School of Historical and Philosophical Studies - Theses
Permanent URI for this collection
Search Results
1 - 4 of 4
-
ItemWorking wood: the state, wood science and industry: Australia, 1918–1949( 2021)This study identified the role of three national forest products laboratories and their relationship with other government agencies and specifically, to the Australian timber industry. The laboratories were established with several objectives, including to reduce the importation of timber, develop industry strategies for the use of Australian timbers, identify the properties of Australian woods and minimise problems for the timber industry. A further aim was to implement ‘national efficiency’ (discussed below). The work of the laboratories was based on a common theme: to encourage industries to understand that by using Australian timber, they would help both the nation and their businesses. A major objective of this thesis is to address the ‘doing’ of science in laboratories in conjunction with industry and government Archives from Australia and the United Kingdom were used. Not all of the archives had been opened which suggested that the thesis filled a gap in the history of the Australian wood science. Libraries were also used in Australia and the United Kingdom. A further methodology identified a ‘Triple helix’ between research, industry and government, which focused on collaboration between three organisations whose goals were to conduct research, to develop research outcomes and increase National efficiency. Archival material exposed the frequency of communications between the laboratories and the secondary timber industry. Six stories provided a broad perspective of the research conducted by the laboratories. Time frames of each chapters partially overlapped. The subjects connected across time, and provided depth to the thesis. Using the helix as the framework, the relationship between the laboratories, industry and the national science organisations was identified as collaboration, conflict, innovation, knowledge transfer and networking.
-
ItemContentious Routes: Ireland Questions, Radical Political Articulations and Settler Ambivalence in (White) Australia, c. 1909 - 1923( 2021)This thesis is a transnational history of the ‘Ireland Question' in the imperial and ethico-political imaginary of radical and labour movements in (‘White’) Australia during the ‘Irish revolutionary period’, broadly conceived. It traces the contestation of 'Ireland' as a political signifier, with attention to its constitutive differences, transnational circuitries, utopian investments, relations of recognition and desire, and articulatory practices. Where previous studies of Irish nationalisms in Australia have deployed 'the nation' as a consensualist category of analysis, this study reinterprets the ‘Ireland Question’ in postnational terms as contentious and within routes. Combining attention to settler-colonial difference with the discursive articulation of political forms, it situates the 'Ireland Question' firstly in relation to the political as a signifier of settler ambivalence, and secondly to politics as a social movement. Drawing on archival research in Australia, Ireland and Britain, it analyses personal papers, letters, political periodicals, state surveillance records, political ephemera and pamphlets. Beyond the 'Ireland Question' in the imperial labour movement, this study affords serious attention to historical dimensions at the hybrid boundaries of ‘long-distance nationalism’ including political travel performances in Ireland, non-nationalist transnational political networks ranging from feminist to socialist connections, and non-Irish political identification with 'Ireland.' It proposes that this unstable play of meanings comprised a heterogeneity of political positions and networks whose convergence during the conjuncture of 1916-1921 was both contingent and politically contested: one that signified in excess of either Australian nationalist historical teleologies or a coherent 'transnational Irish revolution.'
-
ItemIn search of identity : engineering in Australia 1788-1988( 1988)This is the first historical study of the social organisation of engineering in Australia. Engineering education, professional associations, industrial relations, engineering populations and attitudes concerning occupational title, professional recognition and nature of employment are analysed as to their influence upon occupational control and identity. The shared values among engineers concerning occupational identity stem from these factors. The study is not concerned with the technological and resource management functions of engineers. In considering the first of the research questions: 'How has the occupational identity of engineers developed in Australia?', two further questions arise. The second question: 'What have been the influences of the professional associations, engineering education and industrial relations in the development of occupational identity for engineers in Australia?', gives rise to the major historical themes in the study. The analysis goes well beyond the history of engineering education and the engineering associations in addressing the third research question: 'What are the shared values of engineering concerning occupational control and professionalisation, especially in relation to occupational identity?' The study shows that Australian engineers have long been concerned about the identity of their occupation, and that they have developed mechanisms for occupational control that not only depend upon clarity of Identity, but also reinforce it. Early concern about use of 'engineer' by the non-qualified persons caused adoption of the descriptor professional engineer. Concerns about community recognition caused engineers to argue that their education and the importance of their work should attract the prestige accorded to other professions. Believing that they deserve to be ranked high among the professions, engineers sought a commensurate level of income. But engineers predominantly are not independent practitioners, they are employed in teams in organisations, and such concerns existed mainly within the context of employment, requiring the issues of corporate patronage and industrial relations to be addressed. There was little engineering in the Australian colonies until after the gold rushes of the 1850s. The study includes quantitative analyses of the growth of the Australian engineering population from 1850 to gauge of the influence of different modes of formation of engineers in the evolution of shared values. The antecedents of Australian engineering are traced to the beginnings of the occupation in Britain and North America. During the last half-century industrial relations became a major element in the occupational control and identity of Australian engineers, and this factor provides a contrast between the manner in which occupational control, is exercised in Britain and North America. The conclusions are that occupational control in Australia differs from that in Britain and North America, and that, in contrast with those countries, occupational identity has been strongly reinforced in Australia through industrial relations. However, trends indicate possible changes in the future social organisation of Australian engineering, with diminished strength in occupational control mechanisms.
-
ItemJohn Ridley's contributions to Australian technology and to the early progress of South Australia( 1979)This study is primarily concerned with the working career of John Ridley (1806-1887), and with his contributions to the flour-milling industry of South Australia, to wheat harvesting technology, and to the progress of the colony generally. Ridley emigrated to South Australia from the north of England in 1840, and remained there until early 1853. Although still a relatively young man, he then returned to England to live in semi-retirement. The following text will show that Ridley contributed substantially to the technical and economic progress of the young- colony in at least two separate ways :- (i) He built the first flour-mill in South Australia in the year 1840, and subsequently operated it as a very successful business until he left the colony in 1853. The mill was steam-driven, of substantial capacity for the time, and of considerable economic significance to the colony. The local flour-milling industry which grew up soon afterwards freed the colony from crippling expenditures for imported flour and other breadstuffs, thus permitting a sound local economy to be developed. During 1842 Ridley leased a second (inoperative) flourmill near Adelaide, completely refitted it, and brought it too into successful operation. As well as helping to alleviate the financial difficulties of the colony at the time, these two mills provided a timely stimulus to local wheat growing. Ridley exerted a considerable influence upon the early development of South Australia's flour-milling industry, by virtue of the high standards for efficiency, operating reliability, and sound profitability he established in his own businesses. The competitors he attracted were forced to achieve similarly high standards in order to survive. His work was thus of importance in helping to secure a sound base for the future growth of the industry. (ii) In late-1843 Ridley invented, constructed, and demonstrated a unique mechanical harvester for gathering grain crops. This machine, later known as the "Ridley Reaper" or the "South Australian Stripper", was subsequently manufactured and used in thousands within the colony. For more than half a century the machine played a major part in stimulating wheat production in the region by providing the simplest and cheapest harvesting method in the world at that time. Ridley's invention embodied a principle of operation which was entirely novel at the time it was introduced. In the late-nineteenth and early-twentieth centuries this same principle was incorporated into the designs of many other widely used grain harvesters. Ridley's machine therefore occupies an important place in the evolution of modern grain-harvesting machinery. The first two machines (both built by Ridley) were directly responsible for averting a serious harvesting crisis in South Australia at the 1843-44 season. Afterwards, when ever-increasing numbers of the machines went into service, a dramatic expansion of the colony's wheat-growing industry became possible. This in turn led to the development of a large export trade in wheat, and thus to an enviable economic prosperity for the colony. Whilst there is unanimous agreement that Ridley constructed and demonstrated the first successful machine of the "Stripper" type, his claim to have also invented the principle of its operation has been disputed. John Wrathall Full, another. pioneer South Australian settler, insisted that he and not Ridley originated the fundamental principle. In fact, he directly accused Ridley of stealing his idea and putting it into practice. The resulting controversy is examined in detail, and Bull's claim shown to be falsely based. Two further points of historical interest are also made and substantiated. Firstly, the "Stripper" was the first ever harvesting machine to successfully combine the operations of gathering and threshing the grain. And secondly, Ridley's "Stripper" was the first machine in the world to substantially displace hand-methods of cereal harvesting in its region. In the light of all the above considerations, it is suggested that Ridley's machine has not received either fair or sufficient notice in the histories of agricultural technology published to date. John Ridley's importance in the story of the development of mechanical harvesting has thus been unjustly neglected.