School of Chemistry - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 23
-
ItemHighly Efficient Luminescent Solar Concentrators by Selective Alignment of Donor-Emitter Fluorophores(AMER CHEMICAL SOC, 2019-04-23)Vertically aligning fluorophores to the surface of a waveguide is known to be an effective approach to improve the optical quantum efficiency (OQE) of luminescent solar concentrators (LSCs). While the chromophore alignment assists waveguiding of the emitted photons to the LSC edges, it also significantly reduces the light-harvesting properties of the LSC. We report here a fluorophore pair consisting of a sphere-shaped energy donor and a rod-shaped emitter that was incorporated in LSCs to provide selective fluorophore alignment to address the reduced incident-light absorption issue. A liquid-crystal polymer matrix was used to perpendicularly align the rod-shaped acceptors to a favorable orientation for light guiding, while the sphere-shaped donor was randomly oriented to maintain its light-absorbing properties. The OQE of LSC devices with this selectively aligned donor-acceptor fluorophore system is 78% without significant loss of light-harvesting capability.
-
ItemCompetitive Triplet Formation and Recombination in Crystalline Films of Perylenediimide Derivatives: Implications for Singlet Fission(AMER CHEMICAL SOC, 2020-05-28)Developing photostable compounds that undergo quantitative singlet fission (SF) is a key challenge. As SF necessitates electron transfer between neighboring molecules, the SF rate is highly sensitive to intermolecular coupling in the solid state. We investigate SF in thin films for a series of perylenediimide (PDI) molecules. By adding different substituents at the imide positions, the packing of the molecules in the solid state can be changed. The relationship between SF parameters and the stacked geometry in PDI films is investigated, with two-electron direct coupling found to be the main SF mechanism. Time-resolved emission and transient absorption data show that all of the PDI films undergo SF although with different rates and yields varying from 35 to 200%. The results show that PDI1 and 2, which are stacked PDI pairs twisted out of alignment along the highest occupied molecular orbital to lowest unoccupied molecular orbital transition, exhibit faster and more efficient SF up to 200% yield. We demonstrate that both triplet formation and decay rates are highly sensitive to the ordering of the molecules within a film. The results of this study will assist in the design of optimized structures with a fast SF rate and low recombination rate that are required for useful light harvesting applications.
-
ItemFRET-enhanced photoluminescence of perylene diimides by combining molecular aggregation and insulation(Royal Society of Chemistry, 2020-07-14)The photoluminescence quantum yield (ϕPL) of perylene diimide derivatives (PDIs) is often limited by aggregation caused quenching (ACQ) at high concentration or in the neat solid-state. Energy transfer in high dye concentration systems is also a key factor in determining ϕPL as a result of energy funneling to trap sites in the sample. By tuning the substituents, we present two classes of PDIs with aggregation and insulation of the PDI core. By combining these fluorophores in a polymer film, we demonstrate highly emissive samples (85% ϕPL) at high concentration (140 mM or 20% w/w). Experimental and theoretical studies provide insight into why such a combination is necessary to achieve high ϕPL. While insulated fluorophores maintain respectable ϕPL at high concentration, an improved ϕPL can be achieved in the presence of appropriately oriented fluorophore aggregates as emissive traps. The theoretical calculations show that the relative orientation of aggregated monomers can result in energetic separation of localized states from the charge-transfer and bi-excitonic states thereby enabling high ϕPL.
-
ItemLimitations of conjugated polymers as emitters in triplet-triplet annihilation upconversion(ROYAL SOC CHEMISTRY, 2021-11-29)Triplet–triplet annihilation upconversion performances for poly(phenylene-vinylene) emitters were investigated through a series of copolymers with bulky sidechains.
-
ItemTetraphenylethene 9,10-Diphenylanthracene Derivatives - Synthesis and Photophysical Properties(WILEY-V C H VERLAG GMBH, 2019-06)A series of tetraphenylethene 9,10-diphenylanthracene (TPE-DPA) derivatives have been synthesized, and their photophysical properties studied. Photoluminescence measurements in PMMA, neat films and nanoparticle dispersions reveal that different aggregation states are formed, which leads to different photophysical behavior. The triplet excited state properties were studied using Pt(II) octaethylporphyrin (PtOEP) as triplet sensitizer. Upconverted emission from the DPA moiety is observed in nanoparticle dispersions of each derivative. A higher upconverted emission intensity is observed in aerated (compared to deaerated) solutions of the derivatives following irradiation, which is attributed to oxidation of the TPE moiety. These results provide valuable insight for the design of AIE luminogens for triplet-triplet annihilation upconversion (TTA-UC).
-
ItemRevealing the influence of steric bulk on the triplet-triplet annihilation upconversion performance of conjugated polymers(NATURE PORTFOLIO, 2021-10-01)A series of poly(phenylene-vinylene)-based copolymers are synthesized using the Gilch method incorporating monomers with sterically bulky sidechains. The photochemical upconversion performance of these polymers as emitters are investigated using a palladium tetraphenyltetrabenzoporphyrin triplet sensitizer and MEH-PPV as reference. Increased incorporation of sterically bulky monomers leads to a reduction in the upconversion efficiency despite improved photoluminescence quantum yield. A phosphorescence quenching study indicates issues with the energy transfer process between the triplet sensitizer and the copolymers. The best performance with 0.18% upconversion quantum yield is obtained for the copolymer containing 10% monomer with bulky sidechains.
-
ItemOptimising molecular rotors to AIE fluorophores for mitochondria uptake and retention(ROYAL SOC CHEMISTRY, 2020-12-07)Molecular rotors exhibit fluorescence enhancement in a confined environment and thus have been used extensively in biological imaging. However, many molecular rotors suffer from small Stokes shift and self-aggregation caused quenching. In this work, we have synthesised a series of red emissive molecular rotors based on cationic α-cyanostilbene. Profoundly enhanced aggregation-induced emission (AIE) properties and greatly widened Stokes shifts can be achieved by molecular engineering. With specificity to stain mitochondria, we demonstrate a simple approach to achieve cell uptake and retention upon tuning the pyridinium substituent of the dyes.
-
ItemSynthesis and Solvatochromic Behavior of Zwitterionic Donor-Bridge-Acceptor Systems with Oligo(p -phenylene) Spacers(Georg Thieme Verlag KG, 2021-01-15)Oligo(p-phenylene)s with a donor phenol group and an acceptor pyridinium moiety separated by one and two p-phenylene units were synthesized by the linear iterative Suzuki–Miyaura coupling method using aryl nonaflates as effective coupling reagents. Zwitterionic forms of these push–pull molecules were generated upon deprotonation of the phenol leading to large redshifts in absorbance maxima. UV-vis absorbance studies also revealed strong dependence of the band position on solvent polarity: a smooth bathochromic shift can be observed with the decrease of the solvent polarity. The molecule with one p-phenylene bridging unit showed the strongest solvatochromic characteristics in the series, spanning the range of 167 nm while moving from polar water to less polar N,N-dimethylformamide. The magnitude of this shift was close to Reichardt's dye — one of the most solvatochromic organic dyes known.
-
ItemThe performance of conjugated polymers as emitters for triplet-triplet annihilation upconversion(ROYAL SOC CHEMISTRY, 2021-03-21)
Phenylene–ethynylene–anthracene copolymer was used as the emitter in triplet–triplet annihilation upconversion outperforming well-known poly(phenylene–vinylene)s.
-
ItemA Molecular Chameleon for Mapping Subcellular Polarity in an Unfolded Proteome Environment(WILEY-V C H VERLAG GMBH, 2020-06-15)Environmental polarity is an important factor that drives biomolecular interactions to regulate cell function. Herein, a general method of using the fluorogenic probe NTPAN-MI is reported to quantify the subcellular polarity change in response to protein unfolding. NTPAN-MI fluorescence is selectively activated upon labeling unfolded proteins with exposed thiols, thereby reporting on the extent of proteostasis. NTPAN-MI also reveals the collapse of the host proteome caused by influenza A virus infection. The emission profile of NTPAN-MI contains information of the local polarity of the unfolded proteome, which can be resolved through spectral phasor analysis. Under stress conditions that disrupt different checkpoints of protein quality control, distinct patterns of dielectric constant distribution in the cytoplasm can be observed. However, in the nucleus, the unfolded proteome was found to experience a more hydrophilic environment across all the stress conditions, indicating the central role of nucleus in the stress response process.