School of Chemistry - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 33
-
ItemHighly Efficient Luminescent Solar Concentrators by Selective Alignment of Donor-Emitter Fluorophores(AMER CHEMICAL SOC, 2019-04-23)Vertically aligning fluorophores to the surface of a waveguide is known to be an effective approach to improve the optical quantum efficiency (OQE) of luminescent solar concentrators (LSCs). While the chromophore alignment assists waveguiding of the emitted photons to the LSC edges, it also significantly reduces the light-harvesting properties of the LSC. We report here a fluorophore pair consisting of a sphere-shaped energy donor and a rod-shaped emitter that was incorporated in LSCs to provide selective fluorophore alignment to address the reduced incident-light absorption issue. A liquid-crystal polymer matrix was used to perpendicularly align the rod-shaped acceptors to a favorable orientation for light guiding, while the sphere-shaped donor was randomly oriented to maintain its light-absorbing properties. The OQE of LSC devices with this selectively aligned donor-acceptor fluorophore system is 78% without significant loss of light-harvesting capability.
-
ItemAdditive-Morphology Interplay and Loss Channels in "All-Small-Molecule" Bulk-heterojunction (BHJ) Solar Cells with the Nonfullerene Acceptor IDTTBM(WILEY-V C H VERLAG GMBH, 2018-02-14)Abstract Achieving efficient bulk‐heterojunction (BHJ) solar cells from blends of solution‐processable small‐molecule (SM) donors and acceptors is proved particularly challenging due to the complexity in obtaining a favorable donor–acceptor morphology. In this report, the BHJ device performance pattern of a set of analogous, well‐defined SM donors—DR3TBDTT (DR3), SMPV1, and BTR—used in conjunction with the SM acceptor IDTTBM is examined. Examinations show that the nonfullerene “All‐SM” BHJ solar cells made with DR3 and IDTTBM can achieve power conversion efficiencies (PCEs) of up to ≈4.5% (avg. 4.0%) when the solution‐processing additive 1,8‐diiodooctane (DIO, 0.8% v/v) is used in the blend solutions. The figures of merit of optimized DR3:IDTTBM solar cells contrast with those of “as‐cast” BHJ devices from which only modest PCEs <1% can be achieved. Combining electron energy loss spectrum analyses in scanning transmission electron microscopy mode, carrier transport measurements via “metal‐insulator‐semiconductor carrier extraction” methods, and systematic recombination examinations by light‐dependence and transient photocurrent analyses, it is shown that DIO plays a determining role—establishing a favorable lengthscale for the phase‐separated SM donor–acceptor network and, in turn, improving the balance in hole/electron mobilities and the carrier collection efficiencies overall.
-
ItemReduced Recombination in High Efficiency Molecular Nematic Liquid Crystalline: Fullerene Solar Cells(WILEY-V C H VERLAG GMBH, 2016-11-23)Bimolecular recombination in bulk heterojunction organic solar cells is the process by which nongeminate photogenerated free carriers encounter each other, and combine to form a charge transfer (CT) state which subsequently relaxes to the ground state. It is governed by the diffusion of the slower and faster carriers toward the electron donor–acceptor interface. In an increasing number of systems, the recombination rate constant is measured to be lower than that predicted by Langevin's model for relative Brownian motion and the capture of opposite charges. This study investigates the dynamics of charge generation, transport, and recombination in a nematic liquid crystalline donor:fullerene acceptor system that gives solar cells with initial power conversion efficiencies of >9.5%. Unusually, and advantageously from a manufacturing perspective, these efficiencies are maintained in junctions thicker than 300 nm. Despite finding imbalanced and moderate carrier mobilities in this blend, strongly suppressed bimolecular recombination is observed, which is ≈150 times less than predicted by Langevin theory, or indeed, more recent and advanced models that take into account the domain size and the spatial separation of electrons and holes. The suppressed bimolecular recombination arises from the fact that ground‐state decay of the CT state is significantly slower than dissociation.
-
ItemLiquid Crystallinity as a Self-Assembly Motif for High-Efficiency, Solution-Processed, Solid-State Singlet Fission Materials(WILEY-V C H VERLAG GMBH, 2019-08)Abstract Solution and solution‐deposited thin films of the discotic liquid crystalline electron acceptor–donor–acceptor (A‐D‐A) p‐type organic semiconductor FHBC(TDPP)2, synthesized by coupling thienyl substituted diketopyrrolopyrrole (TDPP) onto a fluorenyl substituted hexa‐peri‐hexabenzocoronene (FHBC) core, are examined by ultrafast and nanosecond transient absorption spectroscopy, and time‐resolved photoluminescence studies to examine their ability to support singlet fission (SF). Grazing incidence wide‐angle X‐ray (GIWAX) studies indicate that as‐cast thin films of FHBC(TDPP)2 are “amorphous,” while hexagonal packed discotic liquid crystalline films evolve during thermal annealing. SF in as‐cast thin films is observed with an ≈150% triplet generation yield. Thermally annealing the thin films improves SF yields up to 170%. The as‐cast thin films show no long‐range order, indicating a new class of SF material where the requirement for local order and strong near neighbor coupling has been removed. Generation of long‐lived triplets (µs) suggests that these materials may also be suitable for inclusion in organic solar cells to enhance performance.
-
ItemSolution-Processable, Solid State Donor-Acceptor Materials for Singlet Fission(WILEY-V C H VERLAG GMBH, 2018-10-25)Abstract The exploitation of singlet fission (SF) materials in optoelectronic devices is restricted by the limited number of SF materials available and developing new organic materials that undergo singlet fission is a significant challenge. Using a new strategy based on conjugating strong donor and acceptor building blocks, the small molecule (BDT(DPP)2) and polymer (p‐BDT‐DPP) systems are designed and synthesized knowing that bisthiophene‐2,5‐dihydropyrrolo[3,4‐c]pyrrole‐1,4‐dione (DPP) has a low lying triplet energy level, which is further confirmed by time‐dependent density functional theory (TD‐DFT) calculations. TD‐DFT and natural transition orbital (NTO) analysis are conducted to gain insight into the photophysical properties and features of excited states in BDT(DPP)2, respectively. Femtosecond and nanosecond transient absorption spectroscopies are used to investigate the excited state kinetics in the synthesized compounds. Fast formation of triplet pairs in thin film of p‐BDT‐DPP and BDT(DPP)2 and the equilibrium formation of correlated triplet pairs and S1 from triplet–triplet annihilation in solution of BDT(DPP)2 are further evidence of SF in these compounds. The short triplet lifetime, as a result of fast biexcitonic recombination, provides additional support for triplet pair formation through singlet fission.
-
ItemBenzotriazole-based donor-acceptor conjugated polymers with a broad absorption in the visible range(ROYAL SOC CHEMISTRY, 2014-02-21)
-
ItemThiazolyl substituted benzodithiophene copolymers: synthesis, properties and photovoltaic applications(Royal Society of Chemistry, 2014)Three new conjugated polymers based on 5-decylthiazol-2-yl substituted benzodithiophene have been synthesized by Stille cross-coupling polymerization. 1,3-Dibromo-5-octylthieno[3,4-c]pyrrole-4,6-dione (M1), 2,5-diethylhexyl-3,6-bis(5-bromothiophen-2-yl)pyrrolo[3,4-c]-pyrrole-1,4-dione (M2) and 4,6-dibromo-thieno[3,4-b]thiophene-2-dodecyl carboxylate (M3) were used as acceptor building blocks for the synthesis of conjugated donor-acceptor polymers. The thermal, optical, electrochemical, and photovoltaic properties of the synthesized polymers were studied.
-
ItemSingle Isomer of Indene-C70 Bisadduct-Isolation and Performance in Bulk Heterojunction Solar Cells(AMER CHEMICAL SOC, 2014-02-25)
-
ItemMorphology Change and Improved Efficiency in Organic Photovoltaics via Hexa-peri-hexabenzocoronene Templates(AMER CHEMICAL SOC, 2014-06-11)The morphology of the active layer in organic photovoltaics (OPVs) is of crucial importance as it greatly influences charge generation and transport. A templating interlayer between the electrode and the active layer can change active layer morphology and influence the domain orientation. A series of amphiphilic interface modifiers (IMs) combining a hydrophilic polyethylene-glycol (PEG) oligomer and a hydrophobic hexabenzocoronene (HBC) were designed to be soluble in PEDOT:PSS solutions, and surface accumulate on drying. These IMs are able to self-assemble in solution. When IMs are deposited on top of a poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) film, they induce a morphology change of the active layer consisting of discotic fluorenyl-substituted HBC (FHBC) and [6,6]-phenyl C61-butyric acid methyl ester (PCBM). However, when only small amounts (0.2 wt %) of IMs are blended into PEDOT:PSS, a profound change of the active layer morphology is also observed. Morphology changes were monitored by grazing incidence wide-angle X-ray scattering (GIWAXS), transmission electron microscopy (TEM), TEM tomography, and low-energy high-angle angular dark-field scanning transmission electron microscopy (HAADF STEM). The interface modification resulted in a 20% enhancement of power conversion efficiency.
-
ItemOrganic Solar Cells Using a High-Molecular-Weight Benzodithiophene-Benzothiadiazole Copolymer with an Efficiency of 9.4%(WILEY-V C H VERLAG GMBH, 2015-01-27)A high molecular weight donor-acceptor conjugated polymer is synthesized using the Suzuki polycondensation method. Using this polymer, a single-junction bulk-heterojunction solar cell is fabricated giving a power conversion efficiency of 9.4% using a fullerene-modified ZnO interlayer at the cathode contact.