School of Agriculture, Food and Ecosystem Sciences - Theses
Permanent URI for this collection
Search Results
1 - 1 of 1
-
ItemEffects of resistance to prehension and structure of pastures on grazing behaviour and intake of dairy cows( 2000)Pasture intake by dairy cows is affected by plant and sward structural characteristics of the pasture. In the meantime, grazing animals are constrained to gather their food bite by bite removing only a portion of the herbage present at the location which they bite. The extent to which grazing animals overcome the constraints imposed by the plant and structural characteristics of the pasture is the major determinant of herbage intake. The experiments which form the basis of this thesis concentrated on determining the role of sward resistance to prehension, measured in situ, as an integrating sward characteristic that determines foraging decisions of cows and the extent to which they defoliate pasture swards. Under rotational grazing systems, a cow is offered an area of pasture that is often smaller than the area from which the cow harvests its bites (defoliated area, DA). The cow therefore faces changing sward conditions during the process of grazing down into the sward and removing bites at successive lower defoliation planes. The defoliation pattern in grazing down the sward profile and the consequent herbage intake and diet composition, are examined in this thesis. A novel apparatus was designed to measure the BFF in situ at different sward profile heights. In the initial experiment, changes in BFF down the sward profile of six pasture species were examined in order to evaluate the mechanical efficiency of defoliating bites at different depths, in terms of bite weight:BFF ratio. The hypothesis tested was that cows remove 30 - 40% of the sward height at each bite due to a mechanical advantage in terms of BW:BFF. The BFF varied more between defoliation strata than between pasture species. The bite weight and BFF increased with the depth of defoliation. The mechanical efficiency of defoliating bites estimated as the BW:BFF ratio declined slightly with bite depth until a depth of about 30 - 40% of the sward height is reached, when the ratio declined more rapidly. Based on these results and those of Wade (1991), four theoretical defoliation planes (DPI, DP2, DP3 & DP4) were set each at 35% of the pre-grazing sward heights to estimate the total area defoliated by grazing cows under different sward conditions. DP2 is the plane of removal of a second bite after a first bite has removed DPI. Three spring grazing experiments were conducted to explore relationships between pasture allowance and/or sward structure and intake dynamics. In the first experiment, cows were offered a herbage allowance (HA) of 50 kg DM/cow/day either as one block with continuous access for 24 hours, or as six equal break rations opened at intervals during a 24 hour period. In the two subsequent experiments, different sward types were created in order to alter the BFF. In the second experiment swards were created with two different surface heights (USH) and in a 2 x 2 factorial, cows were offered two HA (35 and 70 kgDM/cow/day). In the third experiment, swards with three different tiller densities were created and cows were offered a similar HA of 8 kg DM/cow/3 hours. The defoliation pattern, BFF at 30, 50 and 70% of USH, DM intake, grazing behaviour and the energetics of grazing were measured. The major conclusions derived from these experiments are as follows. The average depth of defoliation (DD) increased with sward height and fell between DP2 and DP4. However, the proportion of area defoliated at each defoliation plane declined down the profile, at rates that varied with HA and tiller density but was unaffected by sward height. At a HA of 70 kg, cows barely reached DP4. The area defoliated at DP4 increased with decreasing herbage allowance and decreasing tiller density. The initial bulk density and post-grazed bulk density declined with USH, but the grazed-stratum bulk density was not significantly affected by USH. Therefore, it was concluded that the volume of canopy defoliated was the major determinant of intake. With increasing HA, the average bite weight (BW) increased, prehension bite rate declined but the overall intake rate increased. The time cost of a bite increased with BW. However, the energy expenditure on prehending a bite did not show a consistent relationship with BW. The BFF increased with sward height and tiller density. However, BFF in the leafy layer of 70% of the sward height was not affected by initial sward height or tiller density. The increase in BFF with initial sward height and tiller density was greater in the lower stemmy layer of 30% sward height. The average bite area (BA) and BW increased with HA. Intake was positively correlated with HA (R = 0.49), HM (R = 0.65) and tiller density (R = 0.51). Multiple regression analysis with herbage intake as the dependent variable indicated that, in addition to HM and HA (R2 = 0.887) , inclusion of the difference in BFF between that at 30% USH and that at 70% USH (BFFdif) as a sward characteristic provided an equation with a substantially better fit (R2 = 0.956). DMI = -3.47 + 1.80 HM + 0.225 HA R2 = 0.887 DMI = -2.73 I + 2.76 HM + 0.732 HA - 0.0416 BFFdif R2 = 0.956 It is concluded that the BFFdif has a significant value in integrating the changes in sward characteristics down the profile and is useful in improving the intake model.