Mechanical Engineering - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 51
-
Item
-
ItemFrequency set selection for multi-frequency steady-state visual evoked potential-based brain-computer interfaces(FRONTIERS MEDIA SA, 2022-12-21)OBJECTIVE: Multi-frequency steady-state visual evoked potential (SSVEP) stimulation and decoding methods enable the representation of a large number of visual targets in brain-computer interfaces (BCIs). However, unlike traditional single-frequency SSVEP, multi-frequency SSVEP is not yet widely used. One of the key reasons is that the redundancy in the input options requires an additional selection process to define an effective set of frequencies for the interface. This study investigates systematic frequency set selection methods. METHODS: An optimization strategy based on the analysis of the frequency components in the resulting multi-frequency SSVEP is proposed, investigated and compared to existing methods, which are constructed based on the analysis of the stimulation (input) signals. We hypothesized that minimizing the occurrence of common sums in the multi-frequency SSVEP improves the performance of the interface, and that selection by pairs further increases the accuracy compared to selection by frequencies. An experiment with 12 participants was conducted to validate the hypotheses. RESULTS: Our results demonstrated a statistically significant improvement in decoding accuracy with the proposed optimization strategy based on multi-frequency SSVEP features compared to conventional techniques. Both hypotheses were validated by the experiments. CONCLUSION: Performing selection by pairs and minimizing the number of common sums in selection by pairs are effective ways to select suitable frequency sets that improve multi-frequency SSVEP-based BCI accuracies. SIGNIFICANCE: This study provides guidance on frequency set selection in multi-frequency SSVEP. The proposed method in this study shows significant improvement in BCI performance (decoding accuracy) compared to existing methods in the literature.
-
ItemTechnology-assisted assessment of spasticity: a systematic review(BMC, 2022-12-09)BACKGROUND: Spasticity is defined as "a motor disorder characterised by a velocity dependent increase in tonic stretch reflexes (muscle tone) with exaggerated tendon jerks". It is a highly prevalent condition following stroke and other neurological conditions. Clinical assessment of spasticity relies predominantly on manual, non-instrumented, clinical scales. Technology based solutions have been developed in the last decades to offer more specific, sensitive and accurate alternatives but no consensus exists on these different approaches. METHOD: A systematic review of literature of technology-based methods aiming at the assessment of spasticity was performed. The approaches taken in the studies were classified based on the method used as well as their outcome measures. The psychometric properties and usability of the methods and outcome measures reported were evaluated. RESULTS: 124 studies were included in the analysis. 78 different outcome measures were identified, among which seven were used in more than 10 different studies each. The different methods rely on a wide range of different equipment (from robotic systems to simple goniometers) affecting their cost and usability. Studies equivalently applied to the lower and upper limbs (48% and 52%, respectively). A majority of studies applied to a stroke population (N = 79). More than half the papers did not report thoroughly the psychometric properties of the measures. Analysis identified that only 54 studies used measures specific to spasticity. Repeatability and discriminant validity were found to be of good quality in respectively 25 and 42 studies but were most often not evaluated (N = 95 and N = 78). Clinical validity was commonly assessed only against clinical scales (N = 33). Sensitivity of the measure was assessed in only three studies. CONCLUSION: The development of a large diversity of assessment approaches appears to be done at the expense of their careful evaluation. Still, among the well validated approaches, the ones based on manual stretching and measuring a muscle activity reaction and the ones leveraging controlled stretches while isolating the stretch-reflex torque component appear as the two promising practical alternatives to clinical scales. These methods should be further evaluated, including on their sensitivity, to fully inform on their potential.
-
ItemPromoting clinical best practice in a user-centred design study of an upper limb rehabilitation robot(Taylor & Francis, 2021-01-01)Purpose: Despite their promise to increase therapy intensity in neurorehabilitation, robotic devices have not yet seen mainstream adoption. Whilst there are a number of contributing factors, it is obvious that the treating clinician should have a clear understanding of the objectives and limitations of robotic device use. This study sought to explore how devices can be developed to support a clinician in providing clinical best practice. Methods and Materials: A user-centred design study of a robotic device was conducted, involving build-then-use iterations, where successive iterations are built based on feedback from the use cycle. This work reports results of an analysis of qualitative and quantitative data describing the use of the robotic device in the clinical sessions, and from a focus group with the treating clinicians. Results and Conclusions: The data indicated that use of the device did not result in patient goal-setting and may have resulted in poor movement quality. Therapists expected a higher level of autonomy from the robotic device, and this may have contributed to the above problems. These problems can and should be addressed through modification of both the study design and device to provide more explicit instructions to promote clinical best practice. Implications for Rehabilitation: • Encouraging clinical best practice when using evaluating prototype devices within a clinical setting is important to ensure that best practice is maintained - and can be achieved through both study and device design • Support from device developers can significantly improve the confidence of therapists during the use of that device in rehabilitation, particularly with new or prototype devices • End effector-based robotic devices for rehabilitation show potential for a wide variety of patient presentations and capabilities.
-
ItemEvaluating Rehabilitation Progress Using Motion Features Identified by Machine Learning(IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2021-04)Evaluating progress throughout a patient's rehabilitation episode is critical for determining the effectiveness of the selected treatments and is an essential ingredient in personalised and evidence-based rehabilitation practice. The evaluation process is complex due to the inherently large human variations in motor recovery and the limitations of commonly used clinical measurement tools. Information recorded during a robot-assisted rehabilitation process can provide an effective means to continuously quantitatively assess movement performance and rehabilitation progress. However, selecting appropriate motion features for rehabilitation evaluation has always been challenging. This paper exploits unsupervised feature learning techniques to reduce the complexity of building the evaluation model of patients' progress. A new feature learning technique is developed to select the most significant features from a large amount of kinematic features measured from robotics, providing clinically useful information to health practitioners with reduction of modeling complexity. A novel indicator that uses monotonicity and trendability is proposed to evaluate kinematic features. The data used to develop the feature selection technique consist of kinematic data from robot-aided rehabilitation for a population of stroke patients. The selected kinematic features allow for human variations across a population of patients as well as over the sequence of rehabilitation sessions. The study is based on data records pertaining to 41 stroke patients using three different robot assisted exercises for upper limb rehabilitation. Consistent with the literature, the results indicate that features based on movement smoothness are the best measures among 17 kinematic features suitable to evaluate rehabilitation progress.
-
ItemNo Preview AvailableCoverage control of mobile sensor networks with directional sensing(AMER INST MATHEMATICAL SCIENCES-AIMS, 2022)Control design of mobile sensors for coverage problem is addressed in this paper. The mobile sensors have non-linear dynamics and directional sensing properties which mean the sensing performance is also affected by the pointing directions of the sensors. Different from the standard optimal coverage problem where sensors are assumed to be omni-directional ones, orientation angles of the directional sensors should also be controlled, other than the position control, to achieve the coverage purpose. Considering also the non-linear dynamics of the mobile sensors, new control methodology is necessarily developed for the coverage problem with directional sensors. In the approach proposed, an innovative gradient based non-smooth motion controller is designed for the mobile sensors with unicycle dynamics. With the proposed controllers, the states of sensors will always stay in an positive invariant set where the gradient of the performance valuation function is well-defined if they are initialized within this set. Moreover, the sensors' states are proved to converge to some critical point where the gradient is zero. Simulation results are provided to illustrate the performance of the proposed coverage control strategy.
-
ItemFlexible mechanical metamaterials enabling soft tactile sensors with multiple sensitivities at multiple force sensing ranges(NATURE PORTFOLIO, 2021-12-16)The majority of existing tactile sensors are designed to measure a particular range of force with a fixed sensitivity. However, some applications require tactile sensors with multiple task-relevant sensitivities at multiple ranges of force sensing. Inspired by the human tactile sensing capability, this paper proposes a novel soft tactile sensor based on mechanical metamaterials which exhibits multiple sensitivity regimes due to the step-by-step locking behaviour of its heterogenous multi-layered structure. By tuning the geometrical design parameters of the collapsible layers, each layer experiences locking behaviour under different ranges of force which provides different sensitivity of the sensor at different force magnitude. The integration of a magnetic-based transduction method with the proposed structure results in high design degrees of freedom for realising the desired contact force sensitivities and corresponding force sensing ranges. A systematic design procedure is proposed to select appropriate design parameters to produce the desired characteristics. Two example designs of the sensor structure were fabricated using widely available benchtop 3D printers and tested for their performance. The results showed the capability of the sensor in providing the desired characteristics in terms of sensitivity and force range and being realised in different shapes, sizes and number of layers in a single structure. The proposed multi-sensitivity soft tactile sensor has a great potential to be used in a wide variety of applications where different sensitivities of force measurement is required at different ranges of force magnitudes, from robotic manipulation and human-machine interaction to biomedical engineering and health-monitoring.
-
ItemStability and Persistent Excitation in Signal Sets(IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2015-05)Persistent excitation (PE) conditions have been widely used to analyze stability properties of various parameter identification algorithms and to establish uniform global asymptotic stability (UGAS) for a large class of nonlinear time-varying systems. In order to generalize such conditions to a more general setting, a new PE condition is proposed with three basic ingredients: a signal set to represent a family of time functions (e.g., trajectories); a pseudo distance measure to describe the convergence; and some binary relations (e.g., state-to-output relations). Closely related to detectability, this PE condition is a necessary condition to guarantee UGAS. Under uniform global stability and an integral inequality, it becomes a sufficient condition of UGAS. A novel concept: M-pair, which aims at simplifying the checking of the PE condition, is introduced. By using M-pair, it is possible to simplify the structure of the referred signal set (in the spirit of the classic Krasovskii-LaSalle theorem) and to extend the dimension of the reference signal set (similar to the Matrosov theorem). Thus, the framework of M-pair not only unifies these well-known results, but also generates more flexibility in checking the PE conditions. When applied to nonlinear switched systems, three new tools to verify the PE condition are obtained. Finally, an example illustrates that a nonlinear time-varying switched system with arbitrary switching can be shown to be UGAS without using a common Lyapunov function.
-
ItemMulti-agent source seeking via discrete-time extremum seeking control(PERGAMON-ELSEVIER SCIENCE LTD, 2014-09)Recent developments in extremum seeking theory have established a general framework for the methodology, although the specific implementations, particularly in the context of multi-agent systems, have not been demonstrated. In this work, a group of sensor-enabled vehicles is used in the context of the extremum seeking problem using both local and global optimisation algorithms to locate the extremum of an unknown scalar field distribution. For the former, the extremum seeker exploits estimates of gradients of the field from local dithering sensor measurements collected by the mobile agents. It is assumed that a distributed coordination which ensures uniform asymptotic stability with respect to a prescribed formation of the agents is employed. An inherent advantage of the frameworks is that a broad range of nonlinear programming algorithms can be combined with a wide class of cooperative control laws to perform extreme source seeking. Semi-global practical asymptotically stable convergence to local extrema is established in the presence of field sampling noise. Subsequently, global extremum seeking with multiple agents is investigated and shown to give rise to robust practical convergence whose speed can be improved via computational parallelism. Nonconvex field distributions with local extrema can be accommodated within this global framework.
-
ItemUnified frameworks for sampled-data extremum seeking control: Global optimisation and multi-unit systems(PERGAMON-ELSEVIER SCIENCE LTD, 2013-09)Two frameworks are proposed for extremum seeking of general nonlinear plants based on a sampled-data control law, within which a broad class of nonlinear programming methods is accommodated. It is established that under some generic assumptions, semi-global practical convergence to a global extremum can be achieved. In the case where the extremum seeking algorithm satisfies a stronger asymptotic stability property, the converging sequence is also shown to be stable using a trajectory-based proof, as opposed to a Lyapunov-function- type approach. The former is more straightforward and insightful. This allows for more general optimisation algorithms than considered in existing literature, such as those which do not admit a state-update realisation and/or Lyapunov functions. Lying at the heart of the analysis throughout is robustness of the optimisation algorithms to additive perturbations of the objective function. Multi-unit extremum seeking is also investigated with the objective of accelerating the speed of convergence.