School of Physics - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 18
-
ItemTuning Single Quantum Dot Emission with a Micromirror(AMER CHEMICAL SOC, 2018-02)The photoluminescence of single quantum dots fluctuates between bright (on) and dark (off) states, also termed fluorescence intermittency or blinking. This blinking limits the performance of quantum dot-based devices such as light-emitting diodes and solar cells. However, the origins of the blinking remain unresolved. Here, we use a movable gold micromirror to determine both the quantum yield of the bright state and the orientation of the excited state dipole of single quantum dots. We observe that the quantum yield of the bright state is close to unity for these single QDs. Furthermore, we also study the effect of a micromirror on blinking, and then evaluate excitation efficiency, biexciton quantum yield, and detection efficiency. The mirror does not modify the off-time statistics, but it does change the density of optical states available to the quantum dot and hence the on times. The duration of the on times can be lengthened due to an increase in the radiative recombination rate.
-
ItemThe Degradation and Blinking of Single CsPbl3 Perovskite Quantum Dots(AMER CHEMICAL SOC, 2018-06-28)We demonstrate using single molecule spectroscopy that inorganic CsPbI3 perovskite quantum dots (PQDs) undergo an irreversible, photoaccelerated reaction with water that results in a blue-shift of the photoluminescence (PL) and ultimately to complete quenching of the emission. We find that decomposition does not take place in the presence of oxygen alone but that it requires light and water. We also analyze the blinking for some stable PQDs and find a continuous distribution of emission states with a linear correlation between intensity and lifetime. We postulate that, in addition to charging and discharging processes, blinking arises from the activation and deactivation of nonradiative recombination centers in the PQDs.
-
ItemA new method to position and functionalize metal-organic framework crystals(NATURE PUBLISHING GROUP, 2011-03)With controlled nanometre-sized pores and surface areas of thousands of square metres per gram, metal-organic frameworks (MOFs) may have an integral role in future catalysis, filtration and sensing applications. In general, for MOF-based device fabrication, well-organized or patterned MOF growth is required, and thus conventional synthetic routes are not suitable. Moreover, to expand their applicability, the introduction of additional functionality into MOFs is desirable. Here, we explore the use of nanostructured poly-hydrate zinc phosphate (α-hopeite) microparticles as nucleation seeds for MOFs that simultaneously address all these issues. Affording spatial control of nucleation and significantly accelerating MOF growth, these α-hopeite microparticles are found to act as nucleation agents both in solution and on solid surfaces. In addition, the introduction of functional nanoparticles (metallic, semiconducting, polymeric) into these nucleating seeds translates directly to the fabrication of functional MOFs suitable for molecular size-selective applications.
-
ItemDipole-field-assisted charge extraction in metal-perovskite-metal back-contact solar cells(NATURE PUBLISHING GROUP, 2017-09-20)Hybrid organic-inorganic halide perovskites are low-cost solution-processable solar cell materials with photovoltaic properties that rival those of crystalline silicon. The perovskite films are typically sandwiched between thin layers of hole and electron transport materials, which efficiently extract photogenerated charges. This affords high-energy conversion efficiencies but results in significant performance and fabrication challenges. Herein we present a simple charge transport layer-free perovskite solar cell, comprising only a perovskite layer with two interdigitated gold back-contacts. Charge extraction is achieved via self-assembled monolayers and their associated dipole fields at the metal-perovskite interface. Photovoltages of ~600 mV generated by self-assembled molecular monolayer modified perovskite solar cells are equivalent to the built-in potential generated by individual dipole layers. Efficient charge extraction results in photocurrents of up to 12.1 mA cm-2 under simulated sunlight, despite a large electrode spacing.Simplified device concepts may become important for the development of low cost photovoltaics. Lin et al. report solar cells based on interdigitated gold back-contacts and metal halide perovskites where charge extraction is assisted via a dipole field generated by self-assembled molecular monolayers.
-
ItemHot-Carrier Organic Synthesis via the Near-Perfect Absorption of Light(AMER CHEMICAL SOC, 2018-11-01)Photocatalysis enables the synthesis of valuable organic compounds by exploiting photons as a chemical reagent. Although light absorption is an intrinsic step, existing approaches rely on poorly absorbing catalysts that require high illumination intensities to afford enhanced efficiencies. Here, we demonstrate that a plasmonic metamaterial capable of near-perfect light absorption (94%) readily catalyzes a model organic reaction with a 29-fold enhancement in conversion relative to controls. The oxidation of benzylamine proceeds via a reactive iminium intermediate with high selectivity at ambient temperature and pressure, using only low-intensity visible irradiation. Control experiments demonstrated that only hot charge carriers produced following photoexcitation facilitate the formation of superoxide radicals, which, in turn, leads to iminium formation. Modeling shows that hot holes with energies that overlap with the highest-occupied molecular orbital (HOMO) of the reactant can participate and initiate the photocatalytic conversion. These results have important implications for hot-carrier photocatalysis and plasmon-hot-carrier extraction.
-
ItemOptical image processing with metasurface dark modes(OPTICAL SOC AMER, 2018-09-01)Here we consider image processing using the optical modes of metasurfaces with an angle-dependent excitation. These spatially dispersive modes can be used to directly manipulate the spatial frequency content of an incident field, suggesting their use as ultra-compact alternatives for analog optical information processing. A general framework for describing the filtering process in terms of the optical transfer functions is provided. In the case where the relevant mode cannot be excited with a normally incident plane wave (a dark mode), high-pass filtering is obtained. We provide examples demonstrating filtering of both amplitude and pure phase objects.
-
ItemSwitchable polarization rotation of visible light using a plasmonic metasurface(AMER INST PHYSICS, 2017-01-01)A metasurface comprising an array of silver nanorods supported by a thin film of the phase change material vanadium dioxide is used to rotate the primary polarization axis of visible light at a pre-determined wavelength. The dimensions of the rods were selected such that, across the two phases of vanadium dioxide, the two lateral localized plasmon resonances (in the plane of the metasurface) occur at the same wavelength. Illumination with linearly polarized light at 45° to the principal axes of the rod metasurface enables excitation of both of these resonances. Modulating the phase of the underlying substrate, we show that it is possible to reversibly switch which axis of the metasurface is resonant at the operating wavelength. Analysis of the resulting Stokes parameters indicates that the orientation of the principal linear polarization axis of the reflected signal is rotated by 90° around these wavelengths. Dynamic metasurfaces such as these have the potential to form the basis of an ultra-compact, low-energy multiplexer or router for an optical signal.
-
ItemMetasurfaces, dark modes, and high NA illumination(OPTICAL SOC AMER, 2018-10-15)The interaction of a focused beam with a metasurface supporting dark modes is investigated. We show computationally and experimentally that the excitation of dark modes is accompanied by characteristic changes in the reflected Fourier spectrum. This spatial frequency filtering capability indicates an avenue for the all-optical, on-chip detection of phase gradients for biological and other imaging techniques.
-
ItemIn-Plane Detection of Guided Surface Plasmons for High-Speed Optoelectronic Integrated Circuits(WILEY, 2018-01)Abstract Constrains on the speed of modern digital integrated circuits are dominated by the metallic interconnects between logic gates. Surface plasmon polaritons have potential to overcome this limitation and greatly increase the operating speed of future digital devices. Nevertheless, an ongoing issue is the compatibility of modern planar microelectronic circuits with current methods for detecting surface plasmons. Here, a new approach to in‐plane surface plasmon polariton detection is proposed and experimentally demonstrated. The design is based on metal–semiconductor–metal photodetectors that are acknowledged as having one of the best speed characteristics among photodetectors. In the design, the photodetector structure also plays a dual role as the outcoupling grating for surface plasmons, significantly reducing the footprint of the resulting device. The technique has the potential to enable the integration of surface plasmons as signal carriers in future high‐speed optoelectronic integrated circuits.
-
ItemBlack Gold: Broadband, High Absorption of Visible Light for Photochemical Systems(WILEY-V C H VERLAG GMBH, 2017-01)Here, a black Au surface is presented: a material solely composed of Au that is capable of absorbing more than 92% of the incident light over a spectral region ranging from 300 to 600 nm and that can maintain a high absorbance (above 70%) for wavelengths up to 800 nm. The black Au surface is fabricated by a simple and scalable template‐assisted physical vapor deposition technique and possesses the flexibility of adhering to any arbitrary substrate. The high absorbance of Au originates from the close packing of high aspect ratio Au nanotubes possessing a random tapered wall thickness. Fabry–Perot resonances of gap‐plasmon modes between the Au nanotubes are also responsible for the strong suppression of reflectance of black Au as demonstrated by finite element method simulations. Furthermore, the ability of this surface to drive photochemical transformations under visible light illumination is demonstrated. Hence, black Au could provide a new paradigm for the use of highly absorbing metal nanostructures to effectively harvest the entire visible spectrum for photorelated applications such as solar fuel production, photodetection, and photovoltaics.