| dc.contributor.author | Macmillan, R. H. | en_US |
| dc.date.accessioned | 2014-05-22T10:05:07Z | |
| dc.date.available | 2014-05-22T10:05:07Z | |
| dc.date.issued | 2003 | en_US |
| dc.date.submitted | 2003-10-15 | en_US |
| dc.identifier.citation | Macmillan, R. H. (2003) Locally made equipment for teaching and research in agricultural engineering. Manual No.3. Tillage dynamometer. | en_US |
| dc.identifier.uri | http://hdl.handle.net/11343/33760 | |
| dc.description | © 2003 R.H. Macmillan
Author contact: rhmacm@unimelb.edu.au | en_US |
| dc.description.abstract | This eprint provides information on the design and use of this equipment for teaching and research.
This manual, which is one of a series on locally made equipment for teaching and research in agricultural engineering, describes a dynamometer for measuring the draught forces on tillage tools with a single force cell. The dynamometer is specified by means of construction drawings. Sources of supply for purchased components are given, together with the method of analysing and using the dynamometer. | en_US |
| dc.format | application/pdf | en_US |
| dc.language | eng | en_US |
| dc.subject | Tillage | en_US |
| dc.subject | cultivation | en_US |
| dc.subject | tools | en_US |
| dc.subject | draft force | en_US |
| dc.subject | dynamometer | en_US |
| dc.subject | active frame | en_US |
| dc.subject | measurement | en_US |
| dc.subject | teaching | en_US |
| dc.subject | research | en_US |
| dc.title | Locally made equipment for teaching and research in agricultural engineering. Manual No.3. Tillage dynamometer | en_US |
| dc.type | Preprint | en_US |
| melbourne.peerreview | Non Peer Reviewed | en_US |
| melbourne.affiliation.department | Engineering: International Development Technologies Centre | en_US |
| melbourne.elementsid | NA | |
| melbourne.contributor.author | MacMillan, Ross | |
| melbourne.accessrights | Open Access | |
