Mechanical Engineering - Research Publications
Permanent URI for this collection
Search Results
1 - 3 of 3
-
ItemSimultaneous orthogonal-plane particle image velocimetry measurements in a turbulent boundary layer(Cambridge University Press, 2006)Stereoscopic particle image velocimetry (PIV) measurements were taken simultaneously in streamwise–spanwise and streamwise–wall-normal planes in a zero pressure-gradient turbulent boundary layer over a flat plate. Polarization techniques were employed to allow PIV to be taken in both planes simultaneously. Image preprocessing techniques were used to improve the quality of data near the line of intersection of the planes. Linear stochastic estimation was performed on these data, revealing the streamwise, spanwise, and wall-normal extent of swirl events primarily near the top of the log region of the boundary layer. Swirl events with rotation consistent with the mean vorticity are found to have a large footprint inthe lower limit of the log region whereas swirls with opposite-signed vorticity are found to have little influence lower in the boundary layer. These long-time-averaged statistics contain features that are consistent with the hairpin packet model (or its kinematic equivalent). This model also seems to provide a reasonable description of many instantaneous events involving large-scale coherence, where long regions of streamwise momentum deficit are surrounded by vortex cores.
-
ItemExperimental investigation of vortex properties in a turbulent boundary layer(American Institute of Physics, 2006)Dual-plane particle image velocimetry experiments were performed in a turbulent boundary layer with Ret =1160 to obtain all components of the velocity gradient tensor. Wall-normal locations in the logarithmic and wake region were examined. The availability of the complete gradient tensor facilitates improved identification of vortex cores and determination of their orientation and size. Inclination angles of vortex cores were computed using statistical tools such as two-point correlations and joint probability density functions. Also, a vortex identification technique was employed to identify individual cores and to compute inclination angles directly from instantaneous fields. The results reveal broad distributions of inclination angles at both locations. The results are consistent with the presence of many hairpin vortices which are most frequently inclined downstream at an angle of 45 degrees with the wall. According to the probability density functions, a relatively small percentage of cores are inclined upstream. The number density of forward leaning cores decreases from the logarithmic to the outer region while the number density of backward-leaning cores remains relatively constant. These trends, together with the correlation statistics, suggest that the backward-leaning cores are part of smaller, weaker structures that have been distorted and convected by larger, predominantly forward-leaning eddies associated with the local shear.
-
ItemAssessment of dual plane PIV measurements in wall turbulence using DNS data(Springer Verlag, 2006)Experimental dual plane particle image velocimetry (PIV) data are assessed using direct numerical simulation (DNS) data of a similar flow with the aim of studying the effect of averaging within the interrogation window. The primary reason for the use of dual plane PIV is that the entire velocity gradient tensor and hence the full vorticity vector can be obtained. One limitation of PIV is the limit on dynamic range, while DNS is typically limited by the Reynolds number of the flow. In this study, the DNS data are resolved more finely than the PIV data, and an averaging scheme is implemented on the DNS data of similar Reynolds number to compare the effects of averaging inherent to the present PIV technique. The effects of averaging on the RMS values of the velocity and vorticity are analyzed in order to estimate the percentage of turbulence intensity and enstrophy captured for a given PIV resolution in turbulent boundary layers. The focus is also to identify vortex core angle distributions, for which the two dimensional and three-dimensional swirl strengths are used. The studies are performed in the logarithmic region of a turbulent boundary layer at z+= 110 from the wall. The dual plane PIV data are measured in a zero pressure gradient flow over a flat plate at Reτ = 1,160, while the DNS data are extr acted from a channel flow at Reτ = 934. Representative plots at various wall-normal locations for the RMS values of velocity and vorticity indicate the attenuation of the variance with increasing filter size. Further, the effect of averaging on the vortex core angle statistics is negligible when compared with the raw DNS data. These results indicate that the present PIV technique is an accurate and reliable method for the purposes of statistical analysis and identification of vortex structures.