Radiolabelled peptides are vital tools used in positron emission tomography imaging for the diagnosis of disease, drug discovery, and biomedical research. Peptides are typically labeled through conjugation to a radiolabelled prosthetic group, which usually necessitates complex, multi-step procedures, especially for fluorine-18 labeled peptides. Herein, we describe the automated synthesis and formulation of 2-[18 F]fluoropropionate labeled RGD-peptides through use of the iPHASE Flexlab as an effective dual-stage radiochemical synthesis module. The fully automated preparation of the monomeric RGD-peptides, [18 F]FP-GalactoRGD and [18 F]FP-c(RGDy(SO3 )K), was accomplished in under 90 minutes with n.d.c. radiochemical yields ca. 7% from fluoride. Similarly, the automated preparation of the dimeric RGD-peptides, [18 F]F-PRGD2 and [18 F]FP-E(RGDy(SO3 )K)2 , was accomplished in under 105 minutes with n.d.c. yields ca. 4% from fluoride.

The rise in antibiotic resistance has led to a renewed interest in antimicrobial peptides (AMPs) that target membranes. The mode of action of AMPs involves the disruption of the lipid bilayer and leads to growth inhibition and death of the bacteria. However, details at the molecular level of how these peptides kill bacteria and the reasons for the observed differences in selectivity remain unclear. Structural information is crucial for defining the molecular mechanism by which these peptides recognize, self-assemble and interact with a particular lipid membrane. Solid-state NMR is a non-invasive technique that allows the study of the structural details of lipid-peptide and peptide-peptide interactions. Following on from studies of antibiotic and lytic peptides, gramicidin A and melittin, respectively, we investigated maculatin 1.1, an AMP from the skin of Australian tree frogs that acts against Gram-positive bacteria. By using perdeuterated phospholipids and specifically labelled peptides, 2 H, 31 P and {31 P}15 N REDOR solid-state NMR experiments have been used to localize, maculatin 1.1 in neutral and anionic model membranes. However, the structure, location and activity depend on the composition of the model membrane and current advances in solid-state NMR spectroscopy now allow structure determination of AMPs in live bacteria.

Alternative sigma (σ) factors govern expression of bacterial genes in response to diverse environmental signals. In Pseudomonas aeruginosa σPvdS directs expression of genes for production of a siderophore, pyoverdine, as well as a toxin and a protease. σFpvI directs expression of a receptor for ferripyoverdine import. Expression of the genes encoding σPvdS and σFpvI is iron-regulated and an antisigma protein, FpvR20 , post-translationally controls the activities of the sigma factors in response to the amount of ferripyoverdine present. Here we show that iron represses synthesis of σPvdS to a far greater extent than σFpvI . In contrast ferripyoverdine exerts similar effects on the activities of both sigma factors. Using a combination of in vivo and in vitro assays we show that σFpvI and σPvdS have comparable affinities for, and are equally inhibited by, FpvR20 . Importantly, in the absence of ferripyoverdine the amount of FpvR20 per cell is lower than the amount of σFpvI and σPvdS , allowing basal expression of target genes that is required to activate the signalling pathway when ferripyoverdine is present. This complex interplay of transcriptional and post-translational regulation enables a co-ordinated response to ferripyoverdine but distinct responses to iron.

Herein we describe the auxiliary-directed arylation of unactivated C(sp3 )-H bonds with aryldiazonium salts, which proceeds under synergistic photoredox and palladium catalysis. The site-selective arylation of aliphatic amides with α-quaternary centres is achieved with high selectivity for β-methyl C(sp3 )-H bonds. This operationally simple method is compatible with carbocyclic amides, a range of aryldiazonium salts and proceeds at ambient conditions.

Hydrogen sulfide (H2 S) has been identified as an important cell-signaling mediator and has a number of biological functions, such as vascular smooth muscle relaxation, neurotransmission, and regulation of inflammation. A facile and versatile approach for H2 S production initiated by light irradiation and controlled by reaction with an amine or an amino acid was developed. The donor was synthesized in a one-pot reaction, and simple crystallization led to a yield of approximately 90 %. The synthetic strategy is scalable and versatile, and the H2 S donors can be expressed ina number of different molecular and macromolecular forms, including crystalline small-molecule compounds, water-soluble polymers, polystyrene films, and hydrogels. The H2 S donors based on polystyrene film and hydrogel were used as cell-culture scaffolds. The H2 S donor based on water-soluble polymer was applied in photocontrolled inhibition of P-selectin expression on human platelets and subsequent regulation of platelet aggregation. This study provides the simplest controllable H2 S source to study its biological functions. The developed materials are also new therapeutic platforms to deliver H2 S, as there is no accumulation of toxic byproducts, and the donor materials from polystyrene films and hydrogels can be readily removed after releasing H2 S.

The need for effective CO2 capture systems remains high, and due to their tunability, metallosupramolecular architectures are an attractive option for gas sorption. While the use of extended metal organic frameworks for gas adsorption has been extensively explored, the exploitation of discrete metallocage architectures to bind gases remains in its infancy. Herein the solid state gas adsorption properties of a series of [Pd2(L)4]4+ lantern shaped coordination cages (L = variants of 2,6‐bis(pyridin‐3‐ylethynyl)pyridine), which had solvent accessible internal cavities suitable for gas binding, have been investigated. The cages showed little interaction with dinitrogen gas but were able to take up CO2. The best performing cage reversibly sorbed 1.4 mol CO2 per mol cage at 298 K, and 2.3 mol CO2 per mol cage at 258 K (1 bar). The enthalpy of binding was calculated to be 25–35 kJ mol−1, across the number of equivalents bound, while DFT calculations on the CO2 binding in the cage gave ΔE for the cage–CO2 interaction of 23–28 kJ mol−1, across the same range. DFT modelling suggested that the binding mode is a hydrogen bond between the carbonyl oxygen of CO2 and the internally directed hydrogen atoms of the cage.

The present work reports the electrical properties of polycrystalline Ta‐doped TiO2 (0.39 at.% Ta) determined in situ at elevated temperatures (1173‐1323 K) in the gas phase of controlled oxygen activity (10−12 Pa to 105 Pa). The effect of oxygen activity on the electrical conductivity and thermoelectric power of TiO2 is discussed in terms of defect disorder, including (1) the intrinsic electronic disorder that is governed by electronic compensation in the strongly reducing regime, (2) the extrinsic electronic disorder that is governed by electronic charge compensation in the reducing regime, and (3) the extrinsic ionic disorder that is governed by ionic compensation in the oxidizing regime. It is shown that tantalum ions are incorporated into the titanium sublattice of TiO2 leading to the formation of donor‐type energy levels. The Arrhenius‐type plot of the electrical conductivity data leads to the determination of the formation enthalpy terms. The obtained results are considered in terms of the effect of tantalum and oxygen activity on the defect disorder and the associated key performance‐related properties in the light‐induced partial water oxidation.

A family of halogen-substituted Schiff base iron(II) complexes, [FeII (qsal-X)2 ], (qsal-X=5-X-N-(8-quinolyl)salicylaldimines)) in which X=F (1), Cl (2), Br (3) or I (4) has been investigated in detail. Compound 1 shows a temperature invariant high spin state, whereas the others all show abrupt spin transitions, at or above room temperature, namely, 295 K (X=I) up to 342 K (X=Br), these being some of the highest T1/2 values obtained, to date, for FeII N/O species. We have recently reported subtle symmetry breaking in [FeII (qsal-Cl)2 ] 2 with two spin transition steps occurring at 308 and 316 K. A photomagnetic study reveals almost full HS conversion of [FeII (qsal-I)2 ] 4 at low temperature (T(LIESST)=54 °K). The halogen substitution effects on the magnetic properties, as well as the crystal packing of the [FeII (qsal-X)2 ] compounds and theoretical calculations, are discussed in depth, giving important knowledge for the design of new spin crossover materials. In comparison to the well known iron(III) analogues, [FeIII (qsal-X)2 ]+ , the two extra π-π and P4AE interactions found in [FeII (qsal-X)2 ] compounds, are believed to be accountable for the spin transitions occurring at ambient temperatures.

Within the endoplasmic reticulum, immature glycoproteins are sorted into secretion and degradation pathways through the sequential trimming of mannose residues from Man9 GlcNAc2 to Man5 GlcNAc2 by the combined actions of assorted α-1,2-mannosidases. It has been speculated that specific glycoforms encode signals for secretion and degradation. However, it is unclear whether the specific signal glycoforms are produced by random mannosidase action or are produced regioselectively in a sequenced manner by specific α-1,2-mannosidases. Here, we report the identification of a set of selective mannosidase inhibitors and development of conditions for their use that enable production of distinct pools of Man8 GlcNAc2 isomers from a structurally defined synthetic Man9 GlcNAc2 substrate in an endoplasmic reticulum fraction. Glycan processing analysis with these inhibitors provides the first biochemical evidence for selective production of the signal glycoforms contributing to traffic control in glycoprotein quality control.

The uptake of inhalation anesthetics by three topologically identical frameworks is described. The 3D network materials, which possess square channels of different dimensions, are formed from the relatively simple combination of ZnII centres and dianionic ligands that contain a phenolate and a carboxylate group at opposite ends. All three framework materials are able to adsorb N2O, Xe and isoflurane. Whereas the framework with the widest channels is able to adsorb large quantities of the various guests from the gas phase, the frameworks with the narrower channels have superior binding enthalpies and exhibit higher levels of retention. The use of ligands in which substituents are bound to the aromatic rings of the bridging ligands offers great scope for tuning the adsorption properties of the framework materials.

We report the first example of an alkene with two carbon‐bound substituents (imidazole and imidazolium rings) where the Z‐isomer has a greater thermodynamic stability than the E‐isomer which persists in both the gas phase and in solution. Theoretical calculations, solution fluorescence spectroscopy and gas‐phase ion mobility mass spectrometry studies confirm the preference for the Z‐isomer, the stability of which is traced to a non‐covalent interaction between the imidazole lone pair and the imidazolium ring.

A major challenge is the development of multifunctional metal-organic frameworks (MOFs), wherein magnetic and electronic functionality can be controlled simultaneously. Herein, we rationally construct two 3D MOFs by introducing the redox active ligand tetra(4-pyridyl)tetrathiafulvalene (TTF(py)4 ) and spin-crossover FeII centers. The materials exhibit redox activity, in addition to thermally and photo-induced spin crossover (SCO). A crystal-to-crystal transformation induced by I2 doping has also been observed and the resulting intercalated structure determined. The conductivity could be significantly enhanced (up to 3 orders of magnitude) by modulating the electronic state of the framework via oxidative doping; SCO behavior was also modified and the photo-magnetic behavior was switched off. This work provides a new strategy to tune the spin state and conductivity of framework materials through guest-induced redox-state switching.

Biophysical studies were undertaken to investigate the binding and release of short interfering ribonucleic acid (siRNA) from lyotropic liquid crystalline lipid nanoparticles (LNPs) by using a quartz crystal microbalance (QCM). These carriers are based on phytantriol (Phy) and the cationic lipid DOTAP (1,2‐dioleoyloxy‐3‐(trimethylammonium)propane). The nonlamellar phase LNPs were tethered to the surface of the QCM chip for analysis based on biotin–neutravidin binding, which enabled the controlled deposition of siRNA–LNP complexes with different lipid/siRNA charge ratios on a QCM‐D crystal sensor. The binding and release of biomolecules such as siRNA from LNPs was demonstrated to be reliably characterised by this technique. Essential physicochemical parameters of the cationic LNP/siRNA lipoplexes—such as particle size, lyotropic phase behaviour, cytotoxicity, gene silencing and uptake efficiency—were also assessed. The SAXS data show that when the pH was lowered to 5.5 the structure of the lipoplexes did not change, thus indicating that the acidic conditions of the endosome were not a significant factor in the release of siRNA from the cationic lipidic carriers.

A ZnII complex of the dianionic tetradentate ligand formed by deprotonation of glyoxal‐bis(4‐phenyl‐3‐thiosemicarbazone) (H2gtsp) is a [3+3] trinuclear triangular prism. Recrystallization of this complex in the presence of either CO2, CS2, or CH3CN leads to the formation of [4+4] open‐ended charge‐neutral tetranuclear coordination nanotubes, approximately 2 nm in length and with internal dimensions large enough to accommodate linear guest molecules, which serve to template their formation. Upon removal of the templating molecules the nanotubes demonstrated reversible sorption of CO2 with an isosteric enthalpy of sorption of 28 kJ mol−1 at low loading.

Design of new bimetallic catalysts requires an understanding of how cooperative effects of the metal sites influences reactivity. Here we show how switching one or both of the silver atoms in binuclear silver hydride cations, [dppmAg2(H)]+ (dppm=1,1‐Bis(diphenylphosphino)‐methane), with all combinations of copper and/or gold maintains selective dehydrogenation of formic acid, enhancing reactivity by up to 2 orders of magnitude. This is a key step in the selective, catalyzed extrusion of carbon dioxide from formic acid, HO2CH, with important applications in hydrogen storage and in situ generation of H2. Decarboxylation of [dppmMM′(O2CH)]+ through collision induced dissociation regenerates [dppmMM′(H)]+. DFT calculations provide insights into these cooperative effects. The copper homobinuclear catalyst performs best overall.

The efficiencies of the hybrid organic-inorganic perovskite solar cells have been rapidly approaching the benchmarks held by the leading thin-film photovoltaic technologies. Arguably, one of the most important factors leading to this rapid advancement is the ability to manipulate the microstructure of the perovskite layer and the adjacent functional layers within the device. Here, an analysis of the nucleation and growth models relevant to the formation of perovskite films is provided, along with the effect of the perovskite microstructure (grain sizes and voids) on device performance. In addition, the effect of a compact or mesoporous electron-transport-layer (ETL) microstructure on the perovskite film formation and the optical/photoelectric properties at the ETL/perovskite interface are overviewed. Insight into the formation of the functional layers within a perovskite solar cell is provided, and potential avenues for further development of the perovskite microstructure are identified.

Using nanoparticles to deliver drugs to cells has the potential to revolutionize the treatment of many diseases, including HIV, cancer, and diabetes. One of the major challenges facing this field is controlling where the drug is trafficked once the nanoparticle is taken up into the cell. In particular, if drugs remain localized in an endosomal or lysosomal compartment, the therapeutic can be rendered completely ineffective. To ensure the design of more effective delivery systems we must first develop a better understanding of how nanoparticles and their cargo are trafficked inside cells. This needs to be combined with an understanding of what characteristics are required for nanoparticles to achieve endosomal escape, along with methods to detect endosomal escape effectively. This review is focused into three sections: first, an introduction to the mechanisms governing internalization and trafficking in cells, second, a discussion of methods to detect endosomal escape, and finally, recent advances in controlling endosomal escape from polymer- and lipid-based nanoparticles, with a focus on engineering materials to promote endosomal escape. WIREs Nanomed Nanobiotechnol 2017, 9:e1452. doi: 10.1002/wnan.1452 For further resources related to this article, please visit the WIREs website.

We describe the reaction of anion [RhCl6]3− with a series of hydantoin ligands (HL1, HL2 and HL3 = 5‐methyl‐5‐(2‐, 3‐ and 4‐pyridyl)‐2,4‐imidazolidenedione, respectively). Based on spectroscopic, cyclic voltammetric, elemental and MS analyses, the complexes have the general formula K[RhCl2(L1)2] (1), cis‐ and trans‐K[RhCl4(HL2)2] (2a and 2b) and cis‐ and trans‐K[RhCl4(HL3)2] (3a and 3b). Complexes 2a, 2b, 3a and 3b were characterized successfully using infrared, 1H NMR and 13C NMR spectral analyses. Dissolution of complex 1 in dimethylsulfoxide (DMSO) led to elimination of one KL1 ligand and coordination of two DMSO molecules as ligands and transformation of this complex to cis‐ and trans‐[RhCl2L1(DMSO)2] (1a and 1b). Recrystallization led to separation and isolation of crystals of 1a from the initial mixture. X‐ray analysis results showed that this complex was crystallized as solvated complex cis‐[RhCl2L1(DMSO)2]DMSO. The catalytic activity of these complexes was then evaluated for the hydrogenation of various ketones.

The human relaxin peptide family consists of seven cystine-rich peptides, four of which are known to signal through relaxin family peptide receptors, RXFP1-4. As these peptides play a vital role physiologically and in various diseases, they are of considerable importance for drug discovery and development. Detailed structure-activity relationship (SAR) studies towards understanding the role of important residues in each of these peptides have been reported over the years and utilized for the design of antagonists and minimized agonist variants. This review summarizes the current knowledge of the SAR of human relaxin 2 (H2 relaxin), human relaxin 3 (H3 relaxin), human insulin-like peptide 3 (INSL3) and human insulin-like peptide 5 (INSL5). LINKED ARTICLES: This article is part of a themed section on Recent Progress in the Understanding of Relaxin Family Peptides and their Receptors. To view the other articles in this section visit http://onlinelibrary.wiley.com/doi/10.1111/bph.v174.10/issuetoc.

Divalent [Yb(DippForm)2 (thf)n ] (n=2 (1 a), or 1 (1 b), DippForm=N,N'-bis(2,6-diisopropylphenyl)formamidinate) complexes were treated with the ketones: 9-fluorenone (fn), or 2,3,4,5-tetraphenylcyclopentadienone (tpc, tetracyclone), giving ketyl complexes: [Yb(DippForm)2 (fn. -O)(thf)] (2), and [Yb(DippForm)2 (tpc. -O)] (3), respectively (ketyl=a radical anion containing a C. -O(-) group. By contrast, when perfluorobenzophenone (pfb) was treated with either 1 a or 1 b, transitory ketyl formation was followed by rapid decomposition through a C-F activation pathway, giving [YbF(DippForm)2 (thf)] (4 a) and a highly unusual fluoride/oxide-bridged species: [Yb5 F6 O2 (DippForm)5 ] (4 b). The reduction of diketones: 3,5-di-tert-butyl-1,2-benzoquinone (tbbq), 9,10-phenanthrenequinone (phen), or 1,2-acenaphthenequinone (acen), was also examined giving ketyl complexes: [Yb(DippForm)2 (tbbq. -O2 )] (5), [Yb(DippForm)2 (phen. -O2 )] (6), and [Yb(DippForm)2 (acen. -O2 )(thf)] (7). An unsolvated derivative of 7, namely [Yb(DippForm)2 (acen. -O2 )] (8), was obtained from PhMe. All ketyl complexes had suitably elongated C. -O bonds, were stable in both polar and non-polar solvents-an uncommon trait for rare-earth ketyl complexes-and, with the exception of 3, showed radical signals in ESR spectra. To investigate the reactivity of the tpc. -O ketyl complex, 3 was treated with oxidants (CS2 , Se) and reducing agents (Mg0 , KH, or [SmI2 (thf)2 ]). Thus 3 was oxidised to tpc by Se. Treatment of 3 with KH led to a ligand exchange process giving an unusual diketyl species [Yb(DippForm)(tpc. -O)2 (thf)2 ] (10), which has two cisoid tpc. -O- ligands in very close proximity. When treated with [SmI2 (thf)2 ], the tpc. -O ketyl was further reduced to a dianion (1-oxido-2,3,4,5-tetraphenylcyclopentadianide2- ), ({C5 Ph4 }-O)2- by [SmI2 (thf)2 ], giving dimeric [{SmI({C5 Ph4 }-O)(thf)2 }2 ] (Sm11) and monomeric complexes [YbI(DippForm)2 (thf)] (11 b) and [YbI2 (DippForm)(thf)2 ] (11 c). Activated Sm metal reduced neutral tetracyclone to the dianion, ({C5 Ph4 }-O)2- , in THF, giving tetranuclear [{SmII2 ({C5 Ph4 }-O)2 (thf)3 }2 ] (Sm13). Treatment of Sm13 with iodine in situ provided access to [{SmI({C5 Ph4 }-O)(thf)2 }2 ] (Sm11), in good yield.

Mycobacterium tuberculosis produces dideoxymycobactin-838 (DDM-838), a lipopeptide that potently activates T cells upon binding to the MHC-like antigen-presenting molecule CD1a. M. tuberculosis produces DDM-838 in only trace amounts and a previous solid-phase synthesis provided sub-milligram quantities. We describe a high-yielding solution-phase synthesis of DDM-838 that features a Mitsunobu substitution that avoids yield-limiting epimerization at lysine during esterification, and amidation conditions that prevent double-bond isomerization of the Z-C20:1 acyl chain, and provides material with equivalent antigenicity to natural DDM-838. Isomers of DDM-838 that varied in stereochemistry at the central lysine and the C20:1 acyl chain were compared for their ability to be recognised by CD1a-restricted T cell receptors (TCRs). These TCRs, derived from unrelated human donors, exhibited a similar spectrum of reactivity towards the panel of DDM-838 isomers, highlighting the exquisite sensitivity of lipopeptide-reactive T cells for the natural DDM stereochemistry.

Two series of branched tetramers of the proline-rich antimicrobial peptide (PrAMP), Chex1-Arg20, were prepared to improve antibacterial selectivity and potency against a panel of Gram-negative nosocomial pathogens including Escherichia coli, Klebsiella pneumoniae, Acinetobacter baumannii and Pseudomonas aeruginosa. First, tetramerization was achieved by dithiomaleimide (DTM) conjugation of two C-terminal-cysteine bearing dimers that also incorporated C-terminal peptide chemical modification. DTM-linked tetrameric peptides containing a C-terminal hydrazide moiety on each dimer exhibited highly potent activities in the minimum inhibitory concentration (MIC) range of 0.49-2.33 μm. A second series of tetrameric analogues with C-terminal hydrazide modification was prepared by using alternative conjugation linkers including trans-1,4-dibromo-2-butene, α,α'-dibromo-p-xylene, or 6-bismaleimidohexane to determine the effect of length on activity. Each displayed potent and broadened activity against Gram-negative nosocomial pathogens, particularly the butene-linked tetrameric hydrazide. Remarkably, the greatest MIC activity is against P. aeruginosa (0.77 μm/8 μg mL-1 ) where the monomer is inactive. None of these peptides showed any cytotoxicity to mammalian cells up to 25 times the MIC. A diffusion NMR study of the tetrameric hydrazides showed that the more active antibacterial analogues were those with a more compact structure having smaller hydrodynamic radii. The results show that C-terminal PrAMP hydrazidation together with its rational tetramerization is an effective means for increasing both diversity and potency of PrAMP action.

How the immune system maintains peripheral tolerance under inflammatory conditions is poorly understood. Here we assessed the fate of gastritogenic T cells following inflammatory activation in vivo. Self-reactive T cells (A23 T cells) specific for the gastric H+ /K+ ATPase α subunit (HKα) were transferred into immunosufficient recipient mice and immunised at a site distant to the stomach with adjuvant containing the cognate HKα peptide antigen. Activation of A23 T cells by immunisation did not impact on either immune tolerance or protection from gastric autoimmunity in wild-type BALB/c mice. However, increased presentation of endogenously derived HKα epitopes by dendritic cells (DCs) in the gastric lymph node of IE-H+ /K+ β transgenic mice (IEβ) reduces A23 T-cell tolerance to gastric antigens after inflammatory activation, with subsequent development of gastritis. While HKα-specific A23 T cells from immunised wild-type mice were poorly responsive to in vitro antigen specific activation, A23 T cells from immunised IEβ transgenic mice were readily re-activated, indicating loss of T-cell anergy. These findings show that DCs of gastric lymph nodes can maintain tolerance of pathogenic T cells following inflammatory stimulation and that the density of endogenous antigen presented to self-reactive T cells is critical in the balance between tolerance and autoimmunity.

Molecular distortion of dynamic molecules gives a clear signature in the vibrational spectra, which can be modeled to give estimates of the energy barrier and the sensitivity of the frequencies of the vibrational modes to the reaction coordinate. The reaction coordinate method (RCM) utilizes ab initio-calculated spectra of the molecule in its ground and transition states together with their relative energies to predict the temperature dependence of the vibrational spectra. DFT-calculated spectra of the eclipsed (D5h ) and staggered (D5d ) forms of ferrocene (Fc), and its deuterated analogue, within RCM explain the IR spectra of Fc in gas (350 K), solution (300 K), solid solution (7-300 K), and solid (7-300 K) states. In each case the D5h rotamer is lowest in energy but with the barrier to interconversion between rotamers higher for solution-phase samples (ca. 6 kJ mol-1 ) than for the gas-phase species (1-3 kJ mol-1 ). The generality of the approach is demonstrated with application to tricarbonyl(η4 -norbornadiene)iron(0), Fe(NBD)(CO)3 . The temperature-dependent coalescence of the ν(CO) bands of Fe(NBD)(CO)3 is well explained by the RCM without recourse to NMR-like rapid exchange. The RCM establishes a clear link between the calculated ground and transition states of dynamic molecules and the temperature-dependence of their vibrational spectra.

The significance of imaging hypoxia with the positron emission tomography ligand [(18) F]FMISO has been demonstrated in a variety of cancers. However, the slow kinetics of [(18) F]FMISO require a 2-h delay between tracer administration and patient scanning. Labeled chloroethyl sulfoxides have shown faster kinetics and higher contrast than [(18) F]FMISO in a rat model of ischemic stroke. However, these nitrogen mustard analogues are unsuitable for routine production and use in humans. Here, we report on the synthesis and in vitro and in vivo evaluation of a novel sulfoxide, which contains an ester moiety for hydrolysis and subsequent trapping in hypoxic cells. Non-decay corrected yields of radioactivity were 1.18 ± 0.24% (n = 27, 2.5 ± 0.5% decay corrected radiochemical yield) based on K[(18) F]F. The radiotracer did not show any defluorination and did not undergo metabolism in an in vitro assay using S9 liver fractions. Imaging studies using an SK-RC-52 tumor model in BALB/c nude mice have revealed that [(18) F]1 is retained in hypoxic tumors and has similar hypoxia selectivity to [(18) F]FMISO. Because of a three times faster clearance rate than [(18) F]FMISO from normoxic tissue, [(18) F]1 has emerged as a promising new radiotracer for hypoxia imaging.

BACKGROUND AND PURPOSE: Insulin-like peptide 5 (INSL5) is a two-chain, three-disulfide-bonded peptide of the insulin/relaxin superfamily, uniquely expressed in enteroendocrine L-cells of the colon. It is the cognate ligand of relaxin family peptide RXFP4 receptor that is mainly expressed in the colorectum and enteric nervous system. This study identifies new signalling pathways activated by INSL5 acting on RXFP4 receptors. EXPERIMENTAL APPROACH: INSL5/RXFP4 receptor signalling was investigated using AlphaScreen® proximity assays. Recruitment of Gαi/o proteins by RXFP4 receptors was determined by rescue of Pertussis toxin (PTX)-inhibited cAMP and ERK1/2 responses following transient transfection of PTX-insensitive Gαi/o C351I mutants. Cell proliferation was studied with bromodeoxyuridine. RXFP4 receptor interactions with β-arrestins, GPCR kinase 2 (GRK2), KRas and Rab5a was assessed with real-time BRET. Gene expression was investigated using real-time quantitative PCR. Insulin release was measured using HTRF and intracellular Ca2+ flux monitored in a Flexstation® using Fluo-4-AM. KEY RESULTS: INSL5 inhibited forskolin-stimulated cAMP accumulation and increased phosphorylation of ERK1/2, p38MAPK, Akt Ser473 , Akt Thr308 and S6 ribosomal protein. cAMP and ERK1/2 responses were abolished by PTX and rescued by mGαoA , mGαoB and mGαi2 and to a lesser extent mGαi1 and mGαi3 . RXFP4 receptors interacted with GRK2 and β-arrestins, moved towards Rab5a and away from KRas, indicating internalisation following receptor activation. INSL5 inhibited glucose-stimulated insulin secretion and Ca2+ mobilisation in MIN6 insulinoma cells and forskolin-stimulated cAMP accumulation in NCI-H716 enteroendocrine cells. CONCLUSIONS AND IMPLICATIONS: Knowledge of signalling pathways activated by INSL5 at RXFP4 receptors is essential for understanding the biological roles of this novel gut hormone. LINKED ARTICLES: This article is part of a themed section on Recent Progress in the Understanding of Relaxin Family Peptides and their Receptors. To view the other articles in this section visit http://onlinelibrary.wiley.com/doi/10.1111/bph.v174.10/issuetoc.

The effective escape of nanocarriers from endosomal compartments of the cell remains a major hurdle in nanomedicine. The endosomal escape of pH-responsive, self-assembled, dual component particles based on poly[2-(diethylamino)ethyl methacrylate)(PDEAEMA) and poly(ethylene glycol)-b-poly[2-(diethylamino)ethyl methacrylate) (PEG-b-PDEAEMA) has been recently reported. Herein, we report that polymer molecular weight (Mn ) can be used to tune endosomal escape of nanoparticle delivery systems. PDEAEMA of Mn 7 kDa, 27 kDa, 56 kDa and 106 kDa was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization and co-assembled with PEG-b-PDEAEMA (16 kDa) via nanoprecipitation. All particles had similar size, displayed pH-responsive behaviour, and low toxicity regardless of molecular weight. Ovalbumin was loaded in the particles to demonstrate loading and release capabilities and as a marker to study internalization and endosomal escape. Association and endosomal escape was found to depend on molecular weight, with enhanced escape observed for high Mn PDEAEMA: 42% of cells with particle induced endosomal escape for 106 kDa nanoparticles, compared to minimal escape for 7 kDa particles. The results show that a simple variation in molecular weight can enhance the endosomal escape of polymeric carriers, and thus improve their effectiveness for intracellular delivery of therapeutics.

Absolute rate coefficients for the reaction between the important environmental free radical oxidant NO3. and a series of N- and C-protected amino acids, di- and tripeptides were determined using 355 nm laser flash photolysis of cerium(IV) ammonium nitrate in the presence of the respective substrates in acetonitrile at 298±1 K. Through combination with computational studies it was revealed that the reaction with acyclic aliphatic amino acids proceeds through hydrogen abstraction from the α-carbon, which is associated with a rate coefficient of about 1.8×106  m-1  s-1 per abstractable hydrogen atom. The considerably faster reaction with phenylalanine [k=(1.1±0.1)×107  m-1  s-1 ] is indicative for a mechanism involving electron transfer. An unprecedented amplification of the rate coefficient by a factor of 7-20 was found with di- and tripeptides that contain more than one phenylalanine residue. This suggests a synergistic effect between two aromatic rings in close vicinity, which makes such peptide sequences highly vulnerable to oxidative damage by this major environmental pollutant.

OBJECTIVES: To compare biofilm-forming ability, hydrolytic enzymes and ethanol-derived acetaldehyde production of oral Candida isolated from the patients with oral cancer and matched non-oral cancer. MATERIAL AND METHODS: Fungal biofilms were grown in RPMI-1640 medium, and biofilm mass and biofilm activity were assessed using crystal violet staining and XTT salt reduction assays, respectively. Phospholipase, proteinase, and esterase production were measured using agar plate method, while fungal acetaldehyde production was assessed via gas chromatography. RESULTS: Candida isolated from patients with oral cancer demonstrated significantly higher biofilm mass (P = 0.031), biofilm metabolic activity (P < 0.001), phospholipase (P = 0.002), and proteinase (P = 0.0159) activity than isolates from patients with non-oral cancer. High ethanol-derived acetaldehyde-producing Candida were more prevalent in patients with oral cancer than non-oral cancer (P = 0.01). In univariate regression analysis, high biofilm mass (P = 0.03) and biofilm metabolic activity (P < 0.001), high phospholipase (P = 0.003), and acetaldehyde production ability (0.01) were significant risk factors for oral cancer; while in the multivariate regression analysis, high biofilm activity (0.01) and phospholipase (P = 0.01) were significantly positive influencing factors on oral cancer. CONCLUSION: These data suggest a significant positive association between the ability of Candida isolates to form biofilms, to produce hydrolytic enzymes, and to metabolize alcohol to acetaldehyde with their ability to promote oral cancer development.

We report the synthesis, structure, and spectroscopic and dynamic magnetic properties of a series of heterodinuclear complexes, [ZnLn(LH4 )2 ](NO3 )3 ⋅6 H2 O (Ln=Nd, Tb, Dy, Ho, Er, and Yb), with the singly deprotonated form of a new compartmentalized Schiff-base ligand, LH5 . The Ln(III) ions in these systems show a distorted square-antiprism geometry with an LnO8 coordination sphere. EPR spectroscopy and DC magnetic studies have shown that the anisotropic nature of the complexes is far more complicated than predicted on the basis of a simple electrostatic model. Among the investigated systems, only the Dy(III) derivative showed single-ion magnet behavior, in zero and an applied magnetic field, both in pure polycrystalline samples and in a series of polycrystalline samples with different degrees of dilution at the single-crystal level in the isostructural Y(III) derivative. The rich dynamics observed as functions of frequency, field, and temperature reveals that multiple relaxation mechanisms are at play, resulting in a barrier of 189 cm(-1) , which is among the highest reported for a dinuclear Zn-Dy system. Analysis of the dynamic behavior as a function of dilution degree further evidenced the persistence of non-negligible intermolecular interactions, even at the lowest concentration of 1 %.

The interpretation of molecular translational diffusion as measured by pulsed gradient spin-echo NMR (PGSE NMR) can be complicated by the presence of chemical exchange and/or dipolar cross-relaxation (including relayed cross-relaxation via spin diffusion). The magnitude of influence depends on the kinetics of exchange and/or dipolar cross-relaxation present within the system as well as the PGSE NMR sequences chosen for the measurements. Firstly, we present an exchange induced zero-crossing phenomenon for signal attenuation of water in lipidic cubic phases (LCPs, formed by a mixture of monoolein and water) in the presence of pulsed gradients observed using a standard STimulated Echo (STE) sequence. This magnetization exchange induced zero-crossing phenomenon, a pseudo negative diffraction-like feature, resembles that reported previously for restricted diffusion when locally anisotropic pores are polydisperse or randomly oriented. We then demonstrate the elimination of these exchange and/or dipolar cross-relaxation induced effects with the use of a chemical shift selective STE (CHESS-STE) sequence, adapted from the previously reported band-selective short transient STE (BEST-STE) sequence, along with results obtained from the bipolar pulse pair STE (BPP-STE) sequence for comparison. The CHESS-STE sequence introduced here represents a generic form of PGSE NMR sequences for obtaining water diffusion coefficients free from influence of exchange and/or dipolar cross-relaxation in complex systems. It has potential applications in measuring translational diffusion of water in biopolymer mixtures as well as probing microscopic structure in materials via water restricted diffusion measured by PGSE NMR, particularly when the potential presence of exchange/cross-relaxation is of concern.

This study aims at comprehensively investigating the possibility of fabricating cross-linked polymer inclusion membranes (PIMs) using the most common base polymers (i.e., poly(vinyl chloride), cellulose triacetate and poly(vinylidene fluoride-co-hexafluoropropylene)), cross-linking polymers or monomers (i.e., poly(ethylene glycol) dimethylacrylate, poly(ethylene glycol) divinylether and N-ethylmaleimide) and photo-initiators (i.e., 2,2-dimethoxy-2-phenyl acetophenone, triarylsulfonium hexafluorophosphate and triphenylphosphine oxide). The suitability of the photo-initiators for the different cross-linking polymers/monomers in poly(vinyl chloride)-based membranes (without extractants) was assessed for the first time, which was followed by optimizing the cross-linking conditions (i.e., membrane composition and duration of UV-irradiation) for all three base polymers studied. The optimum concentrations of photo-initiator and UV-treatment times were different for the different base polymers used, thus highlighting the importance of this study. Aliquat 336 and di-(2-ethylhexyl)phosphoric acid, as the most frequently used PIM extractants, were added to the compositions of the homogeneous cross-linked membranes produced under optimal conditions and the extraction performance of the newly developed cross-linked PIMs was compared with that of their non-cross-linked counterparts in the extraction of SCN− and Zn2+, respectively. The results showed that all but one of the 13 homogeneous cross-linked PIMs obtained in this study could extract up to 45% more of the corresponding target species than their non-cross-linked counterparts and the remaining one performed similarly to the relevant non-cross-linked PIM. The initial fluxes for the cross-linked PIMs were up to 10 times higher than those of the relevant non-cross-linked membranes and in two cases the fluxes were similar in value. These results demonstrate the potential of cross-linking for enhancing the extraction performance of PIMs.

This study demonstrated the advantages of cross-linking of polymer inclusion membranes (PIMs) in terms of improved stability, rate of extraction and extractive capacity. These advantages were illustrated with the new cross-linked PIM for the selective extraction of Zn(II), developed as part of this study and containing bis-(2-ethylhexyl)phosphoric acid (D2EHPA) as the carrier (extractant). Three different base-polymers were tested, namely poly(vinyl chloride) (PVC), poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and cellulose triacetate (CTA), using poly(ethylene glycol) dimethacrylate (PEG-DMA) as the cross-linking polymer and 2,2-dimethoxy-2-phenyl acetophenone (DMPA) as the initiator. Only PVDF-HFP- and CTA-based PIMs were found to be successful (i.e., homogenous, transparent and mechanically stable). CTA-based PIMs showed a higher extraction rate than the PVDF-HFP-based PIMs and non-cross-linked PIMs containing the same base-polymer, and thus CTA was chosen as the base-polymer for a more detailed study. The effect of the polymer ratio (CTA:PEG-DMA), concentration of D2EHPA, and concentration of plasticizer (i.e., 2-nitrophenyloctyl ether (NPOE)) on the membrane performance was studied. Best performance in terms of stability, rate of extraction and extractive capacity, which were superior to the corresponding non-cross-linked PIM, was achieved with the cross-linked PIM composed of 40 wt% D2EHPA, 10 wt% NPOE, polymers ratio of 6:4 (CTA:PEG-DMA), and 0.6 wt% DMPA. The PIM surface morphology, examined by atomic force microscopy (AFM), correlated well with the rate of Zn(II) extraction. It was also demonstrated that the cross-linked PIM could selectively extract Zn(II) from aqueous solutions at pH 3.0 in the presence of other common base metal ions such as Cd(II), Co(II), Cu(II), and Ni(II) in concentrations 5 times higher than that of Zn(II). Interference from Fe(III) was removed by precipitation with phosphate. The newly developed PIM transported practically all Zn(II) from a feed solution at pH 3 to a 1.0 M HCl receiving solution as a result of the simultaneous extraction and back-extraction of Zn(II) at the corresponding PIM/solution interfaces, and the facilitated transport of Zn(II) across the membrane.

The use of polystyrene-block-polybutadiene-block-polystyrene triblock co-polymer (SBS) as the base-polymer of polymer inclusion membranes (PIMs) is studied for the first time. SBS is an inexpensive and accessible thermoplastic elastomer which possesses the required properties to be used as a base-polymer in PIMs, namely mechanical strength and high resistance to acids/bases. Its compatibility with commonly used extractants in PIMs was assessed and it was observed that successful PIMs could be obtained when di(2-ethylhexyl)phosphoric acid (D2EHPA), LIX84I or tri-n-octylamine (TOA) were used as the extractants. The performance of these PIMs was investigated for the extraction of Zn(II), Cu(II) and Cr(VI), respectively, although only the TOA-based PIMs did not perform well. Both D2EHPA- and LIX84I-based PIMs were characterized by water contact angle measurements, atomic force microscopy, differential scanning calorimetry, and Fourier transform infrared spectroscopy. In comparison with PIMs containing other base-polymers, the SBS-based PIMs were found to extract faster and more Zn(II) or Cu(II), and moreover, the LIX84I-based PIM did not require the inclusion of an expensive plasticizer unlike its counterparts containing other commonly used base-polymers. The stability of these PIMs was also assessed over three transport cycles (i.e., simultaneous extraction and back-extraction), and it was observed that the transport rate decreased significantly when using D2EHPA-based PIMs, and in the case of LIX84I-based membranes it stabilized after the first cycle.

A low cost and portable flow-through passive sampling device (PSD) which is not affected by the flow pattern of the sampled aquatic system was developed. Zn2+ was selected as the target analyte in optimizing and testing the device under laboratory conditions using as the source solution (SS) either Zn2+ solutions or environmental waters, spiked with Zn2+. It was demonstrated that the accumulated amount of Zn2+ in all sampling experiments with the newly developed PSD was independent of the flow pattern of the sampled SS which was in contrast with results obtained with previously developed dip-in and shielded dip-in passive samplers. The flow-through PSD consists of an acrylic-based 3D-printed flow-through compartment, a glass vessel containing the receiving solution (RS) and a polymer inclusion membrane which acts as a semipermeable barrier separating the RS from a stream of the sampled water (i.e., SS). The PIM was composed of 35 wt% commercial dinonylnaphthalene sulfonic acid (DNNS), 55 wt% poly(vinyl chloride) and 10 wt% 1-tetradecanol. Though in some of the experiments the SS was propelled through the PSD by a conventional peristaltic pump, unsuitable for use in the field, it was demonstrated that the replacement of the peristatic pump with a small battery-driven piezoelectric micro pump was straightforward and did not affect the performance of the PSD. This finding proves the suitability of the newly developed flow-through PSD as a cost effective and portable tool for passive sampling of environmental waters free of flow pattern effects.

A 3D metal-organic framework (MOF) having single-molecule magnet (SMM) linkers was prepared in crystalline form by using a tetrairon(III) complex functionalised with two divergent pyridyl groups, namely [Fe4 (pPy)2 (dpm)6 ] (1; H3 pPy=2-(hydroxymethyl)-2-(pyridin-4-yl)propane-1,3-diol, Hdpm=dipivaloylmethane). Reaction of 1 with silver(I) perchlorate afforded {[Fe4 (pPy)2 (dpm)6 ]2 Ag}ClO4 (2), which crystallises in a cubic face-centred lattice and exhibits two interlocked diamondoid networks. In 2, the SMMs act as linear ditopic synthons, and silver(I) ions as tetrahedral nodes coordinated by four pyridyl nitrogen atoms. The magnetic properties of 1 (S=5 and D≈-0.4 cm(-1) in the ground spin state) are largely preserved in 2, which shows slow magnetic relaxation with an anisotropy barrier of Ueff /kB =11.46(10) K in zero field and 14.25(8) K in an applied field of 1 kOe. However, crystal symmetry triggers highly noncollinear magnetic anisotropy contributions oriented at 109.47° from each other along the threefold axes of AgN4 tetrahedra, a unique scenario fully confirmed by a single-crystal cantilever torque magnetometry investigation. Magnetisation curves down to 0.03 K demonstrated the occurrence of a wide hysteresis loop when the magnetic field was swept along one of the four Ag-N bonds. By symmetry, the crystalline compound can then be persistently magnetised parallel or antiparallel to the four main diagonals of the unit cell, although the crystals have no overall second-order anisotropy.

We present direct evidence of enhanced non-radiative energy transfer between two J-aggregated cyanine dyes strongly coupled to the vacuum field of a cavity. Excitation spectroscopy and femtosecond pump-probe measurements show that the energy transfer is highly efficient when both the donor and acceptor form light-matter hybrid states with the vacuum field. The rate of energy transfer is increased by a factor of seven under those conditions as compared to the normal situation outside the cavity, with a corresponding effect on the energy transfer efficiency. The delocalized hybrid states connect the donor and acceptor molecules and clearly play the role of a bridge to enhance the rate of energy transfer. This finding has fundamental implications for coherent energy transport and light-energy harvesting.

Elucidation of the nature of hydrogen interactions with palladium nanoparticles is expected to play an important role in the development of new catalysts and hydrogen-storage nanomaterials. A facile scaled-up synthesis of uniformly sized single-crystalline palladium nanoparticles with various shapes, including regular nanocubes, nanocubes with protruded edges, rhombic dodecahedra, and branched nanoparticles, all stabilized with a mesoporous silica shell is developed. Interaction of hydrogen with these nanoparticles is studied by using temperature-programmed desorption technique and by performing density functional theory modeling. It is found that due to favorable arrangement of Pd atoms on their surface, rhombic dodecahedral palladium nanoparticles enclosed by {110} planes release a larger volume of hydrogen and have a lower desorption energy than palladium nanocubes and branched nanoparticles. These results underline the important role of {110} surfaces in palladium nanoparticles in their interaction with hydrogen. This work provides insight into the mechanism of catalysis of hydrogenation/dehydrogenation reactions by palladium nanoparticles with different shapes.

The magnetic behaviour of a Dy(LH)3 complex (LH(-) is the anion of 2-hydroxy-N'-[(E)-(2-hydroxy-3-methoxyphenyl)methylidene]benzhydrazide) was analysed in depth from both theoretical and experimental points of view. Cantilever torque magnetometry indicated that the complex has Ising-type anisotropy, and provided two possible directions for the easy axis of anisotropy due to the presence of two magnetically non-equivalent molecules in the crystal. Ab initio calculations confirmed the strong Ising-type anisotropy and disentangled the two possible orientations. The computed results obtained by using ab initio calculations were then used to rationalise the composite dynamic behaviour observed for both pure Dy(III) phase and Y(III) diluted phase, which showed two different relaxation channels in zero and non-zero static magnetic fields. In particular, we showed that the relaxation behaviour at the higher temperature range can be correctly reproduced by using a master matrix approach, which suggests that Orbach relaxation is occurring through a second excited doublet.

Device scale-up and long-term stability constitute two major hurdles that the emerging perovskite solar technology will have to overcome before commercialization. Here, a comparative study was performed between ZnO and TiO2 electron-selective layers, two materials that allow the low-temperature processing of perovskite solar cells on polymer substrates. Although the use of TiO2 is well established on glass substrates, ZnO was chosen because it can be readily printed at low temperature and offers the potential for the large-scale roll-to-roll manufacturing of flexible photovoltaics at a low cost. However, a rapid degradation of CH3 NH3 PbI3 was observed if it was deposited on ZnO, therefore, the influence of the perovskite film preparation conditions on its morphology and degradation kinetics was investigated. This study showed that CH3 NH3 PbI3 could withstand a higher temperature on TiO2 than ZnO and that TiO2-based perovskite devices were more stable than their ZnO analogues.

α-Bromo aluminium acetals are suitable substrates for Ueno-Stork-like radical cyclisations affording γ-lactols and acid-sensitive methylene-γ-lactols in high yields. The mechanistic study herein sets the scope and limitation of this reaction. The influence of the halide (or chalcogenide) atom X (X=Cl, Br, I, SPh, SePh) in the precursors α-haloesters, as well as influence of the solvent and temperature was studied. The structure of the aluminium acetal intermediates resulting from the reduction of the corresponding α-haloesters has been investigated by low-temperature (13) C-INEPT diffusion-ordered NMR spectroscopy (DOSY) experiments and quantum calculations, providing new insights into the structures of these thermally labile intermediates. Oxygen-bridged dimeric structures with a planar Al2 O2 ring are proposed for the least hindered aluminium acetals, while monomeric structures seem to prevail for the most hindered species. A comparison against the radical cyclisation of aluminium acetals derived from allyl and propargyl alcohols with the parent Ueno-Stork has been made at the BHandHLYP/6-311++G(d,p) level of theory, highlighting mechanistic similarities and differences.

The mechanism of the recently described N→C direction peptide synthesis through silver-promoted coupling of N-protected amino acids with thioacetylated amino esters was explored by using density functional theory. Calculation of the potential energy surfaces for various pathways revealed that the reaction proceeds through silver-assisted addition of the carboxylate to the thioamide, which is followed by deprotonation and silver-mediated extrusion of sulfur as Ag2 S. The resulting isoimide is the key intermediate, which subsequently rearranges to an imide through a concerted pericyclic [1,3]-acyl shift (O-sp(2) N 1,3-acyl migration). The proposed mechanism clearly emphasises the requirement of two equivalents of Ag(I) and basic reaction conditions, which is in full agreement with the experimental findings. Alternative rearrangement pathways involving only one equivalent of Ag(I) or through O-sp(3) N 1,3-acyl migration can be excluded. The computations further revealed that peptide couplings involving thioformamides require significant conformational changes in the intermediate isoformimide, which slow down the rearrangement process.

The loss of internal pores, a process known as physical aging, inhibits the long-term use of the most promising gas-separation polymers. Previously we reported that a porous aromatic framework (PAF-1) could form a remarkable nanocomposite with gas-separation polymers to stop aging. However, PAF-1 synthesis is very onerous both from a reagent and reaction-condition perspective, making it difficult to scale-up. We now reveal a highly dispersible and scalable additive based on α,α'-dichloro-p-xylene (p-DCX), that inhibits aging more effectively, and crucially almost doubles gas-transport selectivity. These synergistic effects are related to the intimately mixed nanocomposite that is formed though the high dispersibility of p-DCX in the gas-separation polymer. This reduces particle-size effects and the internal free volume is almost unchanged over time. This study shows this inexpensive and scalable polymer additive delivers exceptional gas-transport performance and selectivity.

The ultrasonic irradiation of aqueous solution is demonstrated to be a suitable source of initiating radicals for a controlled radical polymerization when conducted in the presence of a thiocarbonylthio-containing reversible addition–fragmentation chain transfer (RAFT) agent. This allows for a highly “green” method of externally regulated/controlled polymerization with a potentially broad scope for polymerizable monomers and/or polymer structures.

Silver nanowires have attracted considerable attention as subdiffraction limited diameter waveguides in a variety of applications including cell endoscopy and photonic integrated circuitry. Optical signal transport occurs by coupling light into propagating surface plasmons, which scatter back into light further along the wire. However, these interconversions only occur efficiently at wire ends, or at defects along the wire, which are not controlled during synthesis. Here, we overcome this limitation, demonstrating the visible laser light-induced fabrication of gold nanostructures at desired positions on silver nanowires, and their utility as efficient in/out coupling points for light. The gold nanostructures grow via plasmon-induced reduction of Au(III) and are shown to be excellent "hotspots" for surface-enhanced Raman scattering.

Mannosidases are a diverse group of enzymes that are important in the biological processing of mannose-containing polysaccharides and complex glycoconjugates. They are found in 12 of the >160 sequence-based glycosidase families. We discuss evidence that nature has evolved a small set of common mechanisms that unite almost all of these mannosidase families. Broadly, mannosidases (and the closely related rhamnosidases) perform catalysis through just two conformations of the oxocarbenium ion-like transition state: a B2,5 (or enantiomeric 2,5B) boat and a 3H4 half-chair. This extends to a new family (GT108) of GDPMan-dependent β-1,2-mannosyltransferases/phosphorylases that perform mannosyl transfer through a boat conformation as well as some mannosidases that are metalloenzymes and require divalent cations for catalysis. Yet, among this commonality lies diversity. New evidence shows that one unique family (GH99) of mannosidases use an unusual mechanism involving anchimeric assistance via a 1,2-anhydro sugar (epoxide) intermediate.

Deprotonated para-coumaric acid is commonly considered as a model for the chromophore in photoactive yellow protein, which undergoes E → Z isomerization following absorption of blue light. Here, tandem ion mobility mass spectrometry is coupled with laser excitation to study the photochemistry of deprotonated para-coumaric acid, to show that the E isomers of the phenoxide and carboxylate forms have distinct photochemical responses with maxima in their action spectra at 430 and 360 nm, respectively. The E isomer of the phenoxide anion undergoes efficient autodetachment upon excitation of its lowest ππ* transition. For the E isomer of the carboxylate deprotomer, a one-way photoinitiated proton transfer generates the phenoxide deprotomer through a mechanism postulated to involve an excited-state enol–keto tautomerism followed by a series of ground-state rearrangements including a second proton transfer. This mechanism is supported by experiments in which the relevant intermediate keto isomer is prepared and spectroscopically probed and through master equation modeling of possible ground-state isomerization processes. The Z isomer of the carboxylate deprotomer shows a weak Z → E photoisomerization response that occurs in competition with photodestruction (presumably electron detachment), demonstrating that the E and Z isomers undergo different processes in their excited states. The study highlights the utility of isomer-selective spectroscopy for characterizing the photochemistry of isolated anions possessing multiple deprotonation sites.

The photoinduced excited state dynamics of gas-phase trans-retinoate (deprotonated trans-retinoic acid, trans-RA-) are studied using tandem ion mobility spectrometry coupled with laser spectroscopy, and frequency-, angle- and time-resolved photoelectron imaging. Photoexcitation of the bright S3(ππ*) ← S0 transition leads to internal conversion to the S1(ππ*) state on a ≈80 fs timescale followed by recovery of S0 and concomitant isomerisation to give the 13-cis (major) and 9-cis (minor) photoisomers on a ≈180 fs timescale. The sub-200 fs stereoselective photoisomerisation parallels that for the retinal protonated Schiff base chromophore in bacteriorhodopsin. Measurements on trans-RA- in methanol using the solution photoisomerisation action spectroscopy technique show that 13-cis-RA- is also the principal photoisomer, although the 13-cis and 9-cis photoisomers are formed with an inverted branching ratio with photon energy in methanol when compared with the gas phase, presumably due to solvent-induced modification of potential energy surfaces and inhibition of electron detachment processes. Comparison of the gas-phase time-resolved data with transient absorption spectroscopy measurements on retinoic acid in methanol suggest that photoisomerisation is roughly six times slower in solution. This work provides clear evidence that solvation significantly affects the photoisomerisation dynamics of retinoid molecules.

Substituted naphthalene anions (deprotonated 2-naphthol and 6-hydroxy-2-naphthoic acid) are spectroscopically probed in a tandem drift tube ion mobility spectrometer (IMS). Target anions are selected according to their drift speed through nitrogen buffer gas in the first IMS stage before being exposed to a pulse of tunable light that induces either photodissociation or electron photodetachment, which is conveniently monitored by scavenging the detached electrons with trace SF6 in the buffer gas. The photodetachment action spectrum of the 2-naphtholate anion exhibits a band system spanning 380-460 nm with a prominent series of peaks spaced by 440 cm-1, commencing at 458.5 nm, and a set of weaker peaks near the electron detachment threshold corresponding to transitions to dipole-bound states. The two deprotomers of 6-hydroxy-2-naphthoic acid are separated and spectroscopically probed independently. The molecular anion formed from deprotonation of the hydroxy group gives rise to a photodetachment action spectrum similar to that of the 2-naphtholate anion with an onset at 470 nm and a maximum at 420 nm. Near the threshold, the photoreaction with SF6 is observed with displacement of an OH group by an F atom. In contrast, the anion formed from deprotonation of the carboxylic acid group gives rise to a photodissociation action spectrum, recorded on the CO2 loss channel, lying at much shorter wavelengths with an onset at 360 nm and maximum photoresponse at 325 nm.

UV-illumination of phase-separated surfactant films prepared from mixtures of photopolymerizable 10,12-pentacosadiynoic acid and perfluorotetradecanoic acid results in the formation of fluorescent polydiacetylene fibers and aggregates. In this work, the orientation of polymer strands that comprise the resulting photopolymer structures has been probed using fluorescence anisotropy imaging in combination with defocused single-molecule fluorescence imaging. Imaging experiments indicate the presence of significant fiber-to-fiber heterogeneity, as well as anisotropy within each fiber (or aggregate), with both of these properties changing as a function of film preparation conditions. This anisotropy can be attributed to various alignments of the constituent polymer strands that comprise the larger fibers and aggregates. Intriguingly, when using defocused imaging, fiber images consisted of a series of discrete “doughnut” fluorescence emission patterns, which exhibited intermittent on–off blinking behavior; both of these properties are characteristic of individual emission transition dipoles (single molecules). Further, all of the individual emission transition dipoles had a uniform orientation with respect to the axis of the fiber, indicating a common orientation of discrete emitters in the larger polymer fiber. The implications of these results for future studies of the electronic properties of conjugated polymers in larger macroscopic systems are noted.

The mitochondrial inner membrane contains a unique phospholipid known as cardiolipin (CL), which stabilises the protein complexes embedded in the membrane and supports its overall structure. Recent evidence indicates that the mitochondrial ribosome may associate with the inner membrane to facilitate co-translational insertion of the hydrophobic oxidative phosphorylation (OXPHOS) proteins into the inner membrane. We generated three mutant knockout cell lines for the CL biosynthesis gene Crls1 to investigate the effects of CL loss on mitochondrial protein synthesis. Reduced CL levels caused altered mitochondrial morphology and transcriptome-wide changes that were accompanied by uncoordinated mitochondrial translation rates and impaired respiratory chain supercomplex formation. Aberrant protein synthesis was caused by impaired formation and distribution of mitochondrial ribosomes. Reduction or loss of CL resulted in divergent mitochondrial and endoplasmic reticulum stress responses. We show that CL is required to stabilise the interaction of the mitochondrial ribosome with the membrane via its association with OXA1 (also known as OXA1L) during active translation. This interaction facilitates insertion of newly synthesised mitochondrial proteins into the inner membrane and stabilises the respiratory supercomplexes.

Vibrational polaritonic chemistry is emerging as an exciting new sub‐field of chemistry, one in which strong interactions with optical cavity vacuum fields are another degree of freedom alongside temperature, solvent, catalyst, and so on to modify thermochemical reactivity. The field stands at a fascinating juncture with experimental works on a variety of organic reactions continuing to blossom, just as many theoretical works appear which diverge significantly in their predictions compared to experiments. The outlook for the field is no doubt an exciting one as it seeks to unify the observed novel optical cavity‐induced chemical phenomena with satisfying accompanying physical theory. In this minireview we highlight experimental works on vibrational polaritonic chemistry that have appeared most recently, focusing on the chemistry of the rate‐limiting steps to provide mechanistic insight. We hope this review will encourage synthetic chemists to enter the field and we discuss the opportunities and challenges that lie ahead as polaritonic chemistry grows into the future.

Parasitic protists belonging to the genus Leishmania synthesize the non-canonical carbohydrate reserve, mannogen, which is composed of β-1,2-mannan oligosaccharides. Here, we identify a class of dual-activity mannosyltransferase/phosphorylases (MTPs) that catalyze both the sugar nucleotide-dependent biosynthesis and phosphorolytic turnover of mannogen. Structural and phylogenic analysis shows that while the MTPs are structurally related to bacterial mannan phosphorylases, they constitute a distinct family of glycosyltransferases (GT108) that have likely been acquired by horizontal gene transfer from gram-positive bacteria. The seven MTPs catalyze the constitutive synthesis and turnover of mannogen. This metabolic rheostat protects obligate intracellular parasite stages from nutrient excess, and is essential for thermotolerance and parasite infectivity in the mammalian host. Our results suggest that the acquisition and expansion of the MTP family in Leishmania increased the metabolic flexibility of these protists and contributed to their capacity to colonize new host niches.