compression Plate (LCP) fixation system, the research outcomes showed that intramembranous and endochondral ossification can be described by Hill Function with two unique sets of function parameters in mechanical stimuli mediated fracture healing. Two different thresholds exist within the range of mechanical simulation index which could trigger significant intramembranous and endochondral ossification, with a relatively higher bone formation rate of endochondral ossification than that of intramembranous ossification. Furthermore, the increase of flexibility of the LCP system and the use of titanium LCP could potentially promote uniform bone formation across the fracture gap, ultimately better healing outcomes.