Electrical and Electronic Engineering - Theses
Permanent URI for this collection
Search Results
1 - 10 of 135
-
ItemExtremum Seeking Control for Systems with Input Hysteresis( 2023)Extremum seeking control (ESC) is a class of data-driven online optimization techniques that can find an optimum value of an unknown steady-state input-output mapping of a controlled dynamical system using its input and/or output measurements. The extremum seeking literature is extensive and many algorithms were proposed in the past 20 years. The focus of this thesis is extremum seeking for systems with actuators that exhibit hysteresis, which we represent using a simple Bouc-Wen hysteresis model. For instance, magneto-restrictive, piezo-ceramics and shape memory alloy actuators exhibit such hysteresis behaviour. Using simulations, we first demonstrate that a standard continuous time extremum seeking scheme does not perform well when applied to such systems with hysteresis nonlinearities. Next, we propose a modification of this ESC by adding to it a high-frequency sinusoidal dither signal and, then, prove that this modified scheme achieves extremum seeking. Our analysis demonstrates that the standard assumption of the existence of a unique minimum or maximum in the steady-state map does not hold for systems with hysteresis. Yet, we prove that the modified scheme achieves extremum seeking for such systems if the ESC parameters are tuned appropriately. Finally, we demonstrate our theoretical results via simulations. The proof of our main result relies on the Lyapunov stability theory, partial averaging, and singular perturbation techniques.
-
ItemA Blockchain-based Solution for Sharing IoT Devices( 2022)The Internet of Things (IoT) includes billions of sensors and actuators (which we refer to as IoT devices) that harvest data from the physical world and send it via the internet to IoT applications to provide smart IoT solutions. These IoT devices are often owned by different organizations or individuals who deploy them and utilize their data for their own purposes. Procuring, deploying, and maintaining IoT devices for exclusive use of an individual IoT application is often inefficient, and involves significant cost and effort that often outweigh the benefits. On the other hand, sharing IoT devices that are procured, deployed, and maintained by different entities (IoT device providers or simply providers) is efficient, cost-effective and enables rapid development and adoption of IoT applications. Currently, most IoT applications themselves procure, deploy, and maintain the sensors they need to collect the IoT data they require as there is limited support for sharing IoT devices and their costs. Therefore, there is a need for developing an IoT device sharing solution that allow IoT applications to 1) discover already deployed IoT devices, 2) use discovered IoT device data (IoT data) for their own purposes, and 3) share-cost of IoT device deployment via a “pay-as-you-go” model similar to cloud computing. To address the aforementioned problems, in this thesis we propose, develop, implement, evaluate, and validate a solution namely IoT Devices Sharing (IoTDS). IoTDS enables scalable and cost-efficient discovery and use of IoT devices by IoT applications. IoTDS incorporates services for IoT device registration, IoT device query, IoT device payment and IoT device integration. To support these services, we propose 1) a novel IoTDS ontology, an extension of Semantic Sensor Network (SSN) ontology to describe IoT devices and their data to enable IoT device registration and query services. The IoTDS ontology also provides for describing the payment and integration information that is used by IoT device payment and integration service; 2) a special-purpose blockchain namely IoTDS Blockchain that has been developed specifically to support the needs of the IoTDS services i.e., supporting decentralised and scalable query, integration and payments services for IoT devices and applications. Specifically, IoTDS Blockchain incorporates a distributed semantic triple store and functions to register IoT devices, and specialised transactions for supporting IoT device payments (we propose a new cryptocurrency namely SensorCoin); 3) a novel IoT marketplace (IoTDS marketplace) that offers an interface and a protocol (IoTDS protocol) to support the interactions between IoT devices, IoT applications, IoTDS Blockchain, and IoTDS services. IoTDS solution 1) facilitates IoT devices deployed across the globe by different providers to be queried by any IoT application; we term this global, 2) enables via the IoTDS Blockchain a non-ownership model; we term this IoT-owned i.e., no individual/organisation owns it or controls it, 3) able to handle the vast and ever-increasing number of IoT devices and IoT applications; we term this scalable, and 4) able to support and integrate heterogenous of IoT devices and their data; we term this interoperable. In this thesis, we provided implementation details of IoTDS services that includes IoTDS ontology, marketplace, and blockchain. the IoTDS ontology has been modelled using Protegee and Owl and implemented using RDF. The IoTDS Blockchain and corresponding functions are implemented using NodeJS and Web Socket. The IoTDS marketplace and corresponding IoTDS protocol has been implemented using NodeJS and MQTT. We conducted large-scale experimental evaluation of IoTDS solution by deploying it on Nectar cloud (20 instances) using both real and simulated (5,000,000) IoT devices and IoT applications (5000) to assess and validate the scalability and performance of IoTDS. We also developed and validated a mathematical model that can be used to estimate the performance of the IoTDS with the increasing number of IoT devices. Experimental outcomes show that the proposed IoTDS solution performs great (linear scalability) in supporting global discovery, use, and cost-share of large numbers of IoT devices and applications. The main contributions of this thesis are 1) an IoTDS solution for sharing IoT devices, 2) a survey of techniques for supporting IoT device sharing; 3) a special purpose Blockchain to support sharing of IoT devices, 4) a novel Marketplace to support registration, querying, payment, and integration of IoT devices, 5) a novel protocol for autonomic control of integrating IoT devices and fetching their data, and 6) an implementation and experimental evaluation of the IoTDS solution.
-
ItemAdvanced Control of Wind Energy Conversion Systems for Grid Frequency Support( 2022)Renewable energy sources have been increasing rapidly recently. These generation units which are converter based technologies are replacing the conventional generator systems in the power grid. As a result fewer generators are participating in frequency regulation services and the frequency deviation from its nominal value has increased lately. An example of these converter based technologies are wind turbines which normally operate in maximum power point tracking meaning that they generate as much energy that they can possibly harvest from the wind. The problem of frequency deviation has increased the attention of many researchers to tackle the problem and investigate the possibility of wind turbines to participate in frequency regulation services. Frequency regulation is done by controlling the appropriate active power supplied to the transmission lines. There are various responses to an event that happens in the grid. While the inertial response and primary frequency response are the first two controls of the system to bring the frequency back to its operating point, secondary frequency regulation aims to eliminate steady state error of the frequency from its nominal value. Secondary frequency regulation is managed by the market operator. This means that the generation units have to track a power command signal generated by the market operator. This problem could be modeled as a tracking problem, since the wind generation unit has to track a power command signal sent by the market operator and reject the disturbances such as wind variation or fluctuations of the terminal voltage of the converter based generators. The problem is inherently difficult due to the time varying power commands as references and the stochastic disturbances such as wind variations. Technologies such as Light Detection And Ranging (LIDAR) has absorbed the attention of many researchers. This technology provides preview information for the coming wind disturbances up to several seconds ahead. Methods to use this information for better tracking the power command signal or better performance in maximum power point tracking has been the topic of many research articles so far. In this thesis, we will investigate the capability of a classical control methodology to provide wind turbines with the capability to participate in frequency regulation services. This control methodology is known as exact output regulation. It considers a time invariant plant model and has the capability to track a known reference signal and reject disturbance signals. The wind information could be modeled using an exo-system and produce the disturbance signal and the market operator will produce the reference signals to be tracked. This thesis will have two different scenarios considering the problem of secondary frequency regulation. In the first scenario the wind turbine is modeled by a high fidelity aero-elastic simulator known as Fatigue, Aerodynamics, Structures, and Turbulence (FAST) in conjunction with a simple generator. In this section the control is basically on the wind turbine and LIDAR wind preview information is also used to obtain the disturbance signal. In the second scenario we will investigate adding a Doubly Fed Induction Generator (DFIG) instead of a simple generator and design the control for both the generator and wind turbine. We have investigated two different types of output regulation which are well suited for each problem. To have a realistic results we have employed FAST 5 MW reference for the turbine model. The DFIG is implemented in MATLAB Simulink and to simulate stochastic wind signals we have used Turbsim which is able to generate different practical classes of wind signals. Then the two different problems has been addressed and compared against the performance of baseline controllers. The baseline controllers are the most widely used methods for wind turbine active power control. Different control objectives are defined in each chapter for the purpose of comparison between the proposed controller and the baseline controllers. These include the root mean squared error between the generated power and the power command signals, fatigue loads and actuator usage. Results show that the proposed output regulation methods in both scenarios are able to track the command signals better than the baseline controllers. In terms of the fatigue loads, in the first scenario the controller is able to reduce the fatigue loads in most of the considered fatigue cases such as blade and tower bending moments as well as the low speed shaft torque, however in the second scenario the fatigue loads for tower and blade bending moments were similar to baseline controller and only the low speed shaft torque was improved. The input command signals was smoother in both of the scenarios when using the proposed output regulation control techniques.
-
ItemAutomated Assessment of Motor Functions in Stroke using Wearable Sensors( 2022)Driven by the aging population and an increase in chronic diseases worldwide, continuous monitoring of human activities and vital signs have become a major focus of research. This has been facilitated by the advent of wearable devices equipped with miniaturized sensors. Compared to bench-top devices in hospitals and laboratories, wearable devices are popular in improving health outcomes, because of their compact form factors and unobtrusive nature. Stroke, a neurological disorder, is a major concern among all chronic diseases because it causes high rates of death and disability globally every year. Motor deterioration is the most common effect of stroke, leading to one-sided weakness (i.e., hemiparesis), and limiting movements and coordination. Stroke survivors require regular assessments of motor functionality during the acute, sub-acute and chronic phases of recovery, leading to dependence on human intervention and massive expenditures on patient monitoring. Therefore, an automated system for detecting and scoring hemiparesis, independent of continuous specialized medical attention, is necessary. This thesis develops various methods to objectively quantify motor deterioration related to stroke using wearable motion sensors, for automated assessment of hemiparesis. In the first part of the thesis, we use accelerometer data acquired from wrist-worn devices to analyze upper limb movements and identify the presence and severity of hemiparesis in acute stroke, during a set of spontaneous and instructed tasks. We propose measures of time (and frequency) domain coherence between accelerometry-based activity measures from two arms, that correlate with the clinical gold standard National Institutes of Health Stroke Scale (NIHSS). This approach can accurately distinguish between healthy controls, mild-to-moderate and severe hemiparesis through supervised pattern recognition, using a hierarchical classification architecture. We propose additional descriptors of bimanual activity asymmetry, that characterize the distribution of acceleration-derived activity surrogates based on gross and temporal variability, through a novel bivariate Poincare analysis method. This leads to achieving further granularity and sensitivity in hemiparesis classification into four classes, i.e., control, mild, moderate and severe hemiparesis. The second part of the thesis analyzes the quality of spontaneous upper limb motion captured using wearable accelerometry. Here, velocity time series estimated from the acquired data is decomposed into movement elements, which are smoother and sparser in the normal hand than the paretic hand, and the amount of smoothness correlates with hemiparetic severity. Using statistical features characterizing their bimanual disparity, this method can classify mild-to-moderate and severe hemiparesis with high accuracy. Compared to the activity-based features, this method is more interpretable in terms of joint biomechanics and movement planning, and is robust to the presence of noise in the acquired data. In the third part of the thesis, we propose unsupervised methods for bimanual asymmetry visualization in hemiparesis assessment, using motion templates representative of well-defined instructed tasks. These methods are aimed at creating models for assessing the qualitative progression of motor deterioration over time instead of single-point measurements, or when class labels representing clinical severity are not available. We propose variants of the Visual Assessment of (cluster) Tendency (VAT) algorithm, to study cluster evolution through heat maps, by representing instructed task patterns through local timeseries characteristics, known as shapelets. These shapelets transform high dimensional sensor data into low-dimensional feature vectors for VAT evaluation. We show the significance of these methods for efficient and interpretable cluster tendency assessment for anomaly detection and continuous motion monitoring, applicable not only to hemiparesis assessment, but also in identifying motor functionality in other neurological disorders or activity recognition problems. Finally, in the fourth part of the thesis, we show applications of the above methods to objectively measure gait asymmetry in stroke survivors, using lower limb position data from wearable infrared markers and camera-based motion capture devices. These methods can efficiently quantify the severity of lower limb hemiparesis, thereby being suitable for automated gait monitoring during extended training and rehabilitation in the chronic phase of recovery.
-
ItemThermo-mechanical energy storage applications for energy system decarbonisation( 2022)This research explores the prospective application of thermo-mechanical energy storage technologies for energy system decarbonisation. It characterises, first, the techno-economic performance of one such technologies, Liquid Air Energy Storage (LAES), when operated within the power system to supply energy and reserve services. Then, Liquid Air Energy Storage operation as a multi-energy asset is studied. To conclude, the potential of six between established and novel thermo-mechanical energy storage concepts is cross-compared and benchmarked with incumbent storage technologies for long-duration energy storage applications.
-
ItemScenario Based Optimization over Uncertain System Identification Models( 2022)A model describes the relationship between inputs and outputs of a system and offers an explanation of the system behaviour. Mathematical models of dynamical systems are widely used in many field of science and engineering. There are uncertainties associated with the models, and it is important to quantify these uncertainties. System identification can be used to obtain models of dynamical system. A typical system identification approach is to select a parameterized model class and estimate the unknown parameters from observed data. This includes method such as least squares, prediction error methods and instrumental variable methods that give a point estimate for the unknown parameters. There is always an error between the estimate and the true model parameter when the observed data are noisy. This error represents the model uncertainty. Another way to describe the model uncertainty is to use confidence regions. A confidence region contains a set of plausible values for the unknown true parameter and contains the true parameter with a certain probability. There are many ways to construct confidence regions. By using asymptotic system identification theory and assuming the number of data points goes to infinity, confidence regions that contains the true model parameter with a certainty probability can be found. In recent years, new methods such as Leave-out Sign-dominant Correlation Regions (LSCR) and Sign-Perturbed Sums (SPS) have also been developed which provide confidence regions when only a finite number of data points are available. In optimization based design problem, a cost function reflecting the design target is minimized. The found decision variable and minimized cost will depend on the model parameter, which is unknown but can be described by the confidence region. One approach is to apply a robust design, which minimizes the worst case value of the cost function over a set of unknown parameters. This problem can be difficult to solve in some cases. Therefore a computationally tractable method called scenario approach is used in this thesis. In the scenario approach, samples are drawn from the model uncertainty set and an optimization problem is then solved based on the drawn samples. In this thesis approaches that combine system identification methods and the scenario approach for different data generating systems are investigated. They are considered in three different settings. In the Bayesian framework, a Bayesian approach to system identification is considered and the system parameters are viewed as a realization of a random vector. Using the observed data, the posterior density of the system parameters can be computed and used as the model uncertainty set from which samples are drawn from to be used in scenario approach. Algorithms are provided to obtain approximately i.i.d samples from the posterior distribution. In the non-Bayesian framework, a model is obtained via system identification and the uncertainty associated with the model is characterized by the distribution of estimation error. By knowing this estimation error, samples can be built based on this estimation error. Algorithms are provided for obtaining the samples and theoretical results are also given. In the Sign-Perturbed Sums framework, we use SPS method to find the confidence region and this confidence region is considered as the model uncertainty. By knowing whether a given point belongs to the SPS confidence region, algorithms for combining SPS and scenario approach are designed.
-
ItemUniformly Bounded State Estimation over Multiple Access Channels( 2022)In this doctoral thesis, a characterization of the zero-error capacity region for three different classes of multiple access channels (MACs) is derived. The first type of channels considered in this work is a two-user MAC with a common message that captures the correlation between transmitters. Next, this model is extended by considering an arbitrary number of users M >= 2. The last class of MACs represents a further extension to a more general case where inter-user correlation is modeled by a common message seen by all users as well as pairwise shared messages. In this research, we look at the zero-error capacity, which differs from the more commonly studied small-error capacity, from a nonprobabilistic angle. In fact, the obtained characterization is based on the so-called nonstochastic information, and is valid not only for asymptotically large coding block-lengths but also for finite lengths. Understanding how to coordinate unambiguous communication through MACs, such that several unrelated senders can simultaneously send as much information as possible is of great interest, especially with the emergence of new paradigms such as the Internet of Things (IoT) and Machine-to-Machine (M2M) communication. Next, using the characterization of the zero-error capacity region for the two-user MAC, we investigate the problem of distributed state estimation under the criterion of uniformly bounded estimation errors. It is shown that if there exists a coder-estimator tuple that achieves the desired criterion, namely uniformly bounded estimation error, the vector of topological entropies of the linear systems, whose state is being estimated, must lie within the zero-error capacity region of the communication channel. Additionally, we prove that if the to-be-observed plants have a topological entropy vector inside the interior of the zero-error capacity region, the existence of a coder-estimator tuple achieving uniformly bounded state estimation errors is guaranteed. This result relates the channel properties to the plant dynamics and paves the way toward understanding information flows in networked control systems with multiple transmitters. Finally, we seek to characterize the fundamental tradeoff between the communication data rate, code-length, system dynamics and state estimation performance. To this end, a universal lower bound on the time-asymptotic estimation error is obtained using volume-based analysis. Additionally, to provide a guarantee on the estimation performance, an upper bound on the error is derived when the measurements are quantized. When the code-length is large, we show that these lower and upper bounds converge to the same limit.
-
ItemArchitecture and Policy Design for Next-generation Access Networks( 2022)With more than twenty years down the twenty-first century, communication networks are undergoing a paradigm shift. Due to the increase in available computing power, computing-intensive applications in form of augmented/virtual reality, internet of vehicles, remote automation, etc., have emerged in addition to the traditional voice, video, and data. The increasing role of computing in executing applications over networks led to the emergence of cloud, and subsequently edge and fog computing. Next-generation networks are envisioned to be application-driven and designed to satisfy end-to-end (E2E) quality of service (QoS) and quality of experience (QoE) requirements of the applications, considering both network and computing paradigms. This thesis focuses on achieving the aforementioned goals at the access part of the network that connects end-users to the service providers. The access segment of the network experiences significant dynamic behavior as compared to its core counterpart due to the independent and random nature of users and customers. The thesis investigates two popular access network technologies: Passive Optical Networks (PON) and Radio Access Networks (RAN), in the context of fog and edge computing. While PON is a wired access network, RAN connects to users wirelessly with a wired counterpart from radio stations to the edge/core servers (also known as backhaul). It is desired that fog/edge nodes be integrated with PON in a cost-effective and seamless manner, without altering the protocols in place. In addition, it is important to investigate and design dynamic bandwidth allocation (DBA) policies that can satisfy the strict QoS requirements. Chapter 3 of this thesis, demonstrates how to design a cost-effective fog-integrated architecture for PON. It also delineates a dynamic bandwidth allocation protocol that enables the communication between fog node and users without significantly changing the existing DBA of PON. In Chapter 4, the problem of satisfying strict QoS requirements is solved using the Model Predictive Control (MPC) technique. For this, an innovative delay tracking mechanism using virtual queues is developed, allowing one to take far-sighted decisions in contrast to short-sighted ones that is commonly employed in the literature. In RAN, it is envisioned that future networks be zero-touch, implying that the network is able to intelligently automate its policies according to demands, thus significantly reducing human intervention. Orchestrators such as software defined network (SDN) controller (for networks) and Kubernetes (for servers) play an important role as key enablers of a zero-touch implementation. To meet the different QoE requirements of new applications, networking and computing resources are virtualized and sliced-up for each application type, also known as network slicing. To achieve E2E QoE, the two orchestrators should work jointly and create slices of networking and computing resources to satisfy E2E QoE. In addition, they must establish the relationships between E2E QoE and resources so that resource requirements are decided for both deterministic and dynamically changing environments in an automated manner. Chapter 5 of this thesis develops sequential distributed learning and optimization models to learn the relationships under static and dynamic conditions and take robust slicing decisions to achieve E2E QoE at the backhaul of RAN. The learning process requires the incorporation of artificial intelligence (AI) in the slicing process which is a crucial step towards zero-touch network design. To summarize, this thesis demonstrates how next-generation access network architectures involving fog/edge computing are designed, operated and maintained in an automated and seamless manner.
-
ItemIndoor Optical Wireless Communications Employing Beam Shaping Techniques( 2022)The explosion in the volume of information exchange within our personal spaces demands new and improved ways of communicating between devices and machines as well as humans. With the emergence of new ways of user interaction such as virtual reality (VR) and augmented reality (AR) as well as new applications such as remote tele-surgery and smart home, demand for short-haul and high capacity wireless communications technologies will rise sharply. In addition, such technologies will be expected to offer high-speed, ultra-wideband and low latency wireless connections and scalable networking. Achieving these objectives via the current radio frequency (RF) based wireless communication technologies such as Wi-Fi, ultra-wideband (UWB) and millimeter-wave communications will face challenges due to congestion of the spectrum. Optical wireless communications (OWC) have emerged as another promising alternative to support ultra-high-speed and data-intensive wireless connections and networks for indoor applications in the foreseeable future due to its unique advantages such as scalable unregulated bandwidth, high security and flexible networking solutions. OWC systems will require optical sources such as lasers which are used to generate steerable optical wireless beams to establish coverage zones. These laser beams do exhibit specific intensity profiles across their cross-sections. To realize high performance OWC with stable performance for all users regardless of their location within the coverage area of these beams, optical beams would require beam shaping to equalize the intensity variation. In this thesis, a comprehensive investigation of beam shaping techniques to further improve the performance of current OWC systems including the effective coverage and the robustness to the pointing errors and link blockages is presented. Few-mode propagation in fibers and orbital angular momentum (OAM) mode propagation in free-space were exploited to propose specific beam shaping methods. These were then demonstrated in proof of concept experiments and investigated using analytical and numerical models. Specific receiver technologies and configurations were used to evaluate high capacity OWC downlink transmission and their performance were investigated. A multi-user OWC system using few-mode based beam shaping with time-slot coding (TSC) has been proposed and numerically conducted. The effective coverage, tolerance to signal overlapping and delay interval can be enhanced by employing few-mode based beam shaping. The impacts of the power ratio between different transmitted modes have been also thoroughly evaluated via the simulation. Furthermore, a novel dual-single-sideband multi-user system using few-mode based beam shaping is deployed to further improve the system spectral efficiency. Adaptive equalization methods including least mean square (LMS) and recursive least-square (RLS) are theoretically investigated and experimentally compared to improve the performance of indoor OWC systems employing few-mode based uniform beam shaping. For a reference BER threshold of KP4 FEC limit, the LMS based single-equalizer scheme with a step size of 0.0035 and a tap number of 61 has the lowest computational complexity. Repetition-coding (RC) and Alamouti-type orthogonal space-time-block-coding (STBC) have been investigated as transmitter diversity techniques for indoor OWC employing OAM mode-based beam shaping with different power ratios of the modes. Besides, the experimental demonstrations and simulations of OAM mode-based beam shaping for indoor OWC systems have been conducted for proof-of-concept. The results show that the effective coverage can be expanded significantly by employing OAM mode-based beam shaping compared to conventional OWC systems without beam shaping and the optimal performance for a symbol rate of 10 Gbaud can be obtained when the power ratio of OAM0/OAM1 and OAM0/OAM2 is 0.33 and 0.38, respectively. Furthermore, the BER performance distribution in different directions within the optical cell has also been evaluated.
-
ItemSimulation and Fabrication of Printable/Solution Processed Inorganic Quantum Dot LEDs( 2022)Modern integrated circuit (IC) technology is silicon-based, and its manufacturing technologies have evolved into an extremely complicated process. The state-of-the-art complementary metal oxide semiconductor (CMOS) manufacturing technologies can fabricate high performance ICs, consisting of billions of transistors. The rapid development of electronics industry facilitates the emergence of novel electronic devices, such as flexible displays, visual/augment reality (VR / AR) glasses, foldable mobile phones and wearable devices. Coming alongside the exceptional performance of electronic devices, however, the conventional IC manufacturing is becoming highly investment-intensive and time-consuming. It costs billions of dollars to build a fab, where more than 60% of the cost contributes to the expensive facilities, including clean room, ultraviolet (UV) lithography systems and extremely high vacuum environment. The capital and technical barriers make semiconductor industry a game only for tech giants, greatly hindering the innovations from small- and medium-sized companies. For the past decade, novel solution process or printable electronics has shown tremendous potential in the manufacturing low-cost electronic devices. Compared to the conventional manufacturing methods, solution process is cheaper, easier, and eco-friendly. The superior compatibility with functional materials and various substrates makes solution process a great candidate for the fabrication of novel light emitting diode (LED) displays. In this thesis, we focused on the realization of low-cost transparent flexible LEDs using novel emissive material quantum dots (QDs). The electrical and chemical properties of the synthesized functional inks were well-studied. We also developed a deep understanding of solution process and modern printing techniques. By using this knowledge, transparent quantum dots LED (QLED) was fabricated, and it shows great potential in applications of next generation displays. The aim of this research is to design and fabricate electronic components for the application of next generation flexible displays. To achieve this goal, QLEDs was designed and fabricated to demonstrate the light emitting capability as a high performance transparent light source. Besides, LED driving circuitry is required to demonstrate the addressing and control capabilities for LED devices. Thus, the design and fabrication of thin film transistors (TFTs) were investigated for the realization of solution-processed LED driving circuits. In this case, the design architecture or development process of the QLED circuits can be divided into two parts, where one part focuses on the realization of QLED while the other part concentrates on the development of printable TFTs. Detailed architecture or structure of this research is elaborated as follows. In the first part of the thesis, we will be studying the properties of functional inks used for the fabrication of thin film transistors, QLED as well as the synthesis procedures. Various characterizations were taken to investigate the structure, surface morphology of different materials. In addition, the working principle of solution process and several printing methods were studied. By fabricating a prototype transistor, the ink formulation was investigated and optimized to be compatible with the inkjet printing process. Next, transparent QLED device using solution-processed metal oxide carrier transport layers was fabricated. The carrier transport layer materials were derived by low-temperature sol-gel combustion process with post-annealing temperature below 275 Celsius degree. The introduction of copper doping into nickel oxide (NiO) as interlayer further improved the hole injection efficiency, making the QLED perform better. The QLED turn-on voltage has been reduced from 4.5 to 2.5 V, which makes the QLED compatible with CMOS electronics. While preserving good semiconducting performance, the as-derived thin films show good quality and high optical transparency, which facilitate the application of transparent electronics. After that, the modelling and simulation of QLED will be discussed. A theoretical framework is developed and provides insights about how each design choice and parameter affects critical QLED attributes of the fabricated QLEDs. The simulation results showed good accordance with the experimental results and theoretical analysis, making it possible to further optimize the structure and materials used in QLED fabrication. Lastly, the simulation of QDs photodiode were presented, which demonstrated the feasibility of QDs based solution processed optoelectronic devices. Based on the present experimental results, we believe that the solution-processed or printed electronics can be a game changer for the rapidly developing microelectronic market.