Infrastructure Engineering - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 423
-
ItemNo Preview Available
-
ItemIntegrating sustainability into higher education curricula(Engineers Australia, 2021)Education has been widely recognised as a key instrument to achieve sustainability. Integrating sustainability knowledge, skills and values are considered paramount to enable individuals to contribute to sustainable development. The paper presents a pilot study conducted at the University of Melbourne to investigate the links between the subjects offered by the University and sustainability. The pilot study is a part of the Sustainability in the Curriculum program, which addresses the Sustainability Plan Teaching and Learning Target 1, aimed to incorporate sustainability knowledge and values in the University's curricula. The 17 Sustainability Development Goals have been used as a framework to measure how well the curricula are linked to sustainability. A study first undertaken to establish the link between subjects and the Sustainability Development Goals is presented. The study involved data collection through published literature on Sustainable Development Goals and the University's subject handbook, followed by a survey involving the subject coordinators. The findings of the study show that the strength of linkages between subjects with sustainability varies, highlighting the challenge in some technical subjects in linking their contents with sustainability. Approaches adopted in the Faculty of Engineering and Information Technology in embedding sustainability in the curriculum are presented with some examples and discussions for the next steps.
-
ItemEnergy Efficient Time Synchronization in WSN for Critical Infrastructure Monitoring(SPRINGER-VERLAG BERLIN, 2011-01-01)Wireless Sensor Networks (WSN) based Structural Health Monitoring (SHM) is becoming popular in analyzing the life of critical infrastructure such as bridges on a continuous basis. For most of the applications, data aggregation requires high sampling rate. A need for accurate time synchronization in the order of 0.6 − 9 μs every few minutes is necessary for data collection and analysis. Two-stage energy-efficient time synchronization is proposed in this paper. Firstly, the network is divided into clusters and a head node is elected using Low-Energy Adaptive Clustering Hierarchy based algorithm. Later, multiple packets of different lengths are used to estimate the delay between the elected head and the entire network hierarchically at different levels. Algorithmic scheme limits error to 3-hop worst case synchronization error. Unlike earlier energy-efficient time synchronization schemes, the achieved results increase the lifetime of the network.
-
ItemA novel approach for 3D neighbourhood analysis(Copernicus GmbH, 2017-09-12)Abstract. Population growth and lack of land in urban areas have caused massive developments such as high rises and underground infrastructures. Land authorities in the international context recognizes 3D cadastres as a solution to efficiently manage these developments in complex cities. Although a 2D cadastre does not efficiently register these developments, it is currently being used in many jurisdictions for registering land and property information. Limitations in analysis and presentation are considered as examples of such limitations. 3D neighbourhood analysis by automatically finding 3D spaces has become an issue of major interest in recent years. Whereas the neighbourhood analysis has been in the focus of research, the idea of 3D neighbourhood analysis has rarely been addressed in 3 dimensional information systems (3D GIS) analysis. In this paper, a novel approach for 3D neighbourhood analysis has been proposed by recording spatial and descriptive information of the apartment units and easements. This approach uses the coordinates of the subject apartment unit to find the neighbour spaces. By considering a buffer around the edges of the unit, neighbour spaces are accurately detected. This method was implemented in ESRI ArcScene and three case studies were defined to test the efficiency of this approach. The results show that spaces are accurately detected in various complex scenarios. This approach can also be applied for other applications such as property management and disaster management in order to find the affected apartments around a defined space.
-
ItemNo Preview Available
-
ItemApplications of phase change materials in concrete for sustainable built environment: a review(ICSECM 2011, 2011)The fast economic development around the globe and high standards of living imposes an ever increasing demand for energy. As a prime consumer of world‟s material and energy resources building and construction industry has a great potential in developing new efficient and environmentally friendly materials to reduce energy consumptions in buildings. Thermal energy storage systems (TES) with Phase change materials (PCM) offer attractive means of improving the thermal mass and the thermal comfort within a building. PCMs are latent heat thermal storage (LHTS) materials with high energy storage density compared to conventional sensible heat storage materials. Concrete incorporating PCM improves the thermal mass of the building which reduces the space conditioning energy consumption and extreme temperature fluctuations within the building. The heat capacity and high density of concrete coupled with latent heat storage of PCM provides a novel energy saving concepts for sustainable built environment. Microencapsulation is a latest and advanced technology for incorporation of PCM in to concrete which creates finely dispersed PCMs with high surface area for greater amount of heat transfer. This paper reviews available literature on Phase change materials in concrete, its application and numerical modelling of composite concrete. However most of the existing TES systems have been explored with wallboards and plaster materials and comparatively a few researches have been done on TES systems using cementitious materials. Thus, there is a need for comprehensive experimental and analytical investigations on PCM applications with cementitious materials as the most widely used construction materials in buildings.
-
ItemApplication of nanomaterials in the sustainable built environment(University of Moratuwa, 2010)Nanotechnology is widely regarded as one of the twenty-first century’s key technologies, and its economic importance is sharply on the rise. In the construction industry, nanomaterials has potentials that are already usable today, especially the functional characteristics such as increased tensile strength, self-cleaning capacity, fire resistance, and additives based on nano materials make common materials lighter, more permeable, and more resistant to wear. Nanomaterial are also considered extremely useful for roofs and facades in the built environment. They also expand design possibilities for interior and exterior rooms and spaces. Nano–insulating materials open up new possibilities for ecologically oriented sustainable infrastructure development. It has been demonstrated that nanotechnology has invented products with many unique characteristics which could significantly provide solutions current construction issues and may change the requirement and organization of construction process. This paper examines and documents applicable nanotechnology based products that can improve the sustainable development and overall competitiveness of the construction industry.
-
ItemApplication of nano insulation materials in the sustainable built environment(University of Moratuwa, 2010)Nanotechnology is widely being used in the built environment for its advantages in many improved engineering properties of the nano materials. Nano insulating materials open up new possibilities for ecologically oriented sustainable infrastructure development. The most widely used nano material in built environment is for the purpose of insulation to improve the energy efficiency namely in the buildings and dwellings. Nanotechnology has now provided an effective and affordable means to increase energy efficiency in pre-existing buildings as well as new construction by increasing thermal resistance. The major advantage of nano insulation materials is its benefit of translucent coatings which increase the thermal envelope of a building without reducing the square footage. The intrinsic property of nano insulating material is it can be applied to windows to reduce heat transfer from solar radiation due it its thermal resistant property and the translucent property allows diffusing of day light. The nano insulating material has significant advantage in reducing the operational energy aspects of buildings due to its valuable insulating properties. This paper examines applicable nanotechnology based products that can improve the sustainable development and overall competitiveness of the building industry. The areas of applying nano insulating material in building industry will be mainly focused on the building envelope. The paper also examines the potential advantages of using nanotechnology based insulating material in reducing the life cycle energy, reduction of material usage and enhancing the useable life span. The paper also investigates the operational energy by simulation methodology and compares the reduction of operational energy consumption.
-
Item3D CITYLUR: MODELLING 3D CITY LAND-USE REGULATIONS to SUPPORT ISSUING A PLANNING PERMIT(ISPRS, 2021-10-07)The applications and understanding of Land-use Regulations (LuR) are more communicable when they are linked to the digital representation of the physical world. In order to support issuing a planning permit and move towards the establishment of automated planning permit checks, this paper investigates how LuRs related to a planning permit process can be modelled in 3D called 3D CityLuR. 3D CityLuR serves as a 3D model for representing LuRs' legal extents on a city scale. It is formed based on multiple geometric modelling approaches representing LuRs, which can provide a better cognitive understanding of LuRs and subsequently facilitate LuR automatic checks. To this purpose, according to LuRs' descriptions and characteristics explained in related planning documents, key parameters representing LuRs' extent are identified (e.g. maximum distance in overlooking or maximum allowed height in building height regulations). Accordingly, to automatically model each LuR, a geometric modelling approach (e.g. Boundary Representation (B-Rep), CSG, and extrusion) that best fits with the identified key parameters is proposed. In addition, to combine 3D CityLuR with an integrated BIM-GIS environment, the level of information need in terms of geometries and semantics is specified. Finally, the paper results in a showcase for five LuRs including building height, energy efficiency protection, overshadowing open space, overlooking, and noise impacts regulations. The showcase is a proof of concept for determining how these LuRs can be modelled in 3D and combined with 3D city models based on the selected geometric modelling approaches, identified parameters, and level of information need.
-
ItemNo Preview AvailableA multi-layered energy resilience framework and metrics for energy master planning of communities: A university campus case study(Society of Risk Analysis, 2021-12-05)