Infrastructure Engineering - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 16
-
ItemNo Preview AvailableFire safety performance of 3D GFRP nanocomposite as a cladding material(ELSEVIER SCI LTD, 2022-10)Vertical fire spread along highly flammable claddings is a major safety issue for buildings. In this project, a potential new type of cladding material, 3D Glass Fibre Reinforced Polymer (3D GFRP) with improved thermal stability, and fire performance is developed. 3D GFRP nanocomposite samples were fabricated with different percentages of Sepiolite (Sep), Sepiolite-phosphate (SepP), Ammonium Polyphosphate (APP) flame retardant, and 3D glass fabrics. Synthesis of SepP, dispersion analysis of nanoparticles, and manufacturing process have been studied. The characterisation of materials was conducted using Scanning Electron Microscopy, Helium Ion Microscopy, Transmission Electron Microscopy, Thermogravimetric Analysis (TGA), and X-ray Diffraction Analysis. The thermal stability and fire behaviour of the 3D GFRP nanocomposite was studied via TGA and cone calorimeter test. TGA results showed that the optimum amount of additives that improved the thermal stability is 15% flame retardants. Results of cone calorimeter tests showed that different percentages of APP, Sep, and SepP decreased the peak of the heat release rate between 4% and 42%. Also, the effects of APP flame retardant in improving thermal and fire reaction properties were more than Sep and SepP. The test results of 3D GFRP nanocomposite also showed a prospective cladding that can benefit the construction industry in near future.
-
ItemNo Preview AvailableEmergency(Australian Institute of Refrigeration, Air Conditioning and Heating (AIRAH), 2022-10-31)As part of the i-Hub project, masters-level architectural and engineering students from the University of Melbourne, industry consultants, university academics, and Ambulance Victoria staff embraced the challenge of designing net zero emergency response stations. The university’s Brendon McNiven; Lu Aye, F.AIRAH; and Dominik Holzer discuss.
-
ItemNo Preview AvailableUpcycling opportunities and potential markets for aluminium composite panels with polyethylene core (ACP-PE) cladding materials in Australia: A review(ELSEVIER SCI LTD, 2022-11-28)Many buildings worldwide have high fire-risk materials as part of their cladding. As governments in Australia strive to make buildings safer, it is expected that a large volume of end-of-life dangerous cladding will be replaced with safer materials. This high volume of hazardous materials might be upcycled into value-added products. This article presents a systematic market analysis and literature review in identifying current and potential uses for the raw materials used in hazardous ACP-PE cladding. The most promising areas were identified to be non-food-contact packaging (US$228 M p.a.), non-pressure pipes (US$30 M p.a.), footwear (US$5.29 M p.a.) and 3D printer filament (US$2.73 M p.a.)
-
ItemEffects of Working from Home on Greenhouse Gas Emissions and the Associated Energy Costs in Six Australian Cities(MDPI, 2022-04)Working from home (WFH) has been imposed due to the COVID-19 pandemic. The adoption of WFH impacts energy use in the residential, commercial, and transportation sectors. Consequently, this affects the greenhouse gas emission (GHGE) and the associated energy costs to workers and employers. This study estimates the effects of WFH on the GHGE and energy-related costs in the residential, commercial, and transportation sectors. A simple linear model was used to estimate the changes in the GHGEs and cost by a typical employee when WFH practice is adopted for 1.5 and 4 days per week. The adoption of WFH reduces the operational GHGE accounted for commercial buildings and transport. However, it increases the operational GHGE accounted for residential buildings, which is a maximum of about 6% and 12%, respectively, for WFH 1.5 and 4 days. The reduction of GHGE from transport is significantly higher than that of residential buildings. The GHGE reductions from the transport sector are about 30% and 80%, respectively, for WFH 1.5 days and 4 days per week. WFH for 1.5 and 4 days per week reduces the national annual GHGE by about 1.21 Mt CO2-e and 5.76 Mt CO2-e, respectively. Further, the annual transportation cost of an employee is reduced by 30% and 80% in each city when the employee WFH for 1.5 and 4 days per week. The outcomes of this study offer a direction to reduce energy consumption and related costs and potential future research avenues on this topic. Further, the findings also help policymakers develop a hybrid work model for the post-COVID-19 pandemic.
-
ItemNo Preview AvailableEffects of learning curve models on onshore wind and solar PV cost developments in the USA(PERGAMON-ELSEVIER SCIENCE LTD, 2022-05)Technological innovation planning for developing and deploying clean energy technologies plays a key role in reducing greenhouse gas emissions and transition to a low-carbon future. Learning curve theory has been adopted as a common framework for exploring the relationship between endogenous technological learning and technology cost developments. The aim of this article is to analyse the effects of selecting different learning curve approaches (i.e. model formulations) to describe energy technology cost changes over time. Experience and knowledge stock are chosen as the sources of learning to be considered. A new definition of experience was developed to account for the interaction between global and local experience. The new definition of experience also accounts for learning sub-processes (i.e. learning-by-doing, learning-by-using, and experience spillovers) to estimate total experience gained through technology deployment. An integrative model is developed for estimating the effects of learning-by-deploying and learning-by-researching on cost developments for onshore wind and solar PV in the USA. Publicly available data from government departments and organisations were utilised. It was found that technology cost developments are better explained when: (1) experience is defined as a function of global and local experience; (2) knowledge stock is also considered in the model formulation; and (3) technological processes affect only a fraction of the total capital cost. The findings suggested that the application of learning rates for model-based energy planning is context-dependent and how technological factors are explicitly defined may have significantly different policy implications (i.e. different technology costs predictions based on alternative model formulations).
-
ItemFostering integrated design in an academic environment: Process and a method(Vilnius Gediminas Technical University Press, 2022-02-02)In conventional building design projects architects make pre-design and conceptual design decisions on buildings and hand these down to structural and building services engineers to follow up with design development. It is well known that the conceptual design stage of a project is the point where decisions make the most impact, and changes can be made at least cost. The sustainability and innovation aspects of projects often suffer in this respect. One way of addressing this is through Integrated Design Methods that set out mobilise the full potential of all design disciplines on a project by getting them to work effectively together. This method involves architect, engineers, contractors, and owners/clients in all design phases. The current literature reported fundamental principles and processes of Integrated Design however current industry practices do not fully embrace them. Introducing integrated design studios into university pedagogies is a key step in addressing this. Reports on methods of setting up integrated design studios in a university context are however rare. The aim of this article is to develop and document the underlying settings for such design studios. The principles and best practices for applying integrated design are identified. A specific framework of settings in university context is developed and the justifications presented. This article may be of value for the industry and universities to setup integrated design studios to better foster integrated design education.
-
ItemDesigning Post COVID-19 Buildings: Approaches for Achieving Healthy Buildings(MDPI AG, 2022-01-12)The COVID-19 pandemic forced the accessibility, social gathering, lifestyle, and working environment to be changed to reduce the infection. Coronavirus spreads between people in several different ways. Small liquid particles (aerosols, respiratory droplets) from an infected person are transmitted through air and surfaces that are in contact with humans. Reducing transmission through modified heating, ventilation, and air conditioning (HVAC) systems and building design are potential solutions. A comprehensive review of the engineering control preventive measures to mitigate COVID-19 spread, healthy building design, and material was carried out. The current state-of-the-art engineering control preventive measures presented include ultraviolet germicidal irradiation (UVGI), bipolar ionization, vertical gardening, and indoor plants. They have potential to improve the indoor air quality. In addition, this article presents building design with materials (e.g., copper alloys, anti-microbial paintings) and smart technologies (e.g., automation, voice control, and artificial intelligence-based facial recognition) to mitigate the infections of communicable diseases.
-
ItemLessons Learned from PCM Embedded Radiant Chilled Ceiling Experiments in Melbourne(Elsevier, 2022-06)Buildings are responsible for over a third of energy consumption worldwide, particularly for the increasing demand of air-conditioners in response to the more extreme heat around the globe. It is imperative to move towards more energy-efficient space cooling alternatives. The integration of phase change material (PCM) with a radiant chilled ceiling (RCC) is a promising technology due to its benefits regarding energy efficiency and indoor environmental quality. This article presents a field study conducted on a newly-developed PCM embedded radiant chilled ceiling (PCM-RCC) installed in a stand-alone cabin located in Melbourne. The study evaluates the thermal and energy performance of the system through investigation of the transient thermal behaviour of PCM panels in charging-discharging cycles, the indoor comfort conditions, and the electricity peak demand. It was observed that the proposed PCM-RCC can provide satisfactory comfort conditions and contribute to load shifting if a refined operating strategy is applied. The efficiency of PCM recharge overnight depends on several factors that need to be carefully considered in design. The challenges related to the implementation of optimal operating dynamic schedules in response to the thermal behaviour of PCM-RCC, and accurate weather forecasting should be addressed to realise the full potential of this technology.
-
ItemAirborne and impact sound performance of modern lightweight timber buildings in the Australian construction industry(Elsevier BV, 2021-12)Timber usage in the Australian construction industry has significantly increased due to its strength, aesthetic properties and extended allowances recently introduced in building codes. However, issues with acoustic performance of lightweight timber buildings were reported due to their inherit product variability and varying construction methods. This article reviews the recent literature on the transmissions of impact and airborne sounds, flanking transmission of timber buildings, and the state of computer prediction tools with reference to the Australian practice. An in-depth analysis of issues and an objective discussion related to acoustic performance of timber buildings are presented. Timber is a lightweight material and shows low airborne sound resistance in low frequency range. Attenuation of sound transmission with addition of mass, layer isolation, different products like cross-laminated timber and prefabrication are discussed. Challenges in measuring sound transmissions and reproducibility of results in low frequency ranges are discussed. Well-defined measurement protocols and refined computer simulation methods are required. The serviceability design criteria for modern lightweight timber applications in Australia need to be re-evaluated in the area of impact generated sound. Developing computer tools to predict airborne and impact sound transmission in lightweight timber buildings is quite challenging as several components such as timber members and complex connections with varying stiffnesses are non-homogeneous by nature. Further, there is a lack of experimentally validated and computationally efficient tools to predict the sound transmission in timber buildings. Computer prediction tools need to be developed with a focus on mid-frequency transmission over flanks and low-frequency transmission of timber and prefabricated buildings.
-
ItemSensitivity analysis on energy performance, thermal and visual discomfort of a prefabricated house in six climate zones in Australia(ELSEVIER SCI LTD, 2021-09-15)In prefabricated buildings distinctive construction process and lightweight components affect design strategies and consequences. Therefore, to create more sustainable prefabricated buildings, it is important to understand the effects of their envelope parameters on energy performance and indoor environmental quality. Although previous research have investigated the effects of envelope on energy and indoor comfort outputs, the parameters of lightweight prefabricated envelope are not thoroughly considered. This article quantifies the effects of building envelope parameters on the energy use, thermal comfort and daylighting levels of a prefabricated house built in Australia. A building simulation model was developed and validated by comparing predicted with measured indoor temperatures of the house. The baseline performance for evaluation of energy consumption, thermal discomfort hours and daylight unsatisfied hours were carried out using Transient System Simulation (TRNSYS) tool. Series of regression-based sensitivity analyses (SAs) to identify the most sensitive parameters were conducted by coupling TRNSYS, jEPlus and SimLab. Applications in six climate zones were investigated. The important focus areas found by SA in each climate and their corresponding design responses can be applied across ranges of prefabricated building projects if built in similar climatic conditions. SA results revealed window glazing and shading among the most influential parameters on all targeted performance outputs. The relationship between sensitivity levels to energy consumption and degree days indicated that the type of window has a higher impact on the reduction of energy use in the cooling dominated climates while insulation of wall was found a more effective strategy in heating-dominated climates.