Show simple item record

dc.contributor.authorMacmillan, R. H.en_US
dc.date.accessioned2014-05-22T10:05:41Z
dc.date.available2014-05-22T10:05:41Z
dc.date.issued2003en_US
dc.date.submitted2003-10-15en_US
dc.identifier.citationMacmillan, R. H. (2003) Locally made equipment for teaching and research in agricultural engineering. Manual No.6. Measurement of air flow with orifice plates.en_US
dc.identifier.urihttp://hdl.handle.net/11343/33763
dc.description© 2003 R.H. Macmillan Author contact: rhmacm@unimelb.edu.auen_US
dc.description.abstractThis eprint provides information on the use of this equipment for teaching and research. This manual, which is one of a series on locally made equipment for teaching and research in agricultural engineering, presents data for the selection of an orifice plate diameter to measure air flow with a given pressure drop and the method of calculation of air flow rate for a given orifice plate with a measured pressure drop.en_US
dc.formatapplication/pdfen_US
dc.languageengen_US
dc.subjectequipmenten_US
dc.subjectteachingen_US
dc.subjectresearchen_US
dc.subjectagricultural engineeringen_US
dc.subjectair flowen_US
dc.subjectmeasurementen_US
dc.subjectpipesen_US
dc.subjectorifice plateen_US
dc.subjectpressure dropen_US
dc.titleLocally made equipment for teaching and research in agricultural engineering. Manual No.6. Measurement of air flow with orifice platesen_US
dc.typePreprinten_US
melbourne.peerreviewNon Peer Revieweden_US
melbourne.affiliation.departmentEngineering: International Development Technologies Centreen_US
melbourne.elementsidNA
melbourne.contributor.authorMacMillan, Ross
melbourne.accessrightsOpen Access


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record