School of Chemistry - Research Publications
Permanent URI for this collection
Search Results
1 - 10 of 1327
-
ItemA reflective display based on the electro-microfluidic assembly of particles within suppressed water-in-oil droplet array(SPRINGERNATURE, 2023-12-05)Reflective displays have stimulated considerable interest because of their friendly readability and low energy consumption. Herein, we develop a reflective display technique via an electro-microfluidic assembly of particles (eMAP) strategy whereby colored particles assemble into annular and planar structures inside a dyed water droplet to create "open" and "closed" states of a display pixel. Water-in-oil droplets are compressed within microwells to form a pixel array. The particles dispersed in droplets are driven by deformation-strengthened dielectrophoretic force to achieve fast and reversible motion and assemble into multiple structures. This eMAP based device can display designed information in three primary colors with ≥170° viewing angle, ~0.14 s switching time, and bistability with an optimized material system. This proposed technique demonstrates the basis of a high-performance and energy-saving reflective display, and the display speed and color quality could be further improved by structure and material optimization; exhibiting a potential reflective display technology.
-
ItemUnravelling the mechanism of neurotensin recognition by neurotensin receptor 1(NATURE PORTFOLIO, 2023-12-09)The conformational ensembles of G protein-coupled receptors (GPCRs) include inactive and active states. Spectroscopy techniques, including NMR, show that agonists, antagonists and other ligands shift the ensemble toward specific states depending on the pharmacological efficacy of the ligand. How receptors recognize ligands and the kinetic mechanism underlying this population shift is poorly understood. Here, we investigate the kinetic mechanism of neurotensin recognition by neurotensin receptor 1 (NTS1) using 19F-NMR, hydrogen-deuterium exchange mass spectrometry and stopped-flow fluorescence spectroscopy. Our results indicate slow-exchanging conformational heterogeneity on the extracellular surface of ligand-bound NTS1. Numerical analysis of the kinetic data of neurotensin binding to NTS1 shows that ligand recognition follows an induced-fit mechanism, in which conformational changes occur after neurotensin binding. This approach is applicable to other GPCRs to provide insight into the kinetic regulation of ligand recognition by GPCRs.
-
ItemMicroglial ferroptotic stress causes non-cell autonomous neuronal death(BMC, 2024-02-05)BACKGROUND: Ferroptosis is a form of regulated cell death characterised by lipid peroxidation as the terminal endpoint and a requirement for iron. Although it protects against cancer and infection, ferroptosis is also implicated in causing neuronal death in degenerative diseases of the central nervous system (CNS). The precise role for ferroptosis in causing neuronal death is yet to be fully resolved. METHODS: To elucidate the role of ferroptosis in neuronal death we utilised co-culture and conditioned medium transfer experiments involving microglia, astrocytes and neurones. We ratified clinical significance of our cell culture findings via assessment of human CNS tissue from cases of the fatal, paralysing neurodegenerative condition of amyotrophic lateral sclerosis (ALS). We utilised the SOD1G37R mouse model of ALS and a CNS-permeant ferroptosis inhibitor to verify pharmacological significance in vivo. RESULTS: We found that sublethal ferroptotic stress selectively affecting microglia triggers an inflammatory cascade that results in non-cell autonomous neuronal death. Central to this cascade is the conversion of astrocytes to a neurotoxic state. We show that spinal cord tissue from human cases of ALS exhibits a signature of ferroptosis that encompasses atomic, molecular and biochemical features. Further, we show the molecular correlation between ferroptosis and neurotoxic astrocytes evident in human ALS-affected spinal cord is recapitulated in the SOD1G37R mouse model where treatment with a CNS-permeant ferroptosis inhibitor, CuII(atsm), ameliorated these markers and was neuroprotective. CONCLUSIONS: By showing that microglia responding to sublethal ferroptotic stress culminates in non-cell autonomous neuronal death, our results implicate microglial ferroptotic stress as a rectifiable cause of neuronal death in neurodegenerative disease. As ferroptosis is currently primarily regarded as an intrinsic cell death phenomenon, these results introduce an entirely new pathophysiological role for ferroptosis in disease.
-
ItemNo Preview AvailableEvidence for decreased copper associated with demyelination in the corpus callosum of cuprizone-treated mice(OXFORD UNIV PRESS, 2024-01-05)Demyelination within the central nervous system (CNS) is a significant feature of debilitating neurological diseases such as multiple sclerosis and administering the copper-selective chelatorcuprizone to mice is widely used to model demyelination in vivo. Conspicuous demyelination within the corpus callosum is generally attributed to cuprizone's ability to restrict copper availability in this vulnerable brain region. However, the small number of studies that have assessed copper in brain tissue from cuprizone-treated mice have produced seemingly conflicting outcomes, leaving the role of CNS copper availability in demyelination unresolved. Herein we describe our assessment of copper concentrations in brain samples from mice treated with cuprizone for 40 d. Importantly, we applied an inductively coupled plasma mass spectrometry methodology that enabled assessment of copper partitioned into soluble and insoluble fractions within distinct brain regions, including the corpus callosum. Our results show that cuprizone-induced demyelination in the corpus callosum was associated with decreased soluble copper in this brain region. Insoluble copper in the corpus callosum was unaffected, as were pools of soluble and insoluble copper in other brain regions. Treatment with the blood-brain barrier permeant copper compound CuII(atsm) increased brain copper levels and this was most pronounced in the soluble fraction of the corpus callosum. This effect was associated with significant mitigation of cuprizone-induced demyelination. These results provide support for the involvement of decreased CNS copper availability in demyelination in the cuprizone model. Relevance to human demyelinating disease is discussed.
-
ItemNo Preview AvailableEnergy dissipation during homogeneous wetting of surfaces with randomly and periodically distributed cylindrical pillars(ACADEMIC PRESS INC ELSEVIER SCIENCE, 2024-04)HYPOTHESIS: Understanding contact angle hysteresis on rough surfaces is important as most industrially relevant and naturally occurring surfaces possess some form of random or structured roughness. We hypothesise that hysteresis can be described by the dilute defect model of Joanny & de Gennes [1] and that the energy dissipation occurring during the stick-slip motion of the contact line is key to developing a predictive equation for hysteresis. EXPERIMENTS: We measured hysteresis on surfaces with randomly distributed and periodically arranged microscopic cylindrical pillars for a variety of different liquids in air. The inherent (flat surface) contact angles tested range from lyophilic (θe=33.8°) to lyophobic (θe=112.0°). FINDINGS: A methodology for averaging the measured advancing and receding contact angles on random surfaces is presented. Based on these results correlations for roughness-induced energy dissipation are derived, and an equation for predicting the advancing and receding contact angles during homogeneous (Wenzel) wetting on random surfaces is presented. Equations that predict the onset of the alternate wetting conditions of hemiwicking, split-advancing, split-receding and heterogeneous (Cassie) wetting are also derived, thus defining the range of validity for the homogeneous wetting equation. A 'cluster' concept is proposed to explain the measurably higher hysteresis exhibited by structured surfaces compared to random surfaces.
-
ItemNo Preview AvailableTotal Synthesis of Icumazole A Using a Modified Cadiot-Chodkiewicz Coupling(AMER CHEMICAL SOC, 2024-01-29)The first total synthesis of myxobacteria metabolite icumazole A (1) is reported. Key steps in the route include an organocatalyzed asymmetric self-aldol reaction followed by an acetate aldol reaction to form the stereotriad present in the oxazole moiety, an intramolecular Diels-Alder reaction to form the isochromanone, and an acetylide addition and selective methylation. The final steps involved a high-yielding modified Cadiot-Chodkiewicz coupling and stereoselective reduction to secure the Z,Z-diene and afford 1.
-
ItemNo Preview AvailableTuning valence tautomerism in a family of dinuclear cobalt complexes incorporating a conjugated bridging bis(dioxolene) ligand with weak communication(ROYAL SOC CHEMISTRY, 2024-02-13)Valence tautomerism (VT) involves the stimulated reversible intramolecular electron transfer between a redox-active metal and ligand. Dinuclear cobalt complexes bridged by bis(dioxolene) ligands can undergo thermally-induced VT with access to {CoIII-cat-cat-CoIII}, {CoIII-cat-SQ-CoII} and {CoII-SQ-SQ-CoII} states (cat2- = catecholate, SQ˙- = semiquinonate, CoIII refers to low spin CoIII, CoII refers to high spin CoII). The resulting potential for two-step VT interconversions offers increased functionality over mononuclear examples. In this study, the bis(dioxolene) ligand 3,3',4,4'-tetrahydroxy-5,5'-dimethoxy-benzaldazine (thMH4) was paired with Mentpa (tpa = tris(2-pyridylmethyl)amine, n = 0-3 corresponds to methylation at 6-position of the pyridine rings) to afford [{Co(Mentpa)}2(thM)](PF6)2 (1a, n = 0; 2a, n = 2; 3a, n = 3). Structural, magnetic susceptibility and spectroscopic data show that 1a and 3a remain in the temperature invariant {CoIII-cat-cat-CoIII} and {CoII-SQ-SQ-CoII} forms in the solid state, respectively. In contrast, 2a exhibits incomplete thermally-induced VT between these two tautomeric forms via the mixed {CoIII-cat-SQ-CoII} tautomer. In solution, room temperature electronic absorption spectra are consistent with the assignments from the solid-state, with VT observed only for 2a. From electrochemistry, the proximity of the two 1e--processes for the thMn- ligand indicates weak electronic communication between the two dioxolene units, supporting the potential for a two-step VT interconversion in thMn- containing complexes. Comparison of the redox potentials of the Co and thMn- processes suggests that only 2a has these processes in sufficient proximity to afford the thermally-induced VT observed experimentally. Density functional theory calculations are consistent with the prerequisite energy ordering for a two-step transition for 2a, and temperature invariant {CoIII-cat-cat-CoIII} and {CoII-SQ-SQ-CoII} states for 1a and 3a, respectively. This work presents the third example, and the first formally conjugated example, of a bridging bis(dioxolene) ligand that can afford two-step VT in a Co complex, suggesting new possibilities towards applications based on multistep switching.
-
ItemNo Preview AvailableA framework for multiexcitonic logic(NATURE PORTFOLIO, 2024-02)Exciton science sits at the intersection of chemical, optical and spin-based implementations of information processing, but using excitons to conduct logical operations remains relatively unexplored. Excitons encoding information could be read optically (photoexcitation-photoemission) or electrically (charge recombination-separation), travel through materials via exciton energy transfer, and interact with one another in stimuli-responsive molecular excitonic devices. Excitonic logic offers the potential to mediate electrical, optical and chemical information. Additionally, high-spin triplet and quintet (multi)excitons offer access to well defined spin states of relevance to magnetic field effects, classical spintronics and spin-based quantum information science. In this Roadmap, we propose a framework for developing excitonic computing based on singlet fission (SF) and triplet-triplet annihilation (TTA). Various molecular components capable of modulating SF/TTA for logical operations are suggested, including molecular photo-switching and multi-colour photoexcitation. We then outline a pathway for constructing excitonic logic devices, considering aspects of circuit assembly, logical operation synchronization, and exciton transport and amplification. Promising future directions and challenges are identified, and the potential for realizing excitonic computing in the near future is discussed.
-
ItemNo Preview AvailableDirect measurement of the structural change associated with amorphous solidification using static scattering of coherent radiation(AIP Publishing, 2023-12-28)In this paper, we demonstrate that the weak temperature dependence of the structure factor of supercooled liquids, a defining feature of the glass transition, is a consequence of the averaging of the scattering intensity due to angular averaging. We show that the speckle at individual wavevectors, calculated from a simulated glass former, exhibits a Debye-Waller factor with a sufficiently large temperature dependence to represent a structural order parameter capable of distinguishing liquid from glass. We also extract from the speckle intensities a quantity proportional to the variance of the local restraint, i.e., a direct experimental measure of the amplitude of structural heterogeneity.
-
ItemNo Preview AvailableElectrophoretic Deposition of Single Nanoparticles(AMER CHEMICAL SOC, 2024-02-01)The controlled assembly of colloid particles on a solid substrate has always been a major challenge in colloid and surface science. Here we provide an overview of electrophoretic deposition (EPD) of single charge-stabilized nanoparticles. We demonstrate that surface templated EPD (STEPD) assembly, which combines EPD with top-down nanofabrication, allows a wide range of nanoparticles to be built up into arbitrary structures with high speed, scalability, and excellent fidelity. We will also discuss some of the current colloid chemical limitations and challenges in STEPD assembly for sub-10 nm nanoparticles and for the fabrication of densely packed single particle arrays.