Rheological characterisation of nickel laterite slurry in processing environments
Loading...
Citations
Altmetric:
Altmetric::
Associated Records
Authors
File Licence
Editors
Date
2006
Source Title
Journal Title
Journal ISSN
Volume Title
Publisher
Melbourne Authors
Affiliation
Faculty of Engineering, Chemical and Biomolecular Engineering
Document Type
Masters Research thesis
Subject Code
Citation
Fisher, D. T. (2006). Rheological characterisation of nickel laterite slurry in processing environments. Masters Research thesis, Faculty of Engineering, Chemical and Biomolecular Engineering, The University of Melbourne.
Access Status
Open Access
DOI
Access URL
Open Access URL
Open Access at PMC
Linked Resource URL
NHMRC Grant Code
ARC Grant Code
Description
© 2006 Daniel Thomas Fisher
Abstract
With China’s continuing economic boom, the demand for nickel has seen unprecedented growth over the past 10 years. Most of the world’s nickel is present in nickel laterite deposits. These high volume, low grade deposits are now being exploited and processed. An understanding of nickel laterite rheology and the ability to obtain meaningful rheological data is essential to process intensification and stability.
The properties and physical characteristics of 8 industrial nickel laterite slurries as well as two alumina slurries were examined using various rheological techniques. The samples chosen covered a wide range of physical conditions such as differing pH, particle size distributions, solids densities and mineralogy as well as country and deposit of origin. The rheological parameters investigated were the yield stress and shear stress vs. shear rate of the particulate slurries. Considerable attention was focused on the techniques used in shear stress vs. shear rate characterisation, including capillary rheometry, smooth and roughened cup and bob rheometry and the vane in infinite medium technique.
This work confirmed the finding of previous works, showing nickel laterite slurry rheological behaviour ranging from time independent to thixotropic to rheopectic. It found the vane in infinite medium technique highly suitable for testing nickel laterites at process relevant yield stresses. This technique gave data that correlated well with vane yield stresses and capillary rheometry data. Cup and bob tests showed significant slip at lower shear rates. In a number of cases, the cup and bob techniques also showed erroneously high stresses at higher shear rates.
The vane yield stress was found to be a fast and accurate method for monitoring nickel laterite sample aging and the samples tested exhibited 100 Pa yield stresses at solids fractions ranging from 0.389 to 0.524. Blending of nickel laterites was found to be nonlinear, and confirmed that characterisation at various blend ratios is necessary if blending is to be utilised during production.
Notes
Terms of Use
Keywords
nickel, laterite, slag composition, mines, mining, rheology