Melbourne Dental School - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 226
-
Item
-
ItemComplementation in trans of Porphyromonas gingivalis Lipopolysaccharide Biosynthetic Mutants Demonstrates Lipopolysaccharide Exchange(American Society for Microbiology, 2021-04-21)Porphyromonas gingivalis, a bacterial pathogen contributing to human periodontitis, exports and anchors cargo proteins to its surface, enabling the production of black pigmentation using a type IX secretion system (T9SS) and conjugation to anionic lipopolysaccharide (A-LPS). To determine whether T9SS components need to be assembled in situ for correct secretion and A-LPS modification of cargo proteins, combinations of nonpigmented mutants lacking A-LPS or a T9SS component were mixed to investigate in trans complementation. Reacquisition of pigmentation occurred only between an A-LPS mutant and a T9SS mutant, which coincided with A-LPS modification of cargo proteins detected by Western blotting and coimmunoprecipitation/quantitative mass spectrometry. Complementation also occurred using an A-LPS mutant mixed with outer membrane vesicles (OMVs) or purified A-LPS. Fluorescence experiments demonstrated that OMVs can fuse with and transfer lipid to P. gingivalis, leading to the conclusion that complementation of T9SS function occurred through A-LPS transfer between cells. None of the two-strain crosses involving only the five T9SS OM component mutants produced black pigmentation, implying that the OM proteins cannot be transferred in a manner that restores function and surface pigmentation, and hence, a more ordered temporal in situ assembly of T9SS components may be required. Our results show that LPS can be transferred between cells or between cells and OMVs to complement deficiencies in LPS biosynthesis and hemin-related pigmentation to reveal a potentially new mechanism by which the oral microbial community is modulated to produce clinical consequences in the human host. IMPORTANCE: Porphyromonas gingivalis is a keystone pathogen contributing to periodontitis in humans, leading to tooth loss. The oral microbiota is essential in this pathogenic process and changes from predominantly Gram-positive (health) to predominantly Gram-negative (disease) species. P. gingivalis uses its type IX secretion system (T9SS) to secrete and conjugate virulence proteins to anionic lipopolysaccharide (A-LPS). This study investigated whether components of this secretion system could be complemented and found that it was possible for A-LPS biosynthetic mutants to be complemented in trans both by strains that had the A-LPS on the cell surface and by exogenous sources of A-LPS. This is the first known example of LPS exchange in a human bacterial pathogen which causes disease through complex microbiota-host interactions.
-
ItemPrevalence and morphology of C-shaped and non-C-shaped root canal systems in mandibular second molars(WILEY, 2022-03)BACKGROUND: There are no cone-beam computed tomography (CBCT)-based data on the anatomy of mandibular second molars in an Australian population. This study investigated the prevalence and descending morphology of mandibular second molars with and without C-shaped canals using retrospective analysis of CBCT scans. METHODS: Scans from 715 patients were screened for the presence of C-shaped canals and assessed for cross-sectional configuration at five axial levels. Non-C-shaped molars were assessed for other morphological characteristics. Data were modelled against patient, tooth and CBCT scan characteristics. RESULTS: A total of 1278 teeth from 657 patients were evaluated. The overall prevalence of C-shaped canals was 13%. Cross-sectional configuration of C-shaped canals was variable, with an average of 2.8 unique cross-sections per tooth. Non-C-shaped teeth were predominantly Vertucci Type II (60%) and Type IV (29%) configurations in mesial roots, and Type I (91%) in distal roots. Additional roots occurred in 4.3% of teeth and there was a significant association between radix paramolaris and distal root bifurcation (P < 0.001). CONCLUSIONS: Cross-sectional analysis confirmed the complexity and variability of C-shaped canals. Clinicians should be cognizant of the prevalence and variability of C-shaped root canal morphology and how this may affect endodontic treatment.
-
Item
-
Item
-
ItemEffect of CPP-ACP modified-GIC on prevention of demineralization in comparison to other fluoride-containing restorative materials(WILEY, 2022-09)BACKGROUND: This study evaluated the ability of a CPP-ACP-modified Glass-ionomer cement (GIC) to inhibit demineralization around the margins of cervical cavities in natural teeth in comparison with a Giomer and conventional GIC with and without coating. METHODS: Thirty-two sound human molars were used. Box-shaped cavities were prepared along the CEJ. Teeth were randomly divided into four groups and restored with Equia Forte Fil, Coated Equia Forte Fil, Fuji VII EP or Beautifil II. Teeth were subjected to pH cycling. Micromorphological and elemental analyses were done using SEM and EDX. Polarized light microscope analysis and microhardness tests were also performed. RESULTS: Microhardness tests on enamel showed a significant difference between the coated Equia group, Equia and Beautifil II groups (P < 0.05). Dentine results showed significant differences between the coated Equia group and all other groups (P < 0.05). Elemental analysis showed significant differences in calcium weight percentage among the first and second observation levels in all groups (P < 0.05). A significant difference was found between the coated Equia group and the other three groups (P < 0.05). CONCLUSIONS: All tested materials showed some ability to resist demineralization at the restoration margins. The coated GIC restoration showed better outcomes compared with the other tested materials.
-
ItemAn In Vitro Evaluation of the Effect of 3D Printing Orientation on the Accuracy of Implant Surgical Templates Fabricated By Desktop Printer(WILEY, 2022-12)PURPOSE: To evaluate the effect of different 3D printing orientations on internal and seating accuracy of implant surgical templates fabricated by a digital light processing (DLP) printer. MATERIALS AND METHODS: A single maxillary model with a missing central incisor was used to design a surgical template for single implant placement. According to the printing orientation, three surgical template groups were included in the study: horizontal (H), angled (A) and vertical (V) (n = 10). For the H group, the templates were produced parallel to the printing platform, while for the V group, the templates were perpendicular to the platform. The A group templates had a 45° angle orientation to the platform. Each template was scanned at the fitting surface and after seating on the master model. The internal accuracy involved measuring the trueness and precision of the internal surface, while for the seating accuracy, the vertical discrepancy after seating the template was measured. To determine the difference among the groups, ANOVA test was applied followed by Tukey post hoc tests (α = 0.05). RESULTS: The H group had the lowest internal surface inaccuracy (trueness = 100.7 μm; precision = 69.1 μm) followed by A (trueness = 114.0 μm; precision = 77.3 μm) and V (trueness = 120.3 μm; precision = 82.4 μm) groups, respectively (p < 0.001). Similarly, the H group had the most superior seating accuracy (543.8 μm) followed by A group (1006.0 μm) and V group (1278.0 μm), respectively (p < 0.001). CONCLUSIONS: The orientation of 3D printing of implant surgical templates fabricated by the DLP desktop printer influenced the accuracy of the templates. The horizontally printed templates consistently exhibited superior accuracy. To reduce deviation of implant placement, it is recommended to print the surgical templates with their largest dimension parallel to the printing platform.
-
ItemDenosumab and invasive cervical root resorption: a case report(WILEY, 2022-06)
-
Item
-
ItemOperating time for wire ligation with self-ligating and conventional brackets: A standardized in vitro study(WILEY, 2022-12)OBJECTIVE: Operating time is one of the main advantages attributed from the literature to the use of self-ligating brackets (SLB). The aim of this study is to investigate the time needed for a complete archwire change procedure with conventional brackets (CB) and SLBs in a standardized in vitro research setting, comparing operators with different expertise. MATERIALS AND METHODS: Thirty-three participants were divided into three equal groups: undergraduate students, postgraduate students, and orthodontists. Three sets of typodonts bonded with three types of brackets, including passive SLBs, active SLBs, and CBs using both steel and elastic ligatures were investigated. Operators had to insert, ligate, deligate, and remove wires in sets of typodonts representing an actual dentition before and after orthodontic treatment, mounted in phantoms. Archwire change procedure times were compared between the different bracket/ligation systems, between the before- and after-treatment typodonts, and between operators. RESULTS: There were significant differences between SLBs and CBs, the greatest difference being 11 min 16 s between passive SLBs and CBs ligated with metallic ligatures at T0, for the total archwire change procedure by the operators overall. For all the operators, there was a statistically significant difference in total archwire change procedure time between the systems. The undergraduate students were the slowest when using CBs, but they showed no significant difference compared to the other users when using SLBs. CONCLUSION: SLBs can offer a significant operating time reduction compared to CBs, and time saving is not dependent on the operator's experience and training.