Mechanical Engineering - Research Publications

Permanent URI for this collection

Search Results

Now showing 1 - 10 of 694
  • Item
    No Preview Available
    Analysis of Logistics 4.0 service quality and its sustainability enabler scenarios in emerging economy
    Balouei Jamkhaneh, H ; Shahin, R ; Tortorella, GL (Elsevier BV, 2022-07)
  • Item
    No Preview Available
    A novel systematic numerical approach on determination of heat source parameters in welding process
    Moslemi, N ; Gohari, S ; Abdi, B ; Sudin, I ; Ghandvar, H ; Redzuan, N ; Hassan, S ; Ayob, A ; Rhee, S (Elsevier BV, 2022-05)
  • Item
    No Preview Available
    Navier-Stokes-based linear model for unstably stratified turbulent channel flows
    Madhusudanan, A ; Illingworth, SJ ; Marusic, I ; Chung, D (American Physical Society (APS), 2022-04-01)
  • Item
    No Preview Available
    Uncertainty quantification and reduction using sensitivity analysis and Hessian derivatives
    Sánchez, J ; Otto, K (American Society of Mechanical Engineers, 2021-01-01)
    Abstract We study the use of Hessian interaction terms to quickly identify design variables that reduce variability of system performance. To start we quantify the uncertainty and compute the variance decomposition to determine noise variables that contribute most, all at an initial design. Minimizing the uncertainty is next sought, though probabilistic optimization becomes computationally difficult, whether by including distribution parameters as an objective function or through robust design of experiments. Instead, we consider determining the more easily computed Hessian interaction matrix terms of the variance-contributing noise variables and the variables of any proposed design change. We also relate the Hessian term coefficients to subtractions in Sobol indices and reduction in response variance. Design variable changes that can reduce variability are thereby identified quickly as those with large Hessian terms against noise variables. Furthermore, the Jacobian terms of these design changes can indicate which design variables can shift the mean response, to maintain a desired nominal performance target. Using a combination of easily computed Hessian and Jacobian terms, design changes can be proposed to reduce variability while maintaining a targeted nominal. Lastly, we then recompute the uncertainty and variance decomposition at the more robust design configuration to verify the reduction in variability. This workflow therefore makes use of UQ/SA methods and computes design changes that reduce uncertainty with a minimal 4 runs per design change. An example is shown on a Stirling engine design where the top four variance-contributing tolerances are matched with two design changes identified through Hessian terms, and a new design found with 20% less variance.
  • Item
    No Preview Available
  • Item
    No Preview Available
    The wrinkling and buckling of graphene induced by nanotwinned copper matrix: A molecular dynamics study
    Zhang, C ; Lu, C ; Pei, L ; Li, J ; Wang, R (Elsevier BV, 2021-03-01)
  • Item
    No Preview Available
    A blueprint for well-designed, high-performing cloth masks that can outperform a 3-layered surgical mask
    Bhattacharjee, S ; Bahl, P ; de Silva, C ; Doolan, C ; Chughtai, AA ; Heslop, D ; MacIntyre, R (ELSEVIER, 2022-01-01)
  • Item
    No Preview Available
    Micro-mechanical damage of needle puncture on bovine annulus fibrosus fibrils studied using polarization-resolved Second Harmonic Generation (P-SHG) microscopy
    Wang, J-Y ; Mansfield, JC ; Brasselet, S ; Vergari, C ; Meakin, JR ; Winlove, CP (ELSEVIER, 2021-03-21)
    Needle injection has been widely used in spinal therapeutic or diagnostic processes, such as discography. The use of needles has been suspected in causing mild disc degeneration which can lead to long-term back pain. However, the localised microscopic damage caused by needles has not been well studied. The local progressive damage on a microscopic level caused by needle punctures on the surface of bovine annulus fibrosus was investigated. Four different sizes of needle were used for the puncture and twenty-nine bovine intervertebral discs were studied. Polarization-resolved second harmonic generation and fluorescent microscopy were used to study the local microscopic structural changes in collagen and cell nuclei due to needle damage. Repeated 70 cyclic loadings at ±5% of axial strain were applied after the needle puncture in order to assess progressive damage caused by the needle. Puncture damage on annulus fibrosus were observed either collagen fibre bundles being pushed aside, being cut through or combination of both with part being lift or pushed in. The progressive damage was found less relevant to the needle size and more progressive damage was only observed using the larger needle. Two distinct populations of collagen, in which one was relatively more organised than the other population, were observed especially after the puncture from skewed distribution of polarization-SHG analysis. Cell shape was found rounder near the puncture site where collagen fibres were damaged.
  • Item
    No Preview Available
    Rising and Sinking in Resonance: Mass Distribution Critically Affects Buoyancy-Driven Spheres via Rotational Dynamics
    Will, JB ; Krug, D (AMER PHYSICAL SOC, 2021-04-30)
    We present experimental results for spherical particles rising and settling in a still fluid. Imposing a well-controlled center of mass offset enables us to vary the rotational dynamics selectively by introducing an intrinsic rotational timescale to the problem. Results are highly sensitive even to small degrees of offset, rendering this a practically relevant parameter by itself. We further find that, for a certain ratio of the rotational to a vortex shedding timescale (capturing a Froude-type similarity), a resonance phenomenon sets in. Even though this is a rotational effect in origin, it also strongly affects translational oscillation frequency and amplitude, and most importantly, the drag coefficient. This observation equally applies to both heavy and light spheres, albeit with slightly different characteristics for which we offer an explanation. Our findings highlight the need to consider rotational parameters when trying to understand and classify path properties of rising and settling spheres.
  • Item
    No Preview Available
    Coverage control of mobile sensor networks with directional sensing
    Ju, Z ; Zhang, H ; Tan, Y ; Chen, X (AMER INST MATHEMATICAL SCIENCES-AIMS, 2022-01-01)
    Control design of mobile sensors for coverage problem is addressed in this paper. The mobile sensors have non-linear dynamics and directional sensing properties which mean the sensing performance is also affected by the pointing directions of the sensors. Different from the standard optimal coverage problem where sensors are assumed to be omni-directional ones, orientation angles of the directional sensors should also be controlled, other than the position control, to achieve the coverage purpose. Considering also the non-linear dynamics of the mobile sensors, new control methodology is necessarily developed for the coverage problem with directional sensors. In the approach proposed, an innovative gradient based non-smooth motion controller is designed for the mobile sensors with unicycle dynamics. With the proposed controllers, the states of sensors will always stay in an positive invariant set where the gradient of the performance valuation function is well-defined if they are initialized within this set. Moreover, the sensors' states are proved to converge to some critical point where the gradient is zero. Simulation results are provided to illustrate the performance of the proposed coverage control strategy.