School of Physics - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 37
-
ItemNo Preview AvailableMulticolor detour phase holograms based on an Al plasmonic color filter.(Optica Publishing Group, 2023-01-16)The remarkable advances in nanofabrication that have occurred over the last decade present opportunities for the realization of new types of holograms. In this work, for the first time to the best of our knowledge, a method for phase multicolor holograms based on nanohole arrays is described. The nanoholes are in an aluminum film that is interposed between the glass substrate and a silicon dioxide layer. The nanoholes serve as color filters for blue, green, and red wavelengths and provide the necessary phase distribution via the detour phase method. Our nanohole arrays are optimized to maximize the transmission efficiency of the red, green, and blue channels and to minimize the cross-talk between them. We design two multicolor holograms based on these filters and simulate their performance. The results show good fidelity to the desired holographic images. The proposed structure has the advantages of being very compact, of requiring only a simple fabrication method with one lithography step, and of employing materials (aluminum and silicon dioxide) that are compatible with standard CMOS technology.
-
ItemNo Preview AvailableMid-infrared spectral reconstruction with dielectric metasurfaces and dictionary learning(Optica Publishing Group, 2022-05-15)Mid-infrared (MIR) spectroscopy has numerous industrial applications and is usually performed with Fourier-transform infrared (FTIR) spectrometers. While these work well for many purposes, there is currently much interest in alternative approaches that are smaller and lighter, i.e., MIR microspectrometers. Here we investigate all-dielectric metasurfaces as spectral filters for MIR microspectrometers. Two metasurface types are studied. For the first, we design, fabricate, and test a metasurface with a narrow and angularly tunable transmission stop band. We use it to reconstruct the transmission spectra of various materials. The second metasurface, investigated theoretically, possesses narrow passband features via symmetry-protected bound states in the continuum.
-
ItemNo Preview AvailableGenetic optimization of mid-infrared filters for a machine learning chemical classifier.(Optica Publishing Group, 2022-05-23)Miniaturized mid-infrared spectrometers present opportunities for applications that range from health monitoring to agriculture. One approach combines arrays of spectral filters with infrared photodetectors, called filter-array detector-array (FADA) microspectrometers. A paper recently reported a FADA microspectrometer in tandem with machine learning for chemical identification. In that work, a FADA microspectrometer with 20 filters was assembled and tested. The filters were band-pass, or band-stop designs that evenly spanned the microspectrometer's operating wavelength range. However, given that a machine learning classifier can be trained on an arbitrary filter basis, it is not apparent that evenly spaced filters are optimal. Here, through simulations with noise, we use a genetic algorithm to optimize six bandpass filters to best identify liquid and gaseous chemicals. We report that the classifiers trained with the optimized filter sets outperform those trained with evenly spaced filter sets and those handpicked to target the absorption bands of the chemicals investigated.
-
ItemVisible to Short-Wave Infrared Photodetectors Based on ZrGeTe4 van der Waals Materials(AMER CHEMICAL SOC, 2021-09-29)The self-terminated, layered structure of van der Waals materials introduces fundamental advantages for infrared (IR) optoelectronic devices. These are mainly associated with the potential for low noise while maintaining high internal quantum efficiency when reducing IR absorber thicknesses. In this study, we introduce a new van der Waals material candidate, zirconium germanium telluride (ZrGeTe4), to a growing family of promising IR van der Waals materials. We find the bulk form ZrGeTe4 has an indirect band edge around ∼0.5 eV, in close agreement with previous theoretical predictions. This material is found to be stable up to 140 °C and shows minimal compositional variation even after >30 days storage in humid air. We demonstrate simple proof-of-concept broad spectrum photodetectors with responsivities above 0.1 AW-1 across both the visible and short-wave infrared wavelengths. This corresponds to a specific detectivity of ∼109 cm Hz1/2 W-1 at λ = 1.4 μm at room temperature. These devices show a linear photoresponse vs illumination intensity relationship over ∼4 orders of magnitude, and fast rise/fall times of ∼50 ns, also verified by a 3 dB roll-off frequency of 5.9 MHz. As the first demonstration of photodetection using ZrGeTe4, these characteristics measured on a simple proof-of-concept device show the exciting potential of the ZrGeTe4 for room temperature IR optoelectronic applications.
-
ItemCopper Tetracyanoquinodimethane (CuTCNQ): A Metal-Organic Semiconductor for Room-Temperature Visible to Long-Wave Infrared Photodetection(AMER CHEMICAL SOC, 2021-08-18)Mid-wave and long-wave infrared (MWIR and LWIR) detection play vital roles in applications that include health care, remote sensing, and thermal imaging. However, detectors in this spectral range often require complex fabrication processes and/or cryogenic cooling and are typically expensive, which motivates the development of simple alternatives. Here, we demonstrate broadband (0.43-10 μm) room-temperature photodetection based on copper tetracyanoquinodimethane (CuTCNQ), a metal-organic semiconductor, synthesized via a facile wet-chemical reaction. The CuTCNQ crystals are simply drop-cast onto interdigitated electrode chips to realize photoconductors. The photoresponse is governed by a combination of interband (0.43-3.35 μm) and midgap (3.35-10 μm) transitions. The devices show response times (∼365 μs) that would be sufficient for many infrared applications (e.g., video rate imaging), with a frequency cutoff point of 1 kHz.
-
ItemNanostructured Fishnet Silicon Photodetector Pixels as a Fully-Contained Microspectrometer Chip(IEEE, 2018)We experimentally demonstrate a microspectrometer comprising twenty silicon photodetector pixels, whose responsivities are engineered via nanostructured fishnet patterns. We computationally reconstruct the spectrum of light that illuminates the chip from the measured pixel photocurrents.
-
Item
-
ItemHigh-resolution mid-infrared spectral reconstruction using a subwavelength coaxial aperture array(OSA & IEEE, 2019-01-01)We demonstrate mid-infrared computational spectroscopy using an array of coaxial aperture filters. We experimentally determine material transmission spectra using an algorithm whose inputs are the transmission spectra and the power transmitted through each filter.
-
ItemMachine learning design of plasmonic apertures for optical nanotweezers(OSA, 2019-01-01)We present a new approach to design plasmonic structures for optical trapping. Using a simulated annealing algorithm, the shape of a nanoaperture is optimized. An order of magnitude increase in trapping potential is predicted.
-
ItemNanostructured all-Silicon Photodetector Pixels with Tailored Responsivity Spectra(SPIE-INT SOC OPTICAL ENGINEERING, 2019)We experimentally demonstrate nanostructured silicon photodetectors which consist of subwavelength arrays of verticallyoriented waveguides etched into a P-I-N photodiode. Our device combines both spectral-filtering and photocurrentgeneration in one all-Si structure. We show that absorption and responsivity spectra of these nanophotonic devices can be tuned by appropriate geometric design.