School of Earth Sciences - Theses

Permanent URI for this collection

Search Results

Now showing 1 - 10 of 33
  • Item
    Thumbnail Image
    The geology, petrology and geochemistry of the granitic rocks of Victoria
    Rossiter, Allan G. (University of Melbourne, 1973)
    In the field the granitic rocks of Victoria show a wide variety of characteristics but chemically all are related and are the result of similar processes that occurred cyclically during the Palaeozoic. The granites may be divided into two groups on the basis of whether or not primary hornblende is present in the more basic members of the suite. Rocks of the hornblende-free series concentrate mainly in central Victoria and usually contain biotite that is red-brown in colour. In the granites of the hornblende-bearing group green-brown biotite is generally present. The two different colours appear to indicate unlike oxygen fugacities in the magmas from which the micas crystallized. The rocks of the hornblende-bearing and hornblende-free provinces also vary slightly in chemistry - the most important difference being that the basic members of the first group contain slightly more Ca than those of the second having comparable silica content. The compositions of the Victorian granites is consistent with their derivation by anatexis of a mixture of basic igneous rocks and sedimentary material. The conclusion is drawn that a combination of Cambrian basalts and dolerites and Cambro-Ordovician sediments constitute the source. The explanation of the fact that two chemical trends are observed in the granites may lie in the possible existence of two chemically distinct groups in the Cambrian igneous rocks - the one having lower Ca predominating under central Victoria.
  • Item
    Thumbnail Image
    Investigations into diamond drilling and rock drillability: microscale and fullscale impregnated bits
    Siribumrungsukha, Boonsom ( 1980)
    Drill bits having cutting edges formed of a matrix of sintered metal powder impregnated with diamond bort (the so called "impregnated" diamond bits) have the potential to greatly increase the economy of diamond drilling, due to low production costs and long bit life resulting from reconditioning of the cutting edges. However, little detailed research into the performance of impregnated bits has been conducted, and the capacity to predict their field behaviour is limited. As a contribution to the knowledge of impregnated bit performance, this project has studied basic relationships between thrust, rotational speed and the penetration of diamond bits into rock, with particular attention paid to the development of techniques suitable for laboratory testing using miniature impregnated bits. A conventional bench drill and a radial arm drill were modified and instrumented to enable operating conditions to be controlled and drilling parameters to be measured and monitored, for microscale and fullscale drilling using impregnated drill bits. Bit performance and drilling characteristics were studied for four rock types, and rock drillability studies were carried out on seven rock types. Statistical relationships between penetration rate, specific energy, torque and drilling distance that were determined enable projection of drilling data from a standard "sharp" condition. A wear measuring device was developed to assess matrix wear of the impregnated microbits. Reconditioning was done by drilling medium-strength, abrasive Stawell sandstone. Initial penetration rate increases linearly with increases in thrust and/or rotational speed, but only within a limited range, depending on rock type and the other operating parameters. Matrix contact with the rock surface, "clogging" of the diamonds, time-dependency, and strength of diamonds and the diamond-matrix bond play important roles in these phenomena. Comparison of rock drillability between that of microscale and fullscale bits shows a straight-line relationship indicating the possibility to predict drilling performance in the field. Uniaxial compressive strength, tensile strength, and Sklerograf hardness can be used as a preliminary, but not reliable guide, to predict drillability. Petrographic characteristics and the relative scale of diamond size to grain size of minerals affect rock drillability.
  • Item
    Thumbnail Image
    The major, trace and precious metal geochemistry of some Permian layered intrusions, Central Queensland
    Reeves, Shane John ( 1990)
    The Bucknalla Complex, previously known as the Westwood Layered Intrusion, is a small, 10 km2, layered, tholeiitic, mafic-ultramafic intrusion located 50 km southwest of Rockhampton that was emplaced into an active continental margin environment in the Permian. The complex comprises clinopyroxenites, olivine clinopyroxenites, wehrlites, troctolites, hornblende gabbros, gabbros, anorthosites, leucogabbros and dolerites. It is a saucer-shaped lopolith (2200 m X 6 km at maximum stratigraphic intersection) which intruded Lower Permian spilitic pillow lavas, cherts and tuffs of the Rookwood Volcanics during the Lower Permian. It has subsequently been tilted vertically and in a northeast direction. It consists of over 15 laterally discontinuous igneous units ranging in thickness from 1-50 m. Plagioclase is a cumulus phase throughout the intrusion while orthopyroxene is absent until the very uppermost levels of the stratigraphy. The chromium composition of magnetite analysed by electron microprobe has been found to mimic whole-rock mg# and is a good measure of the degree of fractionation of the rocks. Electron microprobe analyses of samples from two traverses perpendicular to layering reveal cryptic variation in the primary phases (olivine: Fo69-83; plagioclase: An54-97; clinopyroxene mg#: Cpx67-87) which is not a simple function of stratigraphic height. Background PPGE (Pd & Pt), Au, S and Cu values for the intrusion are high while IPGE (Ir & Ru) are low. A total of 120 analyses has produced the following range of values: Pd, 2-70 ppb; Pt, 3-40 ppb; Au, 1-20 ppb; Ir, 0.01-0.07 ppb; Ru, 0.2-0.6 ppb; S, 150-400 ppm and Cu, 40-600 ppm. Platinum, Pd and Au display good correlations with Cu, particularly at more elevated levels, while Ir and Ru are better correlated with whole rock Ni and Cr. Palladium, Pt, Au, Cu & S are elevated in rocks which have intermediate whole-rock mg# (47-60). These trends suggest that the PGE are, to some extent, controlled by fractionation and that the high melting point PGEs (Ir, Ru) were precipitated with the early crystallising phases, such as olivine and clinopyroxene, whereas Pt, Pd and Au were removed from the magma by sulphides. Mantle normalized metal plots for both the mineralized and unmineralized rocks of the Bucknalla Complex display similar trends. Both plots display the anomalous low Ir content, PPGE enrichment and the clear control of sulphides on the distribution of the PGEs and Au. The ratio Pd/Ir is extremely high (1800-9300) indicating extreme fractionation of the PGEs. These trends may, in part, reflect PGE abundances inherited from the source (i.e. relatively low degrees of partial melting) but were exaggerated by the extraction of the IPGE during the early stages of fractional crystallization and by the precipitation of a PPGE-enriched sulphide component. The Complex is known to host minor Pd-Pt-Au-Cu mineralization, disseminated throughout the intrusion. The mineralization consists of chalcopyrite and bornite and their alteration products digenite and covellite, electrum (Au-Ag alloy), Pd-As, Pd-Sb, Pd-S, michenerite (PdBiTe2) and sperrylite (PtAs2). A common host rock is olivine gabbro and the silicate minerals are generally fresh. The mineralization is considered to be primary magmatic for a number of reasons, foremost of which are (i) the clear association of the PGMs with intercumulus (magmatic-textured) fresh or relict Cu-sulphides and (ii) a continuum in Pd/Pt, Cu/Pd, and Cu/Pt ratios from background to mineralized samples which strongly suggests that the processes responsible for the enhanced PGE content of the Bucknalla Complex were also responsible for mineralization. In as much as the former must have been produced by magmatic processes it is concluded that the higher grade PGE-Cu-S mineralization was also caused by primary magmatic processes. A model is proposed in which mineralization is sporadically generated by influxes of small batches of PGE-rich S-undersaturated magma into a magma chamber in which the resident magma has reached S-saturation due to fractional crystallization processes. Other intrusions in the region, namely; the Eulogie Park Complex, the Fred Creek intrusion and the Boogargan intrusion, are not considered prospective for stratiform PGE mineralization due to their low background PGE tenor, low Pd/S and Pd/Se ratios and high S contents.
  • Item
    Thumbnail Image
    The platinum-group element geochemistry and petrogenesis of the Heazlewood River mafic-ultramafic complex, Tasmania
    Peck, David C. ( 1990)
    The Heazlewood River mafic-ultramafic complex (HRC) comprises well-layered olivine- and orthopyroxene-rich cumulates, gabbronorite dykes, tonalites and low-Ti tholeiitic basalt and boninite lavas. The complex was emplaced as part of a large, low-angle thrust sheet during the middle Cambrian and subsequently deformed during the Devonian, so that the original stratigraphical relationships are obscured. The cumulate succession incorporates two distinct blocks, viz. the western HRC, comprising primitive adcumulates, and the eastern HRC, consisting of more evolved orthocumulates and mesocumulates. These two cumulate blocks are interpreted to represent stratigraphically equivalent parts of a single magma chamber. In this scenario, the western HRC represents an axial part of the intrusion where high heat flows, due to repeated injections of primitive magma, promoted the development of a compositionally zoned magma chamber. In contrast, the eastern HRC is believed to constitute a marginal facies of the intrusion, where sidewall cooling caused rapid crystallisation of successive magma additions and inhibited adcumulate growth and the formation of a compositionally stratified liquid column. Results from a detailed study of the mineral compositions and whole-rock geochemistry of the HRC suggest that all of the cumulates and most of the dykes and tonalites were derived from boninitic parental magmas. This hypothesis is substantiated by empirical models which were calculated using both major and trace element approaches. The models also show that the low-Ti basalts (second-stage melts) and boninites (third-stage melts) were probably derived from component-induced progressive partial melting of a MORB-depleted spinel lherzolite source. Partial melting of the refractory mantle source was initiated and sustained by the continued influx of slab-derived Si02-, LREE-, Zr-enriched hydrous fluids. The proposed petrogenetic model for the HRC is most consistent with an island arc setting for the complex, with melting occurring in MORB-depleted forearc lithosphere overlying a subduction zone. The HRC is not an ophiolite sensu stricto, despite the fact that it is more similar to the upper portions of the so-called 'island-arc ophiolites' (eg. Troodos) than to any other type of ultramafic intrusion. It is best perceived as a high-level boninitic magma chamber which developed immediately beneath a platform of genetically-related submarine lavas. The composition of the boninitic parental magmas was the principal control on the PGE geochemistry of the cumulate sequences. Despite representing PGE-enriched, S-undersaturated second-stage melts similar to the parental (U-type) magmas for the ultramafic portions of the Bushveld complex, the boninites were unable to form a Merensky-reef type PGE deposit because they did not come into contact with S-saturated (A-type) magmas. In the absence of cumulus sulphides, the PPGE (Pt, Pd, Rh) were partitioned into the residual liquids, whereas the IPGE (Os, Ir, Ru) were strongly fractionated into early-formed olivine-chromite cumulates. These features are highlighted by the extremely low IPGE tenor of the boninites, and the relatively high IPGE tenor of the dunites in comparison to the more evolved cumulates. Three types of chromitites are recognised in the HRC. Type I and type II chromitites occur as magmatic schlieren which probably formed during replenishment events. Type III chromitites occur as layers, pods and irregular patches developed in an unusual xenolith-bearing plagioclase peridotite. It is interpreted to have formed due to mixing between ascending xenolith-bearing, hydrous intercumulus liquids and resident ultramafic magma along the floor of the magma chamber. Chromitite occurrences in the HRC are enriched in PGE by up to two orders of magnitude relative to their ultramafic host rocks, and most strongly-enriched in Ru and/or Pt and Rh. Their PGE tenor reflects the early crystallisation of laurite, followed by Pt and Rh sulpharsenides, in response to increasing S and As activities which developed primarily due to magma mixing. The low Os and Ir abundances in the chromitites is believed to reflect their formation from Os- and Ir-depleted boninitic magmas. The HRC and the Adamsfield complex were the world's major suppliers of Os-Ir-Ru alloys during the early part of this century. The alloys occur in alluvial deposits that are spatially associated with primitive olivine-rich cumulate sequences. The latter are commonly suspected to represent the source for the alloys, but recent exploration programs have yet to define a bedrock occurrence of Os-Ir-Ru alloys in Tasmania. The results from the present study provide important constraints on the genesis of these alloys. Silicate inclusions found in the alloys suggest that they formed at mantle temperatures and pressures and were transported to crustal magma chambers by boninitic magmas. The alloys may have crystallised during ascent, or alternatively, represent residual mantle phases which became incorporated into the boninites during partial melting. Most of the observations pertaining to the Os and Ir geochemistry of the HRC suggest that the alloys probably occur in thin magmatic concentrations that were deposited along the base of the intrusion from the most primitive of the boninitic magmas involved in the generation of the cumulate sequences. Future exploration should focus on delineating the cumulate products of these primitive magmas and specifically, in defining the horizons which demarcate fresh influxes of these liquids.
  • Item
    Thumbnail Image
    Studies in Victorian Tertiary foraminifera neogene planktonic faunas
    Mallett, Clifford William ( 1977)
    Planktonic foraminiferal faunas are described for the interval late Early Miocene to the Pleistocene, in the Tertiary basins along the southern margin of Victoria, including the Otway Basin, the Port Phillip Embayment, and the Gippsland Basin. Ninety-two foraminiferal taxa are identified. The faunas are dominated in the Early Miocene by globigerinid and globigerinoidid species, by unkeeled globorotalids in the Middle Miocene, and by keeled globorotalids for most of the Late Miocene. Unkeeled globorotalids are again important in the Early Pliocene, but keeled species again reappear in the Late Pliocene and the Early Pleistocene. One Pleistocene, two Pliocene, two Late Miocene, and two Middle Miocene planktonic foraminiferal zones are recognised on the first appearance of the following species: Orbulina suturalis, Globorotalia mayeri, Globorotalia acostaensis, Globorotalia conomiozea, Globorotalia puncticulata, Globorotalia viola, Globorotalia truncatulinoides. Subzones are identified by the extinction of Globorotalia peripheroronda, and by the appearance of Globigerina nepenthes and Globorotalia plesiotumida. Foraminiferal datum levels are used to correlate the Victorian sections with the Italian stratotype sections, the New Zealand late Tertiary, and the N-zonation of Blow, and hence into the palaeomagnetic and radiometric time scales. In the Tertiary basins, the maximum extent of marine deposition occurred in the Early Miocene, and despite subsequent sea level falls, continuous marine deposition is found through the Middle Miocene and most of the Late Miocene in the Otway Basin and the Port Phillip Embayment. Shallowing within the Middle Miocene is reflected by breaks in the Gippsland Basin sections, and lithological changes in other basins. A major sea withdrawal occurred near the top of the Miocene. Small scattered Pliocene deposits indicate short high sea level phases at the base of the Pliocene, in the middle of the Pliocene, and about the Pliocene - Pleistocene boundary.
  • Item
    Thumbnail Image
    Altitudinal distribution of vegetation in the headwaters of the Wongungarra River, Victoria
    WATSON, FRED ( 1993)
    Changes in vegetation composition with respect to altitude were investigated in the sclerophyllous forests of the Australian mountain region. Vegetation was surveyed at 148 sites along two transects which were located to maximise variation in altitude and minimise the influence of environmental factors not directly related to altitude. The measurement, simulation, and estimation of environmental variables revealed that this aim was met except at the end-points of the transects where secondary influences are present.
  • Item
    Thumbnail Image
    The geology and geochemistry of the Agnew Intrusion: implications for the petrogenesis of early Huronian mafic igneous rocks in Central Ontario, Canada
    Vogel, Derek Christian ( 1996-07)
    The Early Proterozoic Agnew Intrusion is a well-preserved leucogabbronoritic to gabbronoritic layered intrusion that is a member of the East Bull Lake suite of layered intrusions (ca. 2490-2470 Ma) occurring in central Ontario. These intrusions are related to the development of the Huronian Rift Zone, which may be part of a much more widespread rifting event that involved the Fennoscandian Shield. Structural data suggest that these intrusions have been subjected to ductile deformation and are erosional remnants of one or more sill-like bodies originally emplaced along the contact between Archaean granitic rocks of the Superior Province and an Early Proterozoic Huronian continental flood basalt sequence in the Southern Province.
  • Item
    Thumbnail Image
    The development of a high quality historical temperature data base for Australia
    Torok, Simon James ( 1996)
    A high quality, historical surface air temperature data set is essential for the reliable investigation of climate change and variability. In this study, such a data set has been prepared for Australia by adjusting raw mean annual temperature data for inhomogeneities associated with station relocations, changes in exposure, and other problems. Temperature records from long-term stations were collaborated from the set of all raw data held by the Australian Bureau of Meteorology. These long-term records were extended by combining stations and manually entering previously unused archived temperature measurements. An objective procedure was developed to determine the necessary adjustments, in conjunction with complementary statistical methods and station history documentation. The objective procedure involved creating a reference time series for each long-term station, from the median values at surrounding, well-correlated stations. Time series of annual mean maximum and mean minimum temperatures have been produced for 224 stations, and the adjusted dataset has been made available to the research community. The adjusted data are likely to be more representative of real climatic variations than raw data due to the removal of discontinuities. The adjusted data set has been compared with previously used temperature data sets, and data sets of other parameters. The adjusted data set provides adequate spatial coverage of Australia back to 1910. Additional adjusted data are available prior to this date at many stations. Trends in annual mean maximum, minimum, the mean of the maximum and minimum, and the range between the maximum and minimum, have been calculated at each site. Maximum and minimum temperatures have increased since about 1950, with minimum temperatures increasing faster than maximum temperatures.
  • Item
    Thumbnail Image
    Mineralogy, geochemistry and origin of the Kalgoorlie gold deposits, Western Australia
    Golding, Lee Yvonne ( 1978)
    Rich gold-telluride lodes (steeply dipping and flatly dipping) and minor gold-quartz stockwork mineralization characterize the Kalgoorlie gold-field. The origin of these gold deposits, the relationship between deposits and then nature of the host rocks are the major problems considered in this thesis. Extensive diamond drilling at the essentially unmineralized southern end of the field provided excellent material for stratigraphic studies and for country rock analysis whilst ore samples were obtained from both mines and drill core.
  • Item
    Thumbnail Image
    Australian lineament tectonics: with an emphasis on northwestern Australia
    Elliott, Catherine I. ( 1994-08)
    Australia is transected by a network of systematic continental-scale lineaments that are considered to be zones of concentrated, aligned tectonic activity which have apparent continuity over vast distances. The influence of lineaments on the rock record can be identified in many types of data-sets, and existing data reveals previously undescribed basement influences. Several continental-scale lineaments can be traced offshore with apparent continuity for hundreds to thousands of kilometres, two of which are seen to cross the Tasman Sea in offshore eastern Australia. Geological and chronological evidence demonstrates that many of the lineaments have been zones of reactivation since at least the Early Proterozoic (- 1880 Ma) and that they appear to cross major terrane boundaries. Alternative models for their origin are a) a pre-existing lineament network maintained in an ancient basement underlying the entire continent; b) lateral propagation of crustal-scale structures; c) alignment of genetically unrelated lineaments giving the appearance of continuity. Australian deep-seismic profiles show that continental-scale lineaments are zones of crustal-scale structure which in some cases transect the crust-mantle boundary. Lineaments demonstrate many faulting styles, e.g. listric extensional (G3), planar moderate-angle thrusts (G2 l), and sub-vertical thrusts (G 17). In some cases the structural style varies laterally along the length of the lineament. (For complete abstract open document)